Author Topic: Please help:PP 260 Fuel tank troubles.  (Read 863 times)

0 Members and 0 Guests are viewing this topic.

Offline Jason K

  • 6 cube
  • ****
  • Posts: 190
  • Karma: 7
  • Location: Iowa
Re: Please help:PP 260 Fuel tank troubles.
« Reply #20 on: April 27, 2014, 05:33:35 pm »
cut4fun_ On that used tank you have go head and try to add up the money you want with shipping . and PM me... Then I will give you my paypal email mail addy. So you can send a bill to it. I get paid this comming Thursday night.


Thanks
Jason


PS: Thanks for bailing me out on this.Like I said before it is a sweet running saw.A good starter for my son to use with me when cutting wood..

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4084
  • Karma: 165
  • OHIO REDNECK
Re: Please help:PP 260 Fuel tank troubles.
« Reply #21 on: April 27, 2014, 06:56:35 pm »
I tried that size too at first. It still leaked some on the primer hole.Plus I just put a new carb on it the old one was junk.And the line I have now fit on there nicely(carb and primer).


Which size line and which one you calling the primer hole?

When I installed the line  in the primer hole it was tighter then a skeeter's butt in a nose dive.  ;D
REDNECK Saw Repair

Offline Jason K

  • 6 cube
  • ****
  • Posts: 190
  • Karma: 7
  • Location: Iowa
Re: Please help:PP 260 Fuel tank troubles.
« Reply #22 on: April 27, 2014, 07:57:30 pm »
It's the closest one to the block in the bottom. I tried every size I can think of that fit tight on the carb.I Just want to back to oem size. I could rig his neck for drilling out both holes in the tank.  The primer hole leaks the wrost of both.just runs out when fueling or on it side. the fuel side on the carb it dips fast. So cut4fun_ that used tank I am going for it. Need it going with in the next 2 weeks. I just gave up on playing with fuel lines ..lol..



Jason

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4084
  • Karma: 165
  • OHIO REDNECK
Re: Please help:PP 260 Fuel tank troubles.
« Reply #23 on: April 27, 2014, 08:22:27 pm »
PM sent and will get it ready to mail to you by Sat. Is this OK with you.

You will only need to clean and install the small fuel line for fuel filter etc.
REDNECK Saw Repair

Offline Jason K

  • 6 cube
  • ****
  • Posts: 190
  • Karma: 7
  • Location: Iowa
Re: Please help:PP 260 Fuel tank troubles.
« Reply #24 on: April 27, 2014, 08:48:56 pm »
Sounds good. You have been a big help on this. What size of fuel line do I need for it tank to carb.
Thank you

Offline fordfairlane78

  • 6 cube
  • ****
  • Posts: 160
  • Karma: 16
  • Location: Valley Center,KS
Re: Please help:PP 260 Fuel tank troubles.
« Reply #25 on: April 28, 2014, 01:28:45 am »
.080" x .140" always works for me on these and most similar poulans.
Trapped in time, surrounded by evil, low on gas

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22015
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Please help:PP 260 Fuel tank troubles.
« Reply #26 on: April 28, 2014, 01:23:24 pm »
Sounds good. You have been a big help on this. What size of fuel line do I need for it tank to carb.
Thank you
.080" x .140" always works for me on these and most similar poulans.

We have a winner.  I thought self why not go to the blasted IPL and look up the small fuel line. Then search the part number to see the correct OEM size.   

530069247    =    .140" (3.56mm) OD X .080" (2.03mm) POULAN OEM 530069247 FUEL LINE

I must be out of that one because I know I used it in the past.
REDNECK Saw Repair Getter Done

Offline Jason K

  • 6 cube
  • ****
  • Posts: 190
  • Karma: 7
  • Location: Iowa
Re: Please help:PP 260 Fuel tank troubles.
« Reply #27 on: May 12, 2014, 08:19:33 pm »
I got the tank from cut4fun last week. Put it all together yesterday does not leak what so ever now. Thanks for all the replies from everyone.

Jason

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22015
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Please help:PP 260 Fuel tank troubles.
« Reply #28 on: May 12, 2014, 08:27:43 pm »
Very Cool.

Good work on the changing everything over too.
REDNECK Saw Repair Getter Done

Offline Jason K

  • 6 cube
  • ****
  • Posts: 190
  • Karma: 7
  • Location: Iowa
Re: Please help:PP 260 Fuel tank troubles.
« Reply #29 on: May 14, 2014, 11:33:15 pm »
Thank you

 

Related Topics

  Subject / Started by Replies Last post
7 Replies
2163 Views
Last post April 23, 2013, 04:21:14 pm
by Go JayBee
40 Replies
697 Views
Last post January 30, 2014, 10:44:24 am
by 660magnum
0 Replies
288 Views
Last post March 27, 2014, 12:28:36 pm
by farmboy
5 Replies
411 Views
Last post December 29, 2014, 05:23:09 pm
by ed 46
6 Replies
156 Views
Last post November 10, 2015, 09:15:40 pm
by acornhill
1 Replies
104 Views
Last post February 09, 2017, 12:26:19 pm
by Cut4fun .
4 Replies
316 Views
Last post September 22, 2016, 07:36:10 pm
by mowertech
0 Replies
225 Views
Last post November 05, 2016, 05:11:07 pm
by blueflame
0 Replies
185 Views
Last post February 04, 2017, 10:29:55 am
by mowertech
5 Replies
137 Views
Last post April 08, 2018, 10:13:28 am
by jcsmith