Author Topic: Poulan 3000 to 3400 (Read 624 times)

Tractorsaw1 · « **Reply #10 on:** March 26, 2014, 11:24:46 am »

Hey now, some folks like that shade of "goat vomit green" Ha Ha

KilliansRedLeo · « **Reply #11 on:** March 26, 2014, 01:54:17 pm »

I like it too, just reminds me of a 1970s Suzuki RN-250 MX bike. Would be interesting to find the paint and match it to the Poulan color.

3000 FPS · « **Reply #12 on:** March 26, 2014, 02:30:59 pm »

Quote from: KilliansRedLeo on March 26, 2014, 01:54:17 pm

I like it too, just reminds me of a 1970s Suzuki RN-250 MX bike. Would be interesting to find the paint and match it to the Poulan color.

You never know.

Cut4fun . · « **Reply #13 on:** April 13, 2014, 07:28:49 pm »

I was comparing a 335 54cc and 380 60cc cylinder yesterday. The inside measurement of front holes was about 3mm narrower total on 3000 49cc cyl going by inside side of hole.

So thinking just slotting the 380 holes this would bolt on after that.

One could use the bigger intake boot and carb too for little more gains.

Cut4fun . · « **Reply #14 on:** April 13, 2014, 07:32:37 pm »

Tim's poulan 3000 he was talking about. With nice chain brake side cover too.

3000 FPS · « **Reply #15 on:** April 13, 2014, 07:39:50 pm »

That is a nice clean saw.

Tractorsaw1 · « **Reply #16 on:** April 15, 2014, 08:29:22 pm »

Kevin I think I can salvage the 60cc jug I took off my 380 & will try it on the other 2700 if you get it done before me let me know how it goes.

Chainsaw Repair

News:

Author Topic: Poulan 3000 to 3400 (Read 624 times)

Tractorsaw1

Re: Poulan 3000 to 3400

KilliansRedLeo

Re: Poulan 3000 to 3400

3000 FPS

Re: Poulan 3000 to 3400

Cut4fun .

Re: Poulan 3000 to 3400

Cut4fun .

Re: Poulan 3000 to 3400

3000 FPS

Re: Poulan 3000 to 3400

Tractorsaw1

Re: Poulan 3000 to 3400

Related Topics