« previous next »
Pages: [1] 2 3 4 5 6 ... 8   Go Down

Author Topic: Craftsman Poulan 25 25D S25 S25D CVA Top Handle  (Read 5969 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 24221
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Craftsman Poulan 25 25D S25 S25D CVA Top Handle
« on: October 07, 2016, 07:48:43 pm »
Picked these 3 craftsman 38cc powersharp chainsaws today. The blue and red start, run and oil bar. The red one had rear and front handle AV.
Yellow one missing rope and handle so no clue there.

Will try and get these into someones hands that like these models.  Will sell or trade just PM me.



Logged

Share on Bluesky Share on Facebook

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 24221
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Blue Red Yellow 38cc Top Handles
« Reply #1 on: October 07, 2016, 09:27:01 pm »
The yellow and blue one have oil under the black button on handle. The red one had like a dummy button that is level and no words under it like the other 2.  Any info?

Not up on the info on these as I usually just fix or part them out.
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 24221
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Blue Red Yellow 38cc Top Handles
« Reply #2 on: October 07, 2016, 09:58:46 pm »
All 3 craftsman and always had auto with manual oiler too. All my poulans in past too. But this Red one is the only one I have seen like this with a dummy button. Maybe newer version.

Few of them have that black plastic on/off switch too.

blue yellow have the manual button and black plastic switch. Red one with AV has the metal on/off and dummy button.
 
Logged

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4709
  • Karma: 320
  • Location: Carpenter, Wyoming
Re: Blue Red Yellow 38cc Top Handles
« Reply #3 on: October 07, 2016, 10:48:46 pm »
That is pretty neat to find 3 different colors like that.
Logged
PP 505, 475, 445.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Blue Red Yellow 38cc Top Handles
« Reply #4 on: October 08, 2016, 08:16:15 am »
Though all three saws are Sears 38cc powersharps, as you can tell by the previous posts, they now have regular chains and there are other subtle differences besides color for they are apparently different ages?
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 24221
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Blue Red Yellow 38cc Top Handles
« Reply #5 on: October 08, 2016, 08:19:36 am »
Think 2 had like cast iron looking mufflers. Thick metal.

Will get each ones pics when I unload the truck today. I just pulled it in last night.
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 24221
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Blue Red Yellow 38cc Top Handles
« Reply #6 on: October 09, 2016, 01:58:26 pm »
Looking to take rear handle saws in trade for these.  Saws that a homeowner type would use for trimming or firewood cutting.
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 24221
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Blue Red Yellow 38cc Top Handles
« Reply #7 on: October 09, 2016, 04:14:46 pm »
Yellow craftsman was eating at me wondering if runner. Put a recoil rope in, pulley fastener, handle etc from the green parts saw.  Piston looked good looking at it through back half of muffler. She lives, runs and oils.

red one wear 3/8lp 7 rim and the blue and yellowing wearing 1/4 9 rims

resizing pics
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 24221
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Blue Red Yellow 38cc Top Handles
« Reply #8 on: October 09, 2016, 04:41:25 pm »
all 3 runners.  8)

pics
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 24221
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Blue Red Yellow 38cc Top Handles
« Reply #9 on: October 10, 2016, 01:59:56 pm »
I get caught up. I thought I will take the red 2.3 38cc and the newer micro 2.3 cva and compare them in a pine cant.

Red is wearing 3/8 7T rim and I think the 2300cva has a 6T spur.  I have a 6T spur for the red one from a green saw But I aint going to switch them just for testing. Even though I know I should to keep it all even. But IMO the older ones are alot stronger in the cuts anyways.
Though I still like the newer micros for ease of parts etc.

I might even sharpen 1 of the 1/4" chains and run it on the yellow and blue ones with 9T 1/4 rims.

poulan s25da s 25av IPL http://www.klippo.com/ddoc/POUI/POUI1995_USen/POUI1995_USen__530067624.pdf
Logged
Pages: [1] 2 3 4 5 6 ... 8   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
1 Replies
1927 Views 		Last post October 18, 2012, 04:02:23 pm
by Cut4fun .
26 Replies
2985 Views 		Last post March 05, 2013, 06:49:29 pm
by 3000 FPS
18 Replies
2551 Views 		Last post January 25, 2014, 08:03:36 am
by The Ripper
5 Replies
877 Views 		Last post September 21, 2014, 09:58:50 am
by stubnail67
4 Replies
1336 Views 		Last post January 04, 2015, 11:28:15 am
by Philbert
9 Replies
1640 Views 		Last post February 04, 2015, 12:37:31 pm
by Cut4fun .
1 Replies
1165 Views 		Last post February 09, 2017, 12:26:19 pm
by Cut4fun .
1 Replies
720 Views 		Last post January 15, 2017, 03:44:55 pm
by Cut4fun .
2 Replies
652 Views 		Last post November 11, 2017, 02:42:19 pm
by farmboy
0 Replies
620 Views 		Last post June 28, 2024, 03:25:25 pm
by Cut4fun .