Author Topic: poulan 2050 carb linkage  (Read 911 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22187
  • Karma: 560
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: poulan 2050 carb linkage
« Reply #10 on: June 01, 2013, 09:47:33 am »
Back when racing we used to make one of a kind chainsaw linkages from metal clothes hangers and then I started to use something Al Smith hook me up with. Cant remember the wires name off hand but it was stiffer then hanger wire. 

You can take another carb linkage and rebend it too. Heat sometimes is needed for bending.

Poulan 2050 IPL  http://s30387.gridserver.com/partsDiagrams/Poulan%202050.pdf
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22187
  • Karma: 560
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: poulan 2050 carb linkage
« Reply #11 on: June 01, 2013, 09:58:12 am »
Part # 530037809  throttle linkage.

These below saws also use the same linkage. If my reference is right.

2025 Gas Saw-->Handle & External Power Unit
2350 Gas Saw-->Handle & External Power Unit
PP210 Gas Saw-->Handle, Chassis & Bar Assembly
1900 Gas Saw-->Handle, Chassis & Bar Assembly
1900 LE Gas Saw-->Handle, Chassis & Bar Assembly
1950 Gas Saw Type 1-->Chassis & Bar Assembly Type 1-6
1950 Gas Saw Type 2-->Chassis & Bar Assembly Type 1-6
1950 Gas Saw Type 3-->Chassis & Bar Assembly Type 1-6
1950 Gas Saw Type 4-->Chassis & Bar Assembly Type 1-6
1950 Gas Saw Type 5-->Chassis & Bar Assembly Type 1-6
1950 Gas Saw Type 6-->Chassis & Bar Assembly Type 1-6
1950 Gas Saw Type 7-->Chassis & Bar Assembly Type 7
1950LE Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1
1950LE Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 2
1975 Woodshark Gas Saw Type 1-->Handle & External Assembly Type 1-6
1975 Woodshark Gas Saw Type 2-->Handle & External Assembly Type 1-6
1975 Woodshark Gas Saw Type 3-->Handle & External Assembly Type 1-6
1975 Woodshark Gas Saw Type 4-->Handle & External Assembly Type 1-6
1975 Woodshark Gas Saw Type 5-->Handle & External Assembly Type 1-6
1975 Woodshark Gas Saw Type 6-->Handle & External Assembly Type 1-6
1975 Woodshark Gas Saw Type 7-->Handle & External Assembly Type 7
1975LE Woodshark Gas Saw Type 1-->Handle & External Assembly Type 1
1975LE Woodshark Gas Saw Type 2-->Handle & External Assembly Type 2
2050 Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1-6
2050 Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 1-6
2050 Gas Saw Type 3-->Handle, Chassis & Bar Assembly Type 1-6
2050 Gas Saw Type 4-->Handle, Chassis & Bar Assembly Type 1-6
2050 Gas Saw Type 5-->Handle, Chassis & Bar Assembly Type 1-6
2050 Gas Saw Type 6-->Handle, Chassis & Bar Assembly Type 1-6
2050 Gas Saw Type 7-->Handle, Chassis & Bar Assembly Type 7
2050LE Gas Saw Type 1-->Handle, Chassis & Bar Assembly
2050LE Gas Saw Type 2-->Handle, Chassis & Bar Assembly
2050WT Gas Saw Type 1-->Chassis & Handle Assembly Type 1 - 6
2050WT Gas Saw Type 2-->Chassis & Handle Assembly Type 1 - 6
2050WT Gas Saw Type 3-->Chassis & Handle Assembly Type 1 - 6
2050WT Gas Saw Type 4-->Chassis & Handle Assembly Type 1 - 6
2050WT Gas Saw Type 5-->Chassis & Handle Assembly Type 1 - 6
2050WT Gas Saw Type 6-->Chassis & Handle Assembly Type 1 - 6
2050WT Gas Saw Type 7-->Chassis & Handle Assembly Type 7
2055 Gas Chain Saw Type 1-->Handle, Chassis & Bar Assembly Type 1-6
2055 Gas Chain Saw Type 2-->Handle, Chassis & Bar Assembly Type 1-6
2055 Gas Chain Saw Type 3-->Handle, Chassis & Bar Assembly Type 1-6
2055 Gas Chain Saw Type 4-->Handle, Chassis & Bar Assembly Type 1-6
2055 Gas Chain Saw Type 5-->Handle, Chassis & Bar Assembly Type 1-6
2055 Gas Chain Saw Type 6-->Handle, Chassis & Bar Assembly Type 1-6
2055 Gas Chain Saw Type 7-->Handle, Chassis & Bar Assembly Type 7
2055LE Gas Chain Saw Type 1-->Chassis & Handle Assembly Type 1
2055LE Gas Chain Saw Type 2-->Chassis & Handle Assembly Type 2
2075 Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2075 Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2075 Gas Saw Type 3-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2075 Gas Saw Type 4-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2075 Gas Saw Type 5-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2075 LE Gas Saw-->Handle, Chassis & Bar Assembly
