Author Topic: Poulan 2000 etc.  (Read 134 times)

0 Members and 0 Guests are viewing this topic.

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Poulan 2000 etc.
« on: June 05, 2015, 02:30:59 pm »
Here is a good idea for making these saws easier to start.  Primer bulb hadn't thought about it. 
http://www.ebay.com/itm/CRAFTSMAN-2-0-POULAN-2000AV-CHAINSAW-16-33CC-STRONG-RUNNER-MODIFIED-W-PRIMER-/141685178743?pt=LH_DefaultDomain_0&hash=item20fd184177
Shep

Share on Facebook Share on Twitter


Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Poulan 2000 etc.
« Reply #1 on: June 05, 2015, 03:02:40 pm »
No thanks.  I don't like purge bulbs.  Just pull the rope a few more times.  It's a 33cc saw........................ain't like pulling over a 288XP or 2100CD without a comp release.

I've never had a problem with the Micro series.  Only have to pull a bunch of times if the saw has been run dry or has been sitting for a long time. 

If the carb diaphragms/gaskets and/or crank seals are tired (which the often are on 30 year old saws) then they can take more pulls to pump fuel from the tank....
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline old guy

  • 4 cube
  • **
  • Posts: 49
  • Karma: 12
Re: Poulan 2000 etc.
« Reply #2 on: June 05, 2015, 04:38:23 pm »
I have to disagree with Eccentric, I just rebuilt a saw that has a purge bulb  and it was running with 4 pulls instead of 13 pulls for the last one without a bulb.
  I know, sooner or later they will give trouble, but I like em.

  John

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21944
  • Karma: 531
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 2000 etc.
« Reply #3 on: June 05, 2015, 04:55:57 pm »
Just saving ebay pic.

I prefer no primer bulbs too. I actually disable some saws with them.



REDNECK Saw Repair Getter Done

Offline dannyupsolate

  • Piped Saw
  • *****
  • Posts: 328
  • Karma: 28
Re: Poulan 2000 etc.
« Reply #4 on: June 06, 2015, 09:48:52 am »
I wonder if it really helps or is just a sales gimmick and which carburetor he changed to. Some folks have bad shoulder and like easy start.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4464
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan 2000 etc.
« Reply #5 on: June 06, 2015, 04:48:23 pm »
I just prime my 2000 thru the carb if it has been sitting a long time.   I don't have to pull it 20 times that way to get it to run.
PP 505, 475, 445.

Online countryhog

  • 6 cube
  • ****
  • Posts: 176
  • Karma: 15
  • Location: NW arkansas
Re: Poulan 2000 etc.
« Reply #6 on: June 08, 2015, 07:55:55 am »
i'm guessing folks with bad shoulders may like this. me, I don't have the need. mine always start within 5 - 10 pulls after sitting. no big deal. I've got exactly two saws with bulbs; I don't use em
now is never here but the past is always present.
semper fi ya'll

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 179
  • Karma: 23
Re: Poulan 2000 etc.
« Reply #7 on: June 11, 2015, 10:52:33 pm »
the seller is jrp he is a pretty smart guy ... but i dont think i would want a primer there... also i would really like to see a pick of the routing in the air box.... i mean are the fuel lines over the filter?I clean my filters alot.... did he route them out of the way? i may email him and ask.....as he is a pretty good seller to deal with and a nice guy with info.....i also prime my saws if they sit a long time....
 he may have went to a carb that he replaced with a new style carb???? i saw a few he did like this.... would really like a pic of inside under the air filter cover.....

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Poulan 2000 etc.
« Reply #8 on: June 11, 2015, 11:48:52 pm »
Anymore, most newer purge bulb setups are single line and act somewhat as a primer. On the outside of the case they look just like the double line setups but inside the case there is just a single line from the metering chamber of the carburetor to the bulb. There's no return line to the top of the tank.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

 

Related Topics

  Subject / Started by Replies Last post
Poulan Pro 295

Started by rms61moparman « 1 2 ... 9 10 » Poulan

94 Replies
3107 Views
Last post October 22, 2017, 10:54:42 pm
by Cut4fun .
Poulan 425

Started by Cut4fun « 1 2 » Poulan

15 Replies
1079 Views
Last post March 18, 2014, 02:19:35 pm
by Cut4fun .
17 Replies
768 Views
Last post May 24, 2017, 06:52:22 pm
by 3000 FPS
Poulan 445

Started by 3000 FPS « 1 2 ... 18 19 » Poulan

181 Replies
4568 Views
Last post August 01, 2020, 08:05:18 am
by Cut4fun
4 Replies
542 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1200 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
2 Replies
173 Views
Last post June 14, 2013, 06:20:20 pm
by Cut4fun .
9 Replies
412 Views
Last post August 04, 2014, 03:06:33 pm
by ChipsAhoy
24 Replies
543 Views
Last post June 30, 2015, 12:02:15 pm
by Jason K
5 Replies
136 Views
Last post February 24, 2019, 06:10:25 pm
by Cut4fun .