Author Topic: 490 590 325 55 5000 500 bore mm (Read 294 times)

Cut4fun · « **on:** January 24, 2012, 03:35:04 pm »

Seems some are spreading wrong bore mm info.

Here is my concrete info from saws I have owned and some worked on.

490 44mm closed

590 45mm closed

325 46mm closed early, later 46mm open

55 46mm open and 45mm closed

5000 44mm open

5000+ 44mm closed

500 44mm open

500 formula 45mm open

nmurph · « **Reply #1 on:** January 24, 2012, 05:01:08 pm »

I have a 325 with a 44mm CP. I certainly can't saw it is original, but it definitely had been on the saw for a long time.

Cut4fun . · « **Reply #2 on:** January 24, 2012, 05:21:39 pm »

325 came with 46mm. You can put 44 45 46 on them with no problems.

rms61moparman · « **Reply #3 on:** January 24, 2012, 05:59:38 pm »

I'm glad you posted this because I was under the impression that the PP 325 came with a 45 CLOSED early and a 46 OPEN in later production.

I guess if they had a 46 closed in the early stages, that would be the Holy Grail of those cylinders.

Mike

Cut4fun . · « **Reply #4 on:** January 24, 2012, 06:09:53 pm »

My type 1 325 is closed 46mm 53cc. Mark might have a like new type 1.

Cut4fun . · « **Reply #5 on:** January 24, 2012, 06:25:28 pm »

Just to clarify I havent opened a type 2 325 up.

I have only seen the type 2 replacement p+c you can still buy that is open port with solid piston that looks like a 55 husky 46mm also.

Cut4fun . · « **Reply #6 on:** January 24, 2012, 07:04:09 pm »

This is the replacement cylinder for 325 503609102 the old part number was 503538502 hopefully I didnt confuse those.

Chainsaw Repair

News:

Author Topic: 490 590 325 55 5000 500 bore mm (Read 294 times)

Cut4fun

490 590 325 55 5000 500 bore mm

nmurph

Re: 490 590 325 55 5000 500 bore mm

Cut4fun .

Re: 490 590 325 55 5000 500 bore mm

rms61moparman

Re: 490 590 325 55 5000 500 bore mm

Cut4fun .

Re: 490 590 325 55 5000 500 bore mm

Cut4fun .

Re: 490 590 325 55 5000 500 bore mm

Cut4fun .

Re: 490 590 325 55 5000 500 bore mm

Related Topics