Author Topic: Bar ID ?  (Read 771 times)

0 Members and 1 Guest are viewing this topic.

Offline deezlfan

  • 5 cube
  • ***
  • Posts: 117
  • Karma: 24
  • Location: Edge of Reality
Bar ID ?
« on: March 29, 2016, 07:46:42 pm »
I have a bar I suspect is for a Poulan. Only markings are 530-044338 followed by 1850 8879 GF Made in Canada.

18" long and has a replaceable .325 roller nose held on with one rivet. Appears to be .050. Oils through the studs.

Can any one confirm what it might have been mounted on?
We just drag them down..... Until they're just like us !!!  BNL

Share on Facebook Share on Twitter


Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4470
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Bar ID ?
« Reply #1 on: March 29, 2016, 10:10:45 pm »
A picture of the mounting area of the bar may help.   It could fit more than one model and make of saw out there.
PP 505, 475, 445.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Bar ID ?
« Reply #2 on: March 29, 2016, 10:36:14 pm »
Most Poulans are a variation of the Oregon 041 mount A K & T  with a 8.2mm slot

We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Bar ID ?
« Reply #3 on: March 29, 2016, 10:44:25 pm »
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Bar ID ?
« Reply #4 on: March 29, 2016, 10:47:07 pm »
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline deezlfan

  • 5 cube
  • ***
  • Posts: 117
  • Karma: 24
  • Location: Edge of Reality
Re: Bar ID ?
« Reply #5 on: March 30, 2016, 06:41:41 am »
Looks like the K041 profile.
We just drag them down..... Until they're just like us !!!  BNL

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22055
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Bar ID ?
« Reply #6 on: March 30, 2016, 12:57:40 pm »
I have a bar I suspect is for a Poulan. Only markings are 530-044338 followed by 1850 8879 GF Made in Canada.

18" long and has a replaceable .325 roller nose held on with one rivet. Appears to be .050. Oils through the studs.

Can any one confirm what it might have been mounted on?

WAG Probably came on a 3000 2700 2800 285 305 335 3300 being .325. 
REDNECK Saw Repair Getter Done

Offline deezlfan

  • 5 cube
  • ***
  • Posts: 117
  • Karma: 24
  • Location: Edge of Reality
Re: Bar ID ?
« Reply #7 on: March 30, 2016, 02:32:13 pm »
Thanks Guys. Just couldn't get a match on the part number.
We just drag them down..... Until they're just like us !!!  BNL