Author Topic: Poulan 2800  (Read 1193 times)

0 Members and 0 Guests are viewing this topic.

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: another 2800
« Reply #10 on: March 29, 2013, 09:45:53 am »
that's this part:
http://www.ebay.com/itm/TOOL-FLYWHEEL-PULLER-HUSQVARNA-CHAINSAW-154-181-242-254-/390155263361?pt=LH_DefaultDomain_0&hash=item5ad710dd81

you only use the screw for the small puller which is alot deeper than the others. my head is full of cobwebs this morning. the lady had to drive home last night ;) and it was ordered through a poulan shop.

of course, none of the ends have the part number on them >:(

you might be right about the fine thread one. and i remember you having a saw apart and asking about it. i never have had one of those down far enough to even notice the gear, never had to do the crankseals on one. but maybe, just maybe i'll get lucky enough to have one come through here someday. never have had a saw open to use it yet....
when I grow up, i wanna be an adult.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: another 2800
« Reply #11 on: March 29, 2013, 09:58:31 am »
So the black worm gear part threads onto that.  Thanks.

Just saving

HUSQVARNA FLYWHEEL PULLER 502700503 OR 502502601

REDNECK Saw Repair Getter Done

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: another 2800
« Reply #12 on: March 29, 2013, 10:12:08 am »
yes, and the small puller just uses the screw from that. :)
when I grow up, i wanna be an adult.

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: another 2800
« Reply #13 on: March 31, 2013, 08:40:07 am »
well! got the bottom end back together and now it's nice and smooth. not the box of gravel it was. :)
cleaned up the mounting surfaces for the cylinder and bolted it on to check the squish. aaaaaand she's a head tapper without a gasket. in all thee i'e been through, i have never had one do this. guess i don't have to take anything off the bottom of the cylinder ;) now to get me some thin gasket paper. of course, all the stores are closed totday and all the thinnest i have here is .035 :(
AIN'T NOBODY GOT TIME FO THAT! ;D
gots to go in to work to check on the machinery soon. so i'll see what i can come up with from there. :)
happy easter!
when I grow up, i wanna be an adult.

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: another 2800
« Reply #14 on: March 31, 2013, 01:36:12 pm »
well didn't have to go into work after all. so no looky looky for thinner gasket material :'(
after trying a piece of this .035 stuff i end up with about the same squish as stock :-[
now im going to have to wait until tomorrow fro the stores to open.
oh well. moar beeer 8) then turkey.
when I grow up, i wanna be an adult.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: another 2800
« Reply #15 on: March 31, 2013, 02:07:04 pm »
What about finding some paper .010" or whatever thickness you want?  CAA magazine cover or something? Cover from a old road atlas?

I've made some nice gaskets from the card stock that chainsaw parts are mounted on.

I particularly like the poly coated (slick) card stock.

I bought a roll of thin gasket material at the hardware store the other day and it didn't work out so well. It acted like it was felt and was fuzzy around the cuts.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: another 2800
« Reply #16 on: March 31, 2013, 02:21:54 pm »
oh i'm looking at different catalogs and magazines for the right thickness :D so far i've found stuff around the .011, ,030 and .035. :)
once i find something in the .025-.028ish relm, i'll brush some gasket maker sealant on it and let it sit for a few hours to soak it in.
i know we have the right stuff at work, it's even .028 and crushed thickness is supposed to be .024. i wish work was closer so i could just pop in and grab a small piece.
when I grow up, i wanna be an adult.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: another 2800
« Reply #17 on: March 31, 2013, 03:45:32 pm »
What about copper sheet or tin from beer and pop cans.
REDNECK Saw Repair Getter Done

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: another 2800
« Reply #18 on: March 31, 2013, 03:57:15 pm »
What about copper sheet or tin from beer and pop cans.

 i'm not alowed to play with sharp objects so i need someting i can chew into shape >:(
i think i found the perfect paper to use :) i found a small pack of plastic stick-on window screen repair. the paper is .023. i can crush it down to .018 if i push hard on the caliper's anvil. not a perfect test but it has been "accurate" for me in the past doing this. i'll throw it on and see what the squish is, then decide if i want to use it or not. :)
when I grow up, i wanna be an adult.

Offline Barneyrb

  • 4 cube
  • **
  • Posts: 26
  • Karma: 11
Re: another 2800
« Reply #19 on: March 31, 2013, 06:58:30 pm »
No, just make a pop-up on the piston and clearance is solved, that's the way I roll.............

 

Related Topics

  Subject / Started by Replies Last post
Poulan 505

Started by man of stihl « 1 2 ... 41 42 » Poulan

413 Replies
8405 Views
Last post August 23, 2020, 03:37:08 pm
by Cut4fun .
Poulan 475

Started by Cut4fun « 1 2 ... 35 36 » Poulan

351 Replies
9032 Views
Last post October 25, 2018, 02:04:51 pm
by Cut4fun .
222 Replies
6817 Views
Last post June 29, 2020, 07:46:24 pm
by Cut4fun .
44 Replies
1867 Views
Last post July 26, 2015, 05:45:30 pm
by Cut4fun .
4 Replies
550 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1233 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
31 Replies
1443 Views
Last post June 29, 2016, 08:15:33 pm
by countryhog
2 Replies
164 Views
Last post September 13, 2013, 02:57:45 pm
by KilliansRedLeo
2 Replies
232 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .
8 Replies
220 Views
Last post December 31, 2018, 09:04:53 am
by Cut4fun .