Author Topic: quad port poulan 445 425 415  (Read 607 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21870
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
quad port poulan 445 425 415
« on: March 20, 2014, 03:32:36 pm »
Someone has finally bought the poulan pro 445 topend for $90 I have been watching for better of 10 months.   

You dont know how many times I had it in my parts list to buy and delete it before parts purchase.  Just didnt want it setting on my shelf unused forever.

REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4458
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: finally phew pp445 p+c
« Reply #1 on: March 21, 2014, 12:29:48 am »
I would not imagine those would come up very often for sale.   
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21870
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: finally phew pp445 p+c
« Reply #2 on: March 21, 2014, 06:45:54 am »
I would not imagine those would come up very often for sale.   

Trust me it was always in the back of my mind.

 If mine wasnt like new topend or didnt have one I would have snagged it from the get go. 

Only seen 4 complete saws of  the PP445  now and this top end and parts. So 5 sort of.
REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: finally phew pp445 p+c
« Reply #3 on: March 22, 2014, 11:12:27 am »
I see it is a Gilardoni - what kind of transfers does it have?

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4038
  • Karma: 159
  • OHIO REDNECK
Re: finally phew pp445 p+c
« Reply #4 on: March 22, 2014, 11:18:19 am »
I see it is a Gilardoni - what kind of transfers does it have?

Quads and already opened at bottom like guys do when opening up 372 cylinder.
REDNECK Saw Repair

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4038
  • Karma: 159
  • OHIO REDNECK
Re: finally phew pp445 p+c
« Reply #5 on: March 22, 2014, 11:20:12 am »
Niko on RIGHT



REDNECK Saw Repair

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: finally phew pp445 p+c
« Reply #6 on: March 22, 2014, 05:11:41 pm »
I see it is a Gilardoni - what kind of transfers does it have?

Quads and already opened at bottom like guys do when opening up 372 cylinder.

Nice, but that's what I expected - so I assume that the power is quite close to the 76.5cc top ends of the 7700, 2077 and 475?

The transfers looks a bit narrow though, so I don't really know...

In case someone doesn't know, the PP445 is the same saw as the Partner P710, and 70.7cc.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4038
  • Karma: 159
  • OHIO REDNECK
Re: finally phew pp445 p+c
« Reply #7 on: March 22, 2014, 05:31:19 pm »
I like the 445 70.7cc better then my 475 77cc  505 82.5cc if given the choice of a saw to pick. This is JMO.
REDNECK Saw Repair

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: finally phew pp445 p+c
« Reply #8 on: March 22, 2014, 06:56:49 pm »
I don't find that odd at all!   ;)


...but this thread really should be in the Partner forum as well as here, as that was the original brand..... ;D


....and remember that all those saws were made at the Husky factory in Sweden, but there was no orange version of any of the models.

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4458
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: finally phew pp445 p+c
« Reply #9 on: March 22, 2014, 09:02:42 pm »
I don't find that odd at all!   ;)


...but this thread really should be in the Partner forum as well as here, as that was the original brand..... ;D


....and remember that all those saws were made at the Husky factory in Sweden, but there was no orange version of any of the models.

That is an interesting point that they made some of these models in Poulan and Jonsered but not in Husqvarna.
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
17 Replies
2732 Views
Last post June 09, 2011, 07:44:08 am
by 05_sprcrw
9 Replies
553 Views
Last post January 31, 2012, 09:28:50 pm
by Al Smith
100 Replies
1745 Views
Last post February 24, 2013, 12:54:05 pm
by jmester
8 Replies
512 Views
Last post April 17, 2013, 07:51:59 pm
by Al Smith
4 Replies
278 Views
Last post July 02, 2013, 09:47:32 pm
by farmboy
8 Replies
380 Views
Last post November 14, 2013, 12:31:50 am
by 3000 FPS
15 Replies
720 Views
Last post July 11, 2014, 11:12:16 pm
by DexterDay
0 Replies
454 Views
Last post April 07, 2016, 01:41:04 pm
by Cut4fun .
4 Replies
258 Views
Last post April 18, 2018, 01:10:06 am
by 660magnum
3 Replies
22 Views
Last post June 28, 2020, 07:36:32 am
by Cut4fun