Author Topic: Craftsman 2.3 like a Poulan 2300cva  (Read 1900 times)

0 Members and 0 Guests are viewing this topic.

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 178
  • Karma: 23
Re: Craftsman like a 2300cva
« Reply #30 on: July 19, 2014, 08:15:18 pm »
will do i paid way more for that one then i normally do....took a year to find one in the shape i wanted.......i have a few micros 2.3 micros beaters parts saws  that i made into running saws..... i think i love them best .... i have alot of buddies that climb are like what is that thing????man ill take one of those.....that thing cuts really good.....oh it does not have a chain brake?????? I usually reply cause a real man dont need one LOL......love my beater saws.....i do clean them and maintain them......sharpen them ....etc..... will let you know if i decide to part with the 23 compact....there is one on the bay right now pretty low in not bad shape unless its sold

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 178
  • Karma: 23
Re: Craftsman like a 2300cva
« Reply #31 on: July 19, 2014, 08:16:49 pm »
am i allowed to post the link here?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman like a 2300cva
« Reply #32 on: July 19, 2014, 08:34:58 pm »
am i allowed to post the link here?


Post up this site isnt like that. We are ALL SPONSORS  here for FREE.   ;)

Not about money here. It's about helping folks out and learning.
REDNECK Saw Repair Getter Done

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 178
  • Karma: 23
Re: Craftsman like a 2300cva
« Reply #33 on: July 19, 2014, 08:35:41 pm »
i love my lil echos i have 2 in case one goes down..... i have muffler modded them and they cut good enuff for me.... light and always starts.....keep the chain sharp its good..... seems like they struggle over 10 inch wood if im trying to cut fast..... im older now i just let the saw do the work,,,,,, better to take your time......cant remember witch pole saw it is off hand its been a good tool......the shaft is stiffer them my buddys stihl.....

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 178
  • Karma: 23

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman like a 2300cva
« Reply #35 on: July 19, 2014, 08:45:06 pm »
Nice 23 in that ad.

Here is a 2300cva handle with everything. Being you was asking about mine.  AV's look good too.  $5 and ship. http://www.ebay.com/itm/Poulan-2300-Chainsaw-Top-Trigger-Handle-Assembly-/171371719703?pt=LH_DefaultDomain_0&hash=item27e68cec17
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman like a 2300cva
« Reply #36 on: July 19, 2014, 08:51:04 pm »
Stubnail, remember you asking about 2400. Here is the craftsman 2.3 $75 shipped.  http://www.ebay.com/itm/Craftsman-2-3-Chainsaw-runs-great-AR-549-/230990241003?pt=LH_DefaultDomain_0&hash=item35c8175ceb
REDNECK Saw Repair Getter Done

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 178
  • Karma: 23
Re: Craftsman like a 2300cva
« Reply #37 on: July 19, 2014, 09:10:34 pm »
I saw that one yes...... right now my goals are a 235pp a 2.3 grey with the handle like you have and a poulan 2400 and a poulan 236 in mint shape........i need to go through my herd and get rid of some duplicates i have ..... i had 20 different micros and sold them all then kicked my self a few were mint hard to find xxv micros .....and a really good pp225 with such good compression.....i was new to them and did not know about the check valve i sold it cheap for parts,,,,,,breaks my heart it was a strong saw.........i know these saws pretty well now and have built it back up......my wife thinks i am more crazy then ever LOL.......

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman like a 2300cva
« Reply #38 on: July 19, 2014, 10:14:29 pm »
You can have the 2.3 grey I got in for the trade in I allowed PHO. Shipping would probably be more.

Would come with the old carb needing a kit as far as I can tell. Diaphragms are stiff. Missing the presence lever in the handle. on/off switch dont work and never checked it.  Someone  put washers between bolt and outer av's. The old fuel line I trimmed up to test and good fuel filter still in it. Muffler was pried on and bent, plus on backwards. I put back up without baffles and screen.
REDNECK Saw Repair Getter Done

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 178
  • Karma: 23
Re: Craftsman like a 2300cva
« Reply #39 on: July 19, 2014, 11:04:17 pm »
like i said im tight right now but email what you would want shipped to florida 33709..... and i will work on it.....i have good carbs bar and chain combos plenty of parts except that style handle .......oilers even a donor grey 2000 worse case...... long as the handle is not broke i should have everything to make it ....... may take me a week to sell these saws ..... i am at an all time low on money ....im not used to this...... but i am interested.....in that saw..... let me know a total price shipped....i can rebuild the carb and what ever else it needs.... 

 

Related Topics

  Subject / Started by Replies Last post
3 Replies
483 Views
Last post February 08, 2012, 04:16:23 pm
by Cut4fun .
6 Replies
233 Views
Last post May 01, 2013, 03:19:29 pm
by Cut4fun .
18 Replies
418 Views
Last post January 25, 2014, 08:03:36 am
by The Ripper
4 Replies
333 Views
Last post January 04, 2015, 11:28:15 am
by Philbert
9 Replies
189 Views
Last post February 04, 2015, 12:37:31 pm
by Cut4fun .
2300CVA

Started by leec « 1 2 » Poulan

17 Replies
338 Views
Last post September 24, 2015, 03:47:45 pm
by Eccentric
6 Replies
630 Views
Last post July 16, 2016, 08:34:33 pm
by TedB.
16 Replies
330 Views
Last post August 22, 2016, 09:33:38 pm
by 3000 FPS
2 Replies
68 Views
Last post November 11, 2017, 02:42:19 pm
by farmboy
0 Replies
46 Views
Last post November 24, 2017, 07:45:51 pm
by AmericanPsycho