Chainsaw Repair

Quote from: Turbosl2 on October 28, 2020, 09:25:44 am

Quote from: Cut4fun . on October 28, 2020, 07:59:09 am

3750 shouldnt have 2 line coming from the tank.  The older poulans did like 3300 etc before switching to the tank vent on upper left side on 3750 etc.
Someone might have added a tank vent there and plugged off the side one?  Some folks do that.

3750 didn't have primer bulbs either. That was a later plastic poulans thing.

Thanks for continuing to help on this. Here is a forum of my exact saw on this forum (60cc 24" Craftsman). I thought it was a 3750 Poulan equivalent but maybe its a red headed step child 3500??

http://chainsawrepair.createaforum.com/poulan/craftsman-3-7-60cc-24'/

I will be out to look at the saw this morning and will post my own pics

There the reason you have 2 lines out of tank. 1 fuel line and other tank vent.  The impulse line in BLACK in the pic above will be the one to check to back of crankcase to top of carb.  The 2 yellow ones are tank vent and fuel line.

Thats cool and the rarer of the 60cc 3500 365 3.7

Still 60cc but earlier then 3750. Also they didnt come with a 164 carb. They came with a 49 carb.  So look for carb numbers on side of your carb.  Because I have and others have put bigger intakes and the bigger carbs on saws like these in past.

Great this helps. I found the duckbill sitting in the tank just now, seems to all make sense now. Havent been able to located the impulse port but i will keep looking. Very tight space to see anything. The 2nd saw in that pic is the same saw i have.