2075C Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2075C Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2075C Gas Saw Type 3-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2075C Gas Saw Type 4-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2075C Gas Saw Type 5-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2075OC Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2075OC Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2075OC Gas Saw Type 3-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2075OC Gas Saw Type 4-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2075OC Gas Saw Type 5-->Handle, Chassis & Bar Assembly Type 1,2,3,4,5
2150 Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1-6
2150 Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 1-6
2150 Gas Saw Type 3-->Handle, Chassis & Bar Assembly Type 1-6
2150 Gas Saw Type 4-->Handle, Chassis & Bar Assembly Type 1-6
2150 Gas Saw Type 5-->Handle, Chassis & Bar Assembly Type 1-6
2150 Gas Saw Type 6-->Handle, Chassis & Bar Assembly Type 1-6
2150 Gas Saw Type 7-->Handle, Chassis & Bar Assembly Type 7
2150 Predator Gas Saw Type 1-->Handle & External Assembly
2150 Predator Gas Saw Type 2-->Handle & External Assembly
2150 Predator Gas Saw Type 3-->Handle & External Assembly
2150 Predator Gas Saw Type 4-->Handle & External Assembly
2150 Predator Gas Saw Type 5-->Handle & External Assembly
2150 Predator Gas Saw Type 6-->Handle & External Assembly
2150LE Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1
2150LE Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 2
2150LE Predator Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1
2150LE Predator Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 2
2150LX Gas Saw-->Chassis & Handle Assembly
2155 Poulan Plus Gas Saw Type 1-->Handle, Chassis & Bar Assembly
2155 Poulan Plus Gas Saw Type 2-->Handle, Chassis & Bar Assembly
2155 Poulan Plus Gas Saw Type 3-->Handle, Chassis & Bar Assembly
2155 Poulan Plus Gas Saw Type 4-->Handle, Chassis & Bar Assembly
2155 Poulan Plus Gas Saw Type 5-->Handle, Chassis & Bar Assembly
2175 Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1-6
2175 Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 1-6
2175 Gas Saw Type 3-->Handle, Chassis & Bar Assembly Type 1-6
2175 Gas Saw Type 4-->Handle, Chassis & Bar Assembly Type 1-6
2175 Gas Saw Type 5-->Handle, Chassis & Bar Assembly Type 1-6
2175 Gas Saw Type 6-->Handle, Chassis & Bar Assembly Type 1-6
2175 Gas Saw Type 7-->Handle, Chassis & Bar Assembly Type 7
2175LE Gas Saw-->Handle, Chassis & Bar Assembly
222 Gas Saw-->Handle & Chassis & Bar Assembly
2375 Gas Saw Type 1-->Handle, Chassis & Bar Assembly Type 1-6
2375 Gas Saw Type 2-->Handle, Chassis & Bar Assembly Type 1-6
2375 Gas Saw Type 3-->Handle, Chassis & Bar Assembly Type 1-6
2375 Gas Saw Type 4-->Handle, Chassis & Bar Assembly Type 1-6
2375 Gas Saw Type 5-->Handle, Chassis & Bar Assembly Type 1-6
2375 Gas Saw Type 6-->Handle, Chassis & Bar Assembly Type 1-6
2375 Gas Saw Type 7-->Handle, Chassis & Bar Assembly Type 7
 
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22187
  • Karma: 560
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: poulan 2050 carb linkage
« Reply #12 on: June 01, 2013, 10:03:10 am »
Scott username here Chainsawr ships world wide. Here is his website and linkage for a 2150 which shows same part number. Just double check with him to  make sure.    http://store.chainsawr.com/products/poulan-2150-chainsaw-throttle-link-rod

REDNECK Saw Repair Getter Done

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4494
  • Karma: 278
  • Location: Carpenter, Wyoming
Re: poulan 2050 carb linkage
« Reply #13 on: June 01, 2013, 01:20:16 pm »
Welding wire for a tig welder works great.   It comes in different sizes and In stainless or mild steel.    Ask a welder for a small piece if you know one.
PP 505, 475, 445.

