Chainsaw Repair

http://www.ereplacementparts.com/fuel-line-fitting-p-236335.html



This is the double barb fuel line fitting from a Poulan Micro series saw.  It can also be used in a vent application (I've done so), but that's not it's intended purpose.  It has 'equal length' barbs that are meant to have a fuel line on each end.  Doesn't have a short end for the duckbill and the longer end (with less pronounced barb ridges) for passing through the tank wall.  Works well enough though.  It's more expensive than the 'right' part, but is fine to use if that's all ya got.  I used one as I had a Micro parts saw laying around at the time...