Author Topic: Poulan 2250: Chain Keeps Coming Loose (Read 1083 times)

davbell22602 · « **Reply #10 on:** December 16, 2012, 03:31:39 pm »

Quote from: Cut4fun_ on December 16, 2012, 03:24:54 pm

What is the drive link of the chain? What is the bar length and dl count listed on bar?

I'm still betting overly stretched chain or wrong chain.

18in bar and here's the numbers on the bar530044693 RZ, 18, 91. My chain is 62 drive links. I just noticed the bar is slightly bent/warped about a 1/8 in.

3000 FPS · « **Reply #11 on:** December 16, 2012, 03:41:38 pm »

Quote from: davbell22602 on December 16, 2012, 03:15:56 pm

I dont know. This was a freebie saw. I been having issues with a loose ever since I got it.

The slight bend in the bar will not cause it to loosen up. If that is the original sprocket and it looks like it could be I would replace it. I cannot tell from the video how bad or how it is worn but it does show signs of wear so I would replace it.

Cut4fun . · « **Reply #12 on:** December 16, 2012, 03:45:09 pm »

Do you have another 62dl chain that is known good to try.

davbell22602 · « **Reply #13 on:** December 16, 2012, 03:51:21 pm »

Quote from: Cut4fun_ on December 16, 2012, 03:45:09 pm

Do you have another 62dl chain that is known good to try.

Yes I got silver streak and Carlton chain I got from my Stens rep to try out on this saw.

Cut4fun . · « **Reply #14 on:** December 16, 2012, 03:58:28 pm »

Just thought of something to try too. This will tell info on the spur sprocket.
Tighten chain up like normal. Then use your hand and move chain forward around and around. It should be smooth with NO BINDING. If it is catching or binding up the spur sprocket is worn.

3000 FPS · « **Reply #15 on:** December 16, 2012, 04:00:28 pm »

I am very curious now so post what you find out when you try the new chain. Is that a 3/8 low pro chain.

davbell22602 · « **Reply #16 on:** December 16, 2012, 04:11:49 pm »

Quote from: 3000 FPS on December 16, 2012, 04:00:28 pm

I am very curious now so post what you find out when you try the new chain. Is that a 3/8 low pro chain.

Yes low profile chain.

Chainsaw Repair

News:

Author Topic: Poulan 2250: Chain Keeps Coming Loose (Read 1083 times)

davbell22602

Re: Poulan 2250: Chain Keeps Coming Loose

3000 FPS

Re: Poulan 2250: Chain Keeps Coming Loose

Cut4fun .

Re: Poulan 2250: Chain Keeps Coming Loose

davbell22602

Re: Poulan 2250: Chain Keeps Coming Loose

Cut4fun .

Re: Poulan 2250: Chain Keeps Coming Loose

3000 FPS

Re: Poulan 2250: Chain Keeps Coming Loose

davbell22602

Re: Poulan 2250: Chain Keeps Coming Loose

Related Topics