Author Topic: Poulan 3450 60cc  (Read 1379 times)

0 Members and 1 Guest are viewing this topic.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: Poulan 3300
« Reply #10 on: March 09, 2013, 11:03:05 pm »
I dont know for sure as I havent tried it yet.

But guessing the PP365 3500 60cc tops with smaller pattern will fit the 3000 305 etc.

The 3750 380 60cc had the larger bolt pattern and only fit the 330 3450 saws.
REDNECK Saw Repair

Offline Barneyrb

  • 4 cube
  • **
  • Posts: 26
  • Karma: 11
Re: Poulan 3300
« Reply #11 on: March 10, 2013, 09:15:56 am »
I always thought the 365/380 was on the same base bolt pattern and the smaller saws were different. I never knew there were 2 different bolt patterns on the 60cc jugs. Learn something new every day........

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: Poulan 3300
« Reply #12 on: March 10, 2013, 10:23:43 am »
Looking for tank sticker numbers off 330 3450 3500 3600 3300. Looking for a tag to match 530-054516

REDNECK Saw Repair

Offline dutchsawdoctor

  • Gas Hotsaw
  • ******
  • Posts: 582
  • Karma: 45
  • Love repairing old saws
  • Location: Netherlands Flevoland
    • Saul's kettingzagen site
Re: Poulan 3300
« Reply #13 on: March 10, 2013, 01:45:59 pm »
Wold love to see/hear how it runs ::)( and see you dancing ) ;D
Best regards,Saul
Dolmar  Stihl Solo Husqvarna Homelite Ole-mac Echo Jobu Ridgid Poulan Remington Pioneer Partner ,Danarm stanley
more chainsaw repairs Oldtimer-Motorsägen  http://pily.strojevlese.cz / http://www.sauls-kettingzagen-site.nl

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21886
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3300
« Reply #14 on: March 10, 2013, 02:06:31 pm »
I just compared this saw I pulled the 60cc top from to my 3500 and the flywheel is different, bar studs are different, upper left av is different then 3500 and the grey poulan craftsman 3000. 3500 and grey 3000 match but not this new one.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21886
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3300
« Reply #15 on: March 10, 2013, 02:28:11 pm »
Found another difference on the new saw that had 60cc top and a my other 3500 60cc. Even though same cylinder numbers. The new saw impulse nipple is on the cylinder and the 3500 has the impulse nipple in the crankcase below the cylinder.

Flywheel etc is different then the 3600 I just checked too in pics.

Also the new saw has the wider muffler area on crankcase, not the narrower like 3000.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21886
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3300
« Reply #16 on: March 10, 2013, 03:45:17 pm »
I wonder what my 3000 would run like with the bigger carb and air filter set up off of a 3450/330...hmmmm

I was planning on putting a 60cc on the grey craftsman poulan 3000   ;D with big intake and carb from 330 etc.  Ask 3000 fps I told him this a few days ago.



Hit a road block on my conversion today. No bigger intakes left, had to order one and went ahead and ordered a extra carb too, just in case. Even though I know I have a carb in the carb bins.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21886
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3300
« Reply #17 on: March 10, 2013, 03:46:44 pm »



So am I reading this sticker right?  Type 4 or Type 3  ?
REDNECK Saw Repair Getter Done

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4460
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Poulan 3300
« Reply #18 on: March 10, 2013, 04:24:12 pm »
I do not see a type unless the -4 after the serial number is the type?   I do not know alot about the 3300 saws but I know that the cylinder off of the 365 does not have the impulse in the cylinder and is a gilardoni.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21886
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3300
« Reply #19 on: March 10, 2013, 04:37:03 pm »
Even tough it was sold as a 3300 I dont think it is being it has the wider muffler and crankcase area for wider muffler.

I dont have a 3300 to look at that area anymore. But the grey poulan 3000 is narrow crankcase area for smaller muffler.

So does 3300 have narrow or wider muffler?


I forgot I had a 365 on the shelf. Will check or see if pics show.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
242 Replies
7779 Views
Last post March 23, 2020, 06:17:53 pm
by Cut4fun .
Poulan 330 3450

Started by Cut4fun . « 1 2 ... 33 34 » Poulan

330 Replies
9940 Views
Last post March 03, 2020, 03:15:53 pm
by Cut4fun .
3 Replies
347 Views
Last post February 03, 2013, 06:33:10 pm
by 660magnum
16 Replies
1002 Views
Last post April 11, 2014, 07:03:51 am
by Tractorsaw1
Poulan 3450 Carb issues

Started by rockfishon « 1 2 ... 7 8 » Poulan

77 Replies
1081 Views
Last post August 27, 2015, 07:55:47 pm
by Eccentric
5 Replies
328 Views
Last post October 23, 2014, 06:53:51 pm
by Cut4fun .
111 Replies
1292 Views
Last post September 27, 2015, 09:41:29 pm
by 3000 FPS
Poulan 3450 54cc 60cc

Started by Cut4fun « 1 2 3 4 5 » Poulan

43 Replies
717 Views
Last post November 02, 2015, 10:59:12 am
by Cut4fun .
2 Replies
135 Views
Last post February 28, 2018, 01:25:07 pm
by Cut4fun .
0 Replies
20 Views
Last post February 10, 2020, 08:33:25 am
by Cut4fun .