Author Topic: Craftsman 358.350201 46cc 20"  (Read 537 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21869
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Craftsman 358.350201 46cc 20"
« on: March 16, 2017, 03:14:02 pm »
Craftsman 358.350201 358350201 46cc 20" dark green


Guy at work was given this and ask me to fix. Dropped off today. He couldnt get it to start for him.
Poulan craftsman 46cc like a 295 4620.
Seems like a muffler deflector might be missing. Ya think.   :P
REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter

Funny Funny x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21869
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman 358.350201 46cc 20"
« Reply #1 on: March 16, 2017, 04:52:13 pm »
Saving info.

4 chains only 3 go with saw to sharpen.
clutch cover with hand brake set up.
fuel line and fuel filter.
muffler shield deflector.
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Craftsman 358.350201 46cc 20"
« Reply #2 on: March 17, 2017, 05:06:14 am »
Kevin does that green 358.350201 Craftsman/Poulan saw have a chromed bore and bare piston, or a bare bore and a chromed piston?  I've seen both types among the various red, grey, green, and black Craftsman variants in this series.  I'm starting to compile an index of the Craftsman #'s for each type (bare bore or chromed bore).
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.
Useful Useful x 1 View List

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4458
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Craftsman 358.350201 46cc 20"
« Reply #3 on: March 17, 2017, 10:47:46 am »
That one c-racked me up.    Let me see what is that funny smell.    Oh must be the fuel.
PP 505, 475, 445.
Funny Funny x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21869
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman 358.350201 46cc 20"
« Reply #4 on: March 17, 2017, 10:58:49 am »
Kevin does that green 358.350201 Craftsman/Poulan saw have a chromed bore and bare piston, or a bare bore and a chromed piston?  I've seen both types among the various red, grey, green, and black Craftsman variants in this series.  I'm starting to compile an index of the Craftsman #'s for each type (bare bore or chromed bore).

Will check.  I looked at piston and bore but was only checking for scoring and didnt pay attention.
REDNECK Saw Repair Getter Done

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4038
  • Karma: 159
  • OHIO REDNECK
Re: Craftsman 358.350201 46cc 20"
« Reply #5 on: March 17, 2017, 12:54:48 pm »
Just looking for a new or used big dang deflector shield for this.
So far only muffler kits.

Muffler kit 530071495 $12.50 plus shipping

Pic upside down

REDNECK Saw Repair

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4038
  • Karma: 159
  • OHIO REDNECK
Re: Craftsman 358.350201 46cc 20"
« Reply #6 on: March 17, 2017, 01:00:00 pm »
craftsman 2.8  IPL http://www.searspartsdirect.com/model-number/358350201/0247/1503220.html


Found it listed on the sears site. 

Chainsaw muffler backplate 530055765  $ 4.39 plus shipping

#17



This part is compatible with the following machines:

    Poulan 2775 (Type 3) - Poulan Chainsaw - Engine Assembly Type 3
    Poulan 2775 (Type 4) - Poulan Chainsaw - Engine Assembly Type 4
    Poulan 2900 (Type 3) - Poulan Chainsaw - Engine Assembly - Type 3
    Poulan 2900 (Type 4) - Poulan Chainsaw - Engine Assembly - Type 4
    Poulan PP295 (Type 3) - Poulan Pro Chainsaw - Engine Assembly Type 3
    Poulan PP295 (Type 4) - Poulan Pro Chainsaw - Engine Assembly Type 4
    Poulan PP4620AV - Poulan Pro Chainsaw - Engine Assembly
    Poulan PP4620AVHD - Poulan Pro Chainsaw - Engine Assembly
    Poulan PP4620AVL - Poulan Pro Chainsaw - Engine Assembly
    Poulan PP4620AVX (952802169) - Poulan Pro Chainsaw (2012-01) - ENGINE
    Poulan PP4620AVX - Poulan Pro Chainsaw - Engine Assembly

Craftsman
358350240 Chainsaw
358.350203 Chainsaw
358348231 Chainsaw
944411461 Chainsaw
358350210 Chainsaw
944414460 Chainsaw
358348232 Chainsaw
944411462 Gas Chainsaw
358350202 Chainsaw
358348230 Chainsaw
358350201 Chainsaw
358350203 Chainsaw





REDNECK Saw Repair

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4038
  • Karma: 159
  • OHIO REDNECK
Re: Craftsman 358.350201 46cc 20"
« Reply #7 on: March 17, 2017, 01:06:01 pm »

REDNECK Saw Repair

Offline old 040

  • 4 cube
  • **
  • Posts: 67
  • Karma: 16
Re: Craftsman 358.350201 46cc 20"
« Reply #8 on: March 19, 2017, 06:04:13 am »
I picked up a clean earlier Sears variant off C-list a few months back, still in very nice original condition, I think it's a type I or maybe type 2, it really does run well for what it is and will see action on occasion, I think the earlier mufflers are less choked up than the later versions, sellers pics, it's been cleaned up since..... ;D
Agree Agree x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21869
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman 358.350201 46cc 20"
« Reply #9 on: March 19, 2017, 09:30:57 am »
Agree on the mufflers. Wish this one had the black 2 piece early one.  old 040 I would bet yours shown would have a chrome bore?  Any info?

Aaron,  this one I have here is Bare bore, Chrome piston


Had to order a muffler kit to get the oem deflector. Deflector new is nla. Couldn't find a used one by itself.
If it were mine I would have closed off the rear exit and opened up front and or side for exit
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
466 Views
Last post May 25, 2012, 05:43:04 pm
by Cut4fun .
5 Replies
547 Views
Last post December 31, 2012, 12:55:16 pm
by Chris J.
33 Replies
1816 Views
Last post August 30, 2014, 01:40:43 pm
by 660magnum
6 Replies
254 Views
Last post November 08, 2014, 09:59:01 pm
by Cut4fun .
13 Replies
395 Views
Last post March 26, 2017, 03:06:09 pm
by Revpop
7 Replies
445 Views
Last post September 11, 2015, 03:44:31 pm
by Cut4fun .
15 Replies
600 Views
Last post September 09, 2015, 10:06:43 pm
by Eccentric
10 Replies
309 Views
Last post April 27, 2016, 02:22:24 pm
by deezlfan
4 Replies
238 Views
Last post October 14, 2016, 12:25:30 pm
by Cut4fun .
2 Replies
746 Views
Last post March 19, 2018, 12:12:49 pm
by deezlfan