Author Topic: Craftsman 3.7 x2 Craftsman 2.3 (Read 73 times)

Cut4fun . · « **on:** June 12, 2021, 12:05:44 pm »

Hoping the 2 3.7 are thin ring 3700 tops. But chance they could be thick ring 3800. Time will tell.

Little guy 2.3 with that sharpening deal on cover. Heck one of the 3.7 too.

Bought all as non runners that had been stored. Suppose to ran when put up. 🤷🏼‍♂️

Anyone need this older stihl bar for a collector saw?

Cut4fun . · « **Reply #1 on:** June 13, 2021, 06:59:32 am »

1st 3.7 done and running. It's a thick ring 3800.

Cut4fun . · « **Reply #2 on:** June 14, 2021, 06:41:56 am »

Started in other one for a bit before family arrived. This red 3.7 is thin ring. So still about 50/50 on these for me in red.

But noticed something that might be a tell and we are checking it on CRG.

Cut4fun . · « **Reply #3 on:** June 14, 2021, 07:29:18 am »

Havent seen one break like that before.

You could tell pulley was wobbly in there. Now I know why.

Cut4fun · « **Reply #4 on:** June 15, 2021, 09:55:12 am »

Well since I needed a shell for recoil on the thin ring one above. Whats another 3.7 to the parts stash. Just bought whole saw instead of just a recoil. 😂

Owner says starts on prime but needs fuel lines, carb kit, air filter.

Cut4fun . · « **Reply #5 on:** June 18, 2021, 07:45:49 am »

#3

Was going to buy a recoil shell for the one 3.7. But why buy a recoil when you can just buy a whole 3.7 thin ring saw being sold as non runner unless fed prime.
Was worried a little when I seen the box from USPS. 🤞🤞.

Cut4fun . · « **Reply #6 on:** June 19, 2021, 01:41:43 pm »

Breaking that parts saw down today.

PM needs. I just needed the recoil shell.

In for sale section more pics.

Chainsaw Repair

News:

Author Topic: Craftsman 3.7 x2 Craftsman 2.3 (Read 73 times)

Cut4fun .

Craftsman 3.7 x2 Craftsman 2.3

Cut4fun .

Re: Craftsman 3.7 x2 Craftsman 2.3

Cut4fun .

Re: Craftsman 3.7 x2 Craftsman 2.3

Cut4fun .

Re: Craftsman 3.7 x2 Craftsman 2.3

Cut4fun

Re: Craftsman 3.7 x2 Craftsman 2.3

Cut4fun .

Re: Craftsman 3.7 x2 Craftsman 2.3

Cut4fun .

Re: Craftsman 3.7 x2 Craftsman 2.3

Related Topics