Offline pete

  • Piped Saw
  • *****
  • Posts: 496
  • Karma: 37
Re: poulan 2050 carb linkage
« Reply #14 on: June 02, 2013, 07:18:09 am »
Thanks guys trying to get my computer to let me use the email button but it wont let me gonna search for his email and do it manually    I have made a few linkages but in the past I have had something to copy physically cheers

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22187
  • Karma: 560
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: poulan 2050 carb linkage
« Reply #15 on: June 02, 2013, 08:14:31 am »
Thanks guys trying to get my computer to let me use the email button but it wont let me gonna search for his email and do it manually

PM coming with his email
REDNECK Saw Repair Getter Done

Offline pete

  • Piped Saw
  • *****
  • Posts: 496
  • Karma: 37
Re: poulan 2050 carb linkage
« Reply #16 on: June 03, 2013, 06:50:14 am »
Thanks got it

Offline pete

  • Piped Saw
  • *****
  • Posts: 496
  • Karma: 37
Re: poulan 2050 carb linkage
« Reply #17 on: June 23, 2013, 05:01:36 am »
This saw is giving me the s**s did the carb  got it fired up could not tune it to four stroke and no oiler working so left it for a week until today, Fired up on choke no problem idled fine but no oil  How do I get into this thing is it remove clutch and go from there, also tip it clutch side down it will race and die. Thinks me maybe bad seal which would account for not being able to tune the carb.. Are these problem saws or ok  Got it for 55 bucks on ebay but now I have a few hours into it and carb and fuel lines..   Maybe some of the electolux macs have the same oiler I have a couple that look the same on the outside just yellow.  Also have aquired in a swap the guts of whats supposed to be a pp3000 but has no outer cases so anywhere to look for numbers or ID
This also has been used as a parts saw so no muffler but Pand C look clean are they worth the effort or just ebay it on for parts that are left
I need to get me some lighter firewood sawsa as most of my stuff is collector based cheers

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: poulan 2050 carb linkage
« Reply #18 on: June 23, 2013, 06:16:25 am »
oooosh! 55 bux is way too much for one of those saws in non running condition. and to have to put more cash into it on top of that. you won't get any money from it on ebay for parts as there is way too many of them out there.
cut your losses and toss it on a shelf until some kid wants it to play with.
around my parts here, you get $50 for one that's in very good shape, runs good and cuts good.
when I grow up, i wanna be an adult.

Offline pete

  • Piped Saw
  • *****
  • Posts: 496
  • Karma: 37
Re: poulan 2050 carb linkage
« Reply #19 on: June 23, 2013, 07:49:19 am »
I wish I was in your neck of the woods down under prices are a lot more Watched one recently went to nearly 150  and the prices you guys pay for new husky's leaves me green with envy I will try find last weeks paper and post up new prices for the new xps
This 2050 was advertised starts and runs needs tune up was my late brothers saw been sitting on a shelf looks good and all the rest of the bull that goes with it but it looked clean and with compression so I had already left feedback loooooong b4 I got round to playing with it

 

Related Topics

  Subject / Started by Replies Last post
poulan 2050

Started by pete Poulan

8 Replies
342 Views
Last post November 20, 2012, 07:49:28 am
by brokenbudget
1 Replies
174 Views
Last post March 31, 2013, 09:51:03 pm
by Remington
6 Replies
342 Views
Last post September 26, 2013, 03:16:07 pm
by sharkey
68 Replies
2013 Views
Last post August 01, 2016, 10:02:15 pm
by 3000 FPS
15 Replies
863 Views
Last post May 01, 2014, 10:58:35 am
by 660magnum
Poulan 3450 Carb issues

Started by rockfishon « 1 2 ... 7 8 » Poulan

77 Replies
1111 Views
Last post August 27, 2015, 07:55:47 pm
by Eccentric
3 Replies
5495 Views
Last post December 03, 2014, 04:08:24 pm
by Windy_Acres
5 Replies
135 Views
Last post May 04, 2015, 11:29:40 pm
by 3000 FPS
15 Replies
619 Views
Last post September 09, 2015, 10:06:43 pm
by Eccentric
5 Replies
142 Views
Last post December 11, 2015, 05:11:29 pm
by jrbarba