Chainsaw Repair

Is the duck bill like whats on a homelite super2 type saws?  I have a craftsman 2.0 at home is that a micro?  The barb fitting says leaves are wharehouse in 5-10 days, I would roll thru the husky dealer, but I don't really want to take half the saw apart, probably what someone started to do that landed this thing as a parts saw to start with   I guess I am either going to have to swap tanks = take half the saw apart, 372 vent = take half of saw apart, or try & find that barb locally.  I'll have to look closer at the saw with the goo on the extra tygon coming out the tank, Kevins redneck type of repair!

The 530026119 duckbill valve is a current Poulan and Husqvarna part #, as that valve was (and still is) used on some Husqvarna machines.  Your dealer should stock it.  The double barb fitting they can order.  The Micro application fitting can also be ordered through them, and may be in stock as the Husqvarna 23 was a Poulan Micro in orange clothing as well.  Your Craftsman 2.0 is indeed a Micro series saw, and is basically a private label Poulan 2000.

You can use the Homelite 69451 duckbill (as used in many Homelite gas caps and also in the oil and fuel tanks of an XL2/Super2) here as well.  It may be too loose for the 'correct' double-barb fitting..............but is a good fit on the Micro double-barb fitting.  Those duckbills are still sold through Oregon and Stens dealers.


I just started a new thread here covering this tank vent retrofit.

http://chainsawrepair.createaforum.com/poulan/poulan-34503750-and-poulanpro-330380-tank-vent-retrofit/msg32351/#msg32351