Author Topic: Poulan 2300AV  (Read 445 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22194
  • Karma: 561
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Poulan 2300AV
« on: February 07, 2014, 08:52:05 pm »
So was there only the poulan 2300 AV in this or was there 1800 2000 AV ones too? I have only seen pics of poulan 2300AV. 

Not talking the 2300CVA. Just AV.
REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4495
  • Karma: 278
  • Location: Carpenter, Wyoming
Re: Poulan 2300AV
« Reply #1 on: February 07, 2014, 09:32:07 pm »
I am like you I have not seen or heard of the 2000 or 1800 with anti vibration.
PP 505, 475, 445.

Offline fossil

  • 6 cube
  • ****
  • Posts: 200
  • Karma: 61
  • Location: Brampton, Ontario
Re: Poulan 2300AV
« Reply #2 on: February 08, 2014, 11:17:17 am »
2300 AV and CVA ,1800 and 1800 super OPs manual includes 2000 and 2000AV available on the Poulan.com website.

I have a Poulan branding and model date control 1991 document, which shows Poulan from about 1971 to I think around 1997, saws that were rebranded shows a 2000AV. I can't upload either due to file size. It's an interesting document with rebranded Poulans I can almost guarantee you've never knew existed.
Tim

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4139
  • Karma: 175
  • OHIO REDNECK
Re: Poulan 2300AV
« Reply #3 on: February 08, 2014, 11:28:55 am »
PM coming with email for info.  See if it one I have already and forgot about.  Thanks Tim.
REDNECK Saw Repair

Offline fossil

  • 6 cube
  • ****
  • Posts: 200
  • Karma: 61
  • Location: Brampton, Ontario
Re: Poulan 2300AV
« Reply #4 on: February 08, 2014, 02:03:33 pm »
e-mail sent.
Tim

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4139
  • Karma: 175
  • OHIO REDNECK
Re: Poulan 2300AV
« Reply #5 on: February 08, 2014, 02:50:27 pm »
e-mail sent.

Got it and downloaded it looked at it.  Thanks.
I think it is posted here somewhere already. Remembering where is a whole nother thing.


Link it here too. 
REDNECK Saw Repair

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2111
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Poulan 2300AV
« Reply #6 on: February 12, 2014, 02:26:29 pm »
Kevin looking at the 2300AV saws...........I think you could retrofit the handlebar and top AV mount from a 2300AV onto a non-AV Micro series saw.  The bottom of the handlebar attaches the same way as the non-AV saws, and the top mount has an extention that fits into the regular handlebar mount section of the crankcase. 

The crankcases are the same part # for a 2300AV and the 1800/2000 Micros.  The rear handle assembly, carb box, and AF cover are different part #'s but look the same.  Not sure if they could be used or if they'd have to swaped over too.  Maybe there's a clearanced are on those parts to make room for the top AV mount assembly.  Dunno.  Those parts along with the handlebar/AV assembly are often up for sale by on ebay by the saw breakers.

Another way to skin the cat.....

http://www.barrettsmallengine.com/partslist/poulan1800superchainsaw.pdf

http://www.barrettsmallengine.com/partslist/poulan2300avchainsaw.pdf
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22194
  • Karma: 561
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 2300AV
« Reply #7 on: February 12, 2014, 02:44:34 pm »
Never even thought about doing that.

Dang Thanks for the all the  leg work on that.   

You know after looking at that 2300cva on Roger's scale it isnt as bad as I thought. I just remember working on one in 08-09 for a friend and it seemed unbalanced and heavy compared to my 2000.  Scales show not to bad on the weight part.
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2111
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Poulan 2300AV
« Reply #8 on: February 12, 2014, 03:03:20 pm »
Never even thought about doing that.

Dang Thanks for the all the  leg work on that.   

You know after looking at that 2300cva on Roger's scale it isnt as bad as I thought. I just remember working on one in 08-09 for a friend and it seemed unbalanced and heavy compared to my 2000.  Scales show not to bad on the weight part.

You're welcome Kevin.  The CVA Micros do feel bulky compared to the AV and 'regular' Mircros.  Big handlebar setup.  Reminds me of the PM300 series McCullochs in that regard.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline fossil

  • 6 cube
  • ****
  • Posts: 200
  • Karma: 61
  • Location: Brampton, Ontario
Re: Poulan 2300AV
« Reply #9 on: February 12, 2014, 06:14:05 pm »
Roger's was hollow Kevin.
Tim

 

Related Topics

  Subject / Started by Replies Last post
Poulan 425

Started by Cut4fun « 1 2 » Poulan

15 Replies
1106 Views
Last post March 18, 2014, 02:19:35 pm
by Cut4fun .
17 Replies
776 Views
Last post May 24, 2017, 06:52:22 pm
by 3000 FPS
Poulan 445

Started by 3000 FPS « 1 2 ... 18 19 » Poulan

181 Replies
4656 Views
Last post August 01, 2020, 08:05:18 am
by Cut4fun
7 Replies
526 Views
Last post April 13, 2014, 08:11:42 pm
by Cut4fun .
0 Replies
192 Views
Last post October 02, 2012, 11:36:18 am
by mweba
Poulan 395

Started by 3000 FPS « 1 2 3 » Poulan

23 Replies
986 Views
Last post January 05, 2013, 09:09:29 pm
by 3000 FPS
4 Replies
589 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1314 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
Poulan 335

Started by 3000 FPS « 1 2 3 4 5 » Poulan

46 Replies
1365 Views
Last post February 14, 2020, 09:23:59 am
by Cut4fun .
Poulan 380

Started by Cut4fun . « 1 2 ... 7 8 » Poulan

78 Replies
2192 Views
Last post March 01, 2020, 08:06:34 am
by Cut4fun .