Author Topic: Poulan 2300AV  (Read 445 times)

0 Members and 0 Guests are viewing this topic.

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4495
  • Karma: 278
  • Location: Carpenter, Wyoming
Re: Poulan 2300AV
« Reply #20 on: February 16, 2014, 10:28:53 am »
Nice Aaron.     It should make a good runner and the red paint looks to be in great shape.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22194
  • Karma: 561
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 2300AV
« Reply #21 on: February 16, 2014, 03:35:03 pm »
I had thought there was a rubber AV mount under the rear part of back handle too?  Not seeing one in pic, so just on the front handle is AV?



REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4495
  • Karma: 278
  • Location: Carpenter, Wyoming
Re: Poulan 2300AV
« Reply #22 on: February 16, 2014, 04:42:37 pm »
I had thought there was a rubber AV mount under the rear part of back handle too?  Not seeing one in pic, so just on the front handle is AV?





That is the difference between th 2300av and the 2300cva.   Then the plain 2300 has no rubber Antivibe any where.
PP 505, 475, 445.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2111
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Poulan 2300AV
« Reply #23 on: February 16, 2014, 04:46:17 pm »
Yep.  The AV saws only have the one AV mount (and are 'between' the regular Micros and the CVA saws).  The CVA saws are the ones with the AV mounts at the front and rear.  Early Micro CVA saws (Like a Micro   XXV CVA Deluxe) look somewhat like a S25-CVA (with a cast mag rear handle that's painted the same color as the body of the saw)...........while the later ones (such as a 2300CVA) have the larger black handlebar/rear handle setup somewhat like a PM300 series McCulloch.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22194
  • Karma: 561
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 2300AV
« Reply #24 on: February 16, 2014, 05:01:49 pm »
Must have been a S25 XXV or something I seen with rear AV  handle (with rubber right under the rear handle). Not like the 2300CVA


Yep here they are and what I was thinking of. I was thinking the 2300AV had this AV at rear too. Oh well.




REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2111
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Poulan 2300AV
« Reply #25 on: February 16, 2014, 05:08:01 pm »
Must have been a S25 XXV or something I seen with rear AV  handle (with rubber right under the rear handle). Not like the 2300CVA


Yep here they are and what I was thinking of. I was thinking the 2300AV had this AV at rear too. Oh well.






Early CVA Micro variants are somewhat similar to those S25-CVA saws.  Will see if I can find a pic.  You want a S25-CVA?  I may be able to hook you up with one.  I have a few...

Edit:

Here's CVA Micro series saw that belongs to a friend of mine up in Canada.  Has English and French markings.  Super XXV Micro CVA Deluxe..............or something like that.  Poulan would have done us a service if they hadn't comingled the naming elements of the XXV and Micro series saws.....



-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline fossil

  • 6 cube
  • ****
  • Posts: 200
  • Karma: 61
  • Location: Brampton, Ontario
Re: Poulan 2300AV
« Reply #26 on: February 16, 2014, 05:43:01 pm »
Nice find. Especially with the rim sprocket set up.
Tim

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2111
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Poulan 2300AV
« Reply #27 on: February 16, 2014, 05:52:00 pm »
Thanks Tim.  The pic above is the one I tried (without success) to post on AS a while back.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22194
  • Karma: 561
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 2300AV
« Reply #28 on: February 16, 2014, 06:24:40 pm »
That last pic you posted of the silver one is interesting.   Thanks.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
Poulan 425

Started by Cut4fun « 1 2 » Poulan

15 Replies
1106 Views
Last post March 18, 2014, 02:19:35 pm
by Cut4fun .
17 Replies
776 Views
Last post May 24, 2017, 06:52:22 pm
by 3000 FPS
Poulan 445

Started by 3000 FPS « 1 2 ... 18 19 » Poulan

181 Replies
4656 Views
Last post August 01, 2020, 08:05:18 am
by Cut4fun
7 Replies
526 Views
Last post April 13, 2014, 08:11:42 pm
by Cut4fun .
0 Replies
192 Views
Last post October 02, 2012, 11:36:18 am
by mweba
Poulan 395

Started by 3000 FPS « 1 2 3 » Poulan

23 Replies
986 Views
Last post January 05, 2013, 09:09:29 pm
by 3000 FPS
4 Replies
589 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1314 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
Poulan 335

Started by 3000 FPS « 1 2 3 4 5 » Poulan

46 Replies
1365 Views
Last post February 14, 2020, 09:23:59 am
by Cut4fun .
Poulan 380

Started by Cut4fun . « 1 2 ... 7 8 » Poulan

78 Replies
2192 Views
Last post March 01, 2020, 08:06:34 am
by Cut4fun .