Author Topic: Poulan 2800  (Read 1193 times)

0 Members and 0 Guests are viewing this topic.

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Poulan 2800
« on: March 28, 2013, 05:53:40 pm »
so gotsed me a little time today to pull the other 2800 down for new bearings. not too bad, the paint is now gone from inside the crankcase, it was basicly all peeled off anyway.



a little leak in this area. common.


getting rid of the oiler gear.




TAAAA DAAAAAH!


some new stuff that'll be going in.


have it all cleaned and ready to go, but it aint happening tonight. gotta dinner to be at :)
when I grow up, i wanna be an adult.

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: another 2800
« Reply #1 on: March 28, 2013, 08:03:49 pm »
Nice!   

Your gear puller looks way different then the one I use (is this one  a combination of 2 tools you've put together)? Does it work on 330 365 3750 etc oiler gears too?

Gear puller I'm using bottom left.

REDNECK Saw Repair Getter Done

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: another 2800
« Reply #2 on: March 28, 2013, 08:07:27 pm »
husky 55 oiler gear puller :) screwed on nice and snug. only needed hand pressure to twist it off.
when I grow up, i wanna be an adult.

Offline fastleo151

  • 5 cube
  • ***
  • Posts: 103
  • Karma: 8
Re: another 2800
« Reply #3 on: March 28, 2013, 08:48:59 pm »
I need one of them pullers,  were be they at?????

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: another 2800
« Reply #4 on: March 28, 2013, 09:07:32 pm »
go on in to yer husky dealer and ask ;) that where i bought mine.
when I grow up, i wanna be an adult.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: another 2800
« Reply #5 on: March 28, 2013, 10:35:29 pm »
Mine was about $4 at Mowers4u  online website with phone # too http://www.mowers4u.com/

ebay store  http://stores.ebay.com/Mowers4u
REDNECK Saw Repair Getter Done

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: another 2800
« Reply #6 on: March 29, 2013, 08:11:51 am »
i was going to order one over the interweb, however it was going to cost more for the shipping than to get it localy. and the thing about this husky one, all i need to do is order the sheaves (6 bux each) and can take any and all gears off. i have 4 of them and haven't had a problem finding the right one to do the job.
when I grow up, i wanna be an adult.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: another 2800
« Reply #7 on: March 29, 2013, 08:41:40 am »
i was going to order one over the interweb, however it was going to cost more for the shipping than to get it localy. and the thing about this husky one, all i need to do is order the sheaves (6 bux each) and can take any and all gears off. i have 4 of them and haven't had a problem finding the right one to do the job.

Thats what I was wondering about that puller you had.

So you can put different worm gear pullers on the end?  Could you show more on this please and maybe part numbers etc if handy.
REDNECK Saw Repair Getter Done

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: another 2800
« Reply #8 on: March 29, 2013, 09:06:24 am »
the other ones look the same, just the pitch and diameter are different. they're all husqvarna numbers. for life of me i can't find the paper i had with the part numbers ::) i do that alot.
i'll keep looking, it has to show up. i gots some other "important" info on that notepad that i need
the one in the pic (of course) is for the 50,51 and 55. and as you see it fits others.
the biggest one i have is for the older huskies (L 65 etc.) and i think it will also fit the 1100-2100's, but haven't confirmed that personaly.
the smallest one is for the little 36-41 etc.
the first one i ordered was originaly for a 394 i was working on, but it came in as the wrong one and didin't fit. no idea what it's supposed to fit as i haven't ran across the chance to use it. same diameter as the 50-55 tool, just alot finer threads. no idea what the p.n.# is for that as it was a few years ago when i got it. you order the 'shiny silver' part seperatly, and just add the black parts.
when I grow up, i wanna be an adult.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: another 2800
« Reply #9 on: March 29, 2013, 09:20:06 am »
I have found my coarse 330 one to fit the coarse 490 worm gear.  I am wondering if your fine thread one fits the fine worm gear on 490 and 5000.

I'm interested in the part you are attaching the black worm gear pullers to? The silver part what is it any clue? I can find the black threaded part, just never seen the silver part they attach to.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
Poulan 505

Started by man of stihl « 1 2 ... 41 42 » Poulan

413 Replies
8405 Views
Last post August 23, 2020, 03:37:08 pm
by Cut4fun .
Poulan 475

Started by Cut4fun « 1 2 ... 35 36 » Poulan

351 Replies
9032 Views
Last post October 25, 2018, 02:04:51 pm
by Cut4fun .
222 Replies
6817 Views
Last post June 29, 2020, 07:46:24 pm
by Cut4fun .
44 Replies
1867 Views
Last post July 26, 2015, 05:45:30 pm
by Cut4fun .
4 Replies
550 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1233 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
31 Replies
1443 Views
Last post June 29, 2016, 08:15:33 pm
by countryhog
2 Replies
164 Views
Last post September 13, 2013, 02:57:45 pm
by KilliansRedLeo
2 Replies
232 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .
8 Replies
220 Views
Last post December 31, 2018, 09:04:53 am
by Cut4fun .