Author Topic: Poulan 2000 Woodmaster  (Read 411 times)

0 Members and 0 Guests are viewing this topic.

Offline ChipsAhoy

  • 4 cube
  • **
  • Posts: 39
  • Karma: 4
Poulan 2000 Woodmaster
« on: August 03, 2014, 08:18:11 am »
This saw was dropped off yesterday (recycle center) along with  J-red and Mac parts saws. This one is complete in nice cosmetic shape and the old gent was the original owner. I don't want to keep it, but I'd like to see if it would run first.
Poulan does not go back that far with info (ANSI 1985 compliant) so I'm figuring it's '85 or later mfg. and I'm not sure the oil mix ratio. I'm thinking it's 50:1 but would like to verify that.  SN is 1L221J632
Thanks

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 2000 Woodmaster
« Reply #1 on: August 03, 2014, 09:07:59 am »
Most poulans I have seen list 40:1.  50:1 is a epa thing IMO.  I would go at least 40:1.   I run 32:1

I bought a poulan 2000 new in 1994 and it was 40:1.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 2000 Woodmaster
« Reply #2 on: August 03, 2014, 09:12:44 am »
poulan 2000 owners manual operators manual  http://www.poulan.com/ddoc/POUO/POUO1991_USen/POUO1991_USen__5300675808.pdf

Page 9 of 24 says 40:1

I have the hard copy owners manual too.

poulan 1800 -1800 super - woodshark - 2000 IPL  http://www.poulan.com/ddoc/POUI/POUI1996_USen/POUI1996_USen__530083694.pdf
REDNECK Saw Repair Getter Done

Offline ChipsAhoy

  • 4 cube
  • **
  • Posts: 39
  • Karma: 4
Re: Poulan 2000 Woodmaster
« Reply #3 on: August 03, 2014, 09:42:34 am »
Thanks a lot, appreciate it.

Offline ChipsAhoy

  • 4 cube
  • **
  • Posts: 39
  • Karma: 4
Re: Poulan 2000 Woodmaster
« Reply #4 on: August 03, 2014, 11:43:13 am »
Can you tell by the SN what the year of mfg was?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 2000 Woodmaster
« Reply #5 on: August 03, 2014, 11:46:19 am »
Not me. But if I had to WAG 1L221J632 

1991   

I have no clue just going by the 1 at beginning of the serial number.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 2000 Woodmaster
« Reply #6 on: August 03, 2014, 11:48:46 am »
More 2000 info I have saved.

2000   1995   $149.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    33
   
Engine Size Cubic Inches:    2
Bar Oiler Type:    Automatic
   
Bar Length:    16
   
2000   1994   $159.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    33
   
Engine Size Cubic Inches:    2
Dry Weight:    7.8
   
Bar Oiler Type:    Automatic
   
Bar Length:    12
2000   1992   $189.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    33
   
Engine Size Cubic Inches:    2
Dry Weight:    8
   
Bar Oiler Type:    Automatic
   
Bar Length:    12
2000   1991   $179.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    33
   
Engine Size Cubic Inches:    2
Dry Weight:    8
   
Bar Oiler Type:    Automatic
   
Bar Length:    12
2000   1990   $169.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    33
   
Engine Size Cubic Inches:    2
Dry Weight:    8
   
Bar Oiler Type:    Automatic
   
Bar Length:    12
2000   1989   $169.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    33
   
Engine Size Cubic Inches:    2
Dry Weight:    8
   
Bar Oiler Type:    Automatic
   
Bar Length:    12
2000   1988   $169.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    33
   
Engine Size Cubic Inches:    2
Dry Weight:    9.4
   
Bar Oiler Type:    Automatic
   
Bar Length:    12
2000   1987   $164.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    33
   
Engine Size Cubic Inches:    2
Dry Weight:    7.8
   
Bar Oiler Type:    Automatic
   
Bar Length:    12
2000   1983   $139.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    33
   
Engine Size Cubic Inches:    2
Dry Weight:    7.4
   
Bar Oiler Type:    Automatic
   
Bar Length:    12


REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 2000 Woodmaster
« Reply #7 on: August 03, 2014, 11:50:32 am »
Mine had come with 16"


2000-14SN   1986   $195.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    33
   
Engine Size Cubic Inches:    2
Dry Weight:    7.9
   
Bar Oiler Type:    Automatic
   
Bar Length:    14
2000-14SN   1985   $194.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    33
   
Engine Size Cubic Inches:    2
Dry Weight:    9.4
   
Bar Oiler Type:    Automatic
   
Bar Length:    14
2000-14SN   1984   $190.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    33
   
Engine Size Cubic Inches:    2
Dry Weight:    7.5
   
Bar Oiler Type:    Automatic
   
Bar Length:    14

2000-12SN   1984   $160.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    33
   
Engine Size Cubic Inches:    2
Dry Weight:    7.5
   
Bar Oiler Type:    Automatic
   
Bar Length:    12
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4459
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Poulan 2000 Woodmaster
« Reply #8 on: August 03, 2014, 10:20:10 pm »
I have a 2000 also and run 32-1 in it for the oil and gas mixture.   Not a bad little reed valve engine.   Lots of used and new parts still available on the net for these also.
PP 505, 475, 445.

Offline ChipsAhoy

  • 4 cube
  • **
  • Posts: 39
  • Karma: 4
Re: Poulan 2000 Woodmaster
« Reply #9 on: August 04, 2014, 03:06:33 pm »
Thanks for the help and information guys. The neighbor came over and we were checking it out. I really hadn't done anything to it yet other than adjusting the chain. So we are thinking "will it run"?
So we put some gas in it and 1/2 dozen pulls later is running. Sputters & stops. Start it again and it does the same thing. 3rd try it fired up and smoothed out. We cut some wood for about 5 minutes and he says "what do you want for it"?
I says, how about $25. He gives me the money, we have a beer to seal the deal, and he takes it home.
Don't ya just luv a happy ending..  ;D

 

Related Topics

  Subject / Started by Replies Last post
17 Replies
764 Views
Last post May 24, 2017, 06:52:22 pm
by 3000 FPS
Poulan 445

Started by 3000 FPS « 1 2 ... 17 18 » Poulan

177 Replies
4521 Views
Last post June 20, 2020, 12:21:47 pm
by Cut4fun .
7 Replies
519 Views
Last post April 13, 2014, 08:11:42 pm
by Cut4fun .
0 Replies
190 Views
Last post October 02, 2012, 11:36:18 am
by mweba
4 Replies
536 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1188 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
2 Replies
173 Views
Last post June 14, 2013, 06:20:20 pm
by Cut4fun .
24 Replies
536 Views
Last post June 30, 2015, 12:02:15 pm
by Jason K
8 Replies
134 Views
Last post June 11, 2015, 11:48:52 pm
by 660magnum
5 Replies
135 Views
Last post February 24, 2019, 06:10:25 pm
by Cut4fun .