Author Topic: Craftsman Poulan 25 25D S25 S25D CVA Top Handle  (Read 893 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Blue Red Yellow 38cc Top Handles
« Reply #40 on: November 08, 2016, 02:55:39 pm »
The 2.3ci saws have bore that's a hair over 38mm.  Around 1.5".  Don't have the exact number in front of me right now.


I found it in another thread here. Thanks. The one with pics of the rings etc.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Blue Red Yellow 38cc Top Handles
« Reply #41 on: December 01, 2016, 03:05:20 pm »
Look at the back of the yellow one and blue one on my 2 posted first. Why the difference in the rear handles? Just noticed that.








Also just looked at this 2.1 that had the rear handle like the blue one.

REDNECK Saw Repair Getter Done

Offline AmericanPsycho

  • 6 cube
  • ****
  • Posts: 177
  • Karma: 5
  • Kendallville's Resident Chainsaw Maniac
  • Location: Redneckville, IN
Re: Blue Red Yellow 38cc Top Handles
« Reply #42 on: December 02, 2016, 04:34:24 am »
Just seen this thread. "Oil" isn't on the handle behind the button of my blue S25 CVA either. The button does stick up proud and oils when it's depressed.
From darkness to light and back again.
Like Like x 1 View List

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Blue Red Yellow 38cc Top Handles
« Reply #43 on: December 06, 2016, 02:19:17 pm »
None of the CVA handles seem to have "Oil" cast in behind the button.  It's on the rigid handles though.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.
Useful Useful x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Blue Red Yellow 38cc Top Handles
« Reply #44 on: December 19, 2016, 09:06:43 am »
Gary has a good pic of the green cva with word OIL missing.

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Blue Red Yellow 38cc Top Handles
« Reply #45 on: December 19, 2016, 09:08:57 am »
Looking at that pic. Notice the red or orange under the green on the worn rear handle part.
REDNECK Saw Repair Getter Done

Offline AmericanPsycho

  • 6 cube
  • ****
  • Posts: 177
  • Karma: 5
  • Kendallville's Resident Chainsaw Maniac
  • Location: Redneckville, IN
Re: Blue Red Yellow 38cc Top Handles
« Reply #46 on: December 19, 2016, 09:40:06 am »
That orange could be primer.
From darkness to light and back again.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Blue Red Yellow 38cc Top Handles
« Reply #47 on: December 19, 2016, 11:14:44 am »
They been known to paint over parts. I was thinking the red craftsman or this orange one.

I have this in route to me. Wizard 316 AV I dont even know why I keep getting them. I just set them on the shelf after checking over.



REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Blue Red Yellow 38cc Top Handles
« Reply #48 on: December 19, 2016, 06:03:53 pm »
Very cool.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4464
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Blue Red Yellow 38cc Top Handles
« Reply #49 on: December 19, 2016, 08:21:43 pm »
Wizard.  That is pretty cool.
PP 505, 475, 445.
Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
334 Views
Last post October 18, 2012, 04:02:23 pm
by Cut4fun .
26 Replies
824 Views
Last post March 05, 2013, 06:49:29 pm
by 3000 FPS
18 Replies
420 Views
Last post January 25, 2014, 08:03:36 am
by The Ripper
5 Replies
136 Views
Last post September 21, 2014, 09:58:50 am
by stubnail67
4 Replies
334 Views
Last post January 04, 2015, 11:28:15 am
by Philbert
9 Replies
190 Views
Last post February 04, 2015, 12:37:31 pm
by Cut4fun .
1 Replies
103 Views
Last post February 09, 2017, 12:26:19 pm
by Cut4fun .
16 Replies
331 Views
Last post August 22, 2016, 09:33:38 pm
by 3000 FPS
1 Replies
114 Views
Last post January 15, 2017, 03:44:55 pm
by Cut4fun .
2 Replies
69 Views
Last post November 11, 2017, 02:42:19 pm
by farmboy