Author Topic: Poulan 3450 60cc  (Read 2000 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22581
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3300
« Reply #30 on: March 10, 2013, 06:39:01 pm »
I dont have a good scale. Just look at the weights of a 335 3000 305 compared to 365. 

There are PHO empty weights with pics posted here somewhere and Mark has them posted too.
REDNECK Saw Repair Getter Done

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4334
  • Karma: 189
  • OHIO REDNECK
Re: Poulan 3300
« Reply #31 on: March 12, 2013, 05:20:46 pm »
After taking some closer measurements with calibers and comparing base gaskets from other builds left over.  The saw was sold as a 3300 and was set up for the other older style covers, not the new air filter and covers set up like on 330 3450.  Wished it had been the 3500 or 3600 now.
 
 I have come to the conclusion this is a Type 4 3450 with a 60cc cylinder. Even though everything shows only Type 3 with 60cc cylinder. 
Even compared the torn intake to my smaller intakes and it is indeed the bigger 3450 style intake.  Carb was missing so I couldnt check that.

Even though my rough measurements showed same as the grey poulan 3000 measurements from eyeing across measure .

Anyone got any rear sticker pics or info to share off 3450 T3 T4?  The Bad Boy 3450 1999 tag has different 530- numbers.


You may or may not be able to do that. There is a bolt pattern change in there somewhere as I tried to put a 60cc top end on a 335 and the 60cc had a wider bolt spacing. I'm not real clear as to when this happened but some fit and some don't

Randy did you try a 365 or 3500 cylinder for this swap?    The 60cc on what was sold to me as a 3300 and thought was a 3500 3600 turns out to be 3450 T4. So after using calipers today and not eyeing measurements the extra 60cc isnt going to work. So now I am wondering about the 60cc 365 3500 topends fitting?
REDNECK Saw Repair

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22581
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3300 NOT = 3450
« Reply #32 on: March 12, 2013, 06:07:00 pm »
If you remember something else that was throwing me off was the newer flywheel. Now we know it is 3450 and matches this one.

REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4547
  • Karma: 292
  • Location: Carpenter, Wyoming
Re: Poulan 3300 NOT = 3450
« Reply #33 on: March 12, 2013, 07:08:03 pm »
I believe the Piston ring for a 3750 is the same as for the PP365. 



My bad meant to quote.  :-[
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22581
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3300 NOT = 3450
« Reply #34 on: March 12, 2013, 07:15:42 pm »
I believe the Piston ring for a 3750 is the same as for the PP365. 

Yep when I ordered rings for 3750 I also got them for 365.   I swear I remember cylinders being different pattern though.

But remember  54cc 3450 330 ring works in the 335 with 3450 style piston.

REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4547
  • Karma: 292
  • Location: Carpenter, Wyoming
Re: Poulan 3300 NOT = 3450
« Reply #35 on: March 12, 2013, 07:19:43 pm »
I believe the Piston ring for a 3750 is the same as for the PP365. 

Yep when I ordered rings for 3750 I also got them for 365.   I swear I remember cylinders being different pattern though.

But remember  54cc 3450 330 ring works in the 335 with 3450 style piston.

  Yes that would be the 335 Predator which I am sure you knew.

So is the piston the same for 365 as for the 3750.
PP 505, 475, 445.

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4547
  • Karma: 292
  • Location: Carpenter, Wyoming
Re: Poulan 3300 NOT = 3450
« Reply #36 on: March 12, 2013, 07:23:01 pm »
Never mind answered my own question.   The 3750 and 365 list the piston kit with same part number.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22581
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3300 NOT = 3450
« Reply #37 on: March 12, 2013, 07:32:58 pm »
Yes same piston 365 3750 etc.

Going by this info T4 isnt a 60cc, is this what others see?  The saw tag says 54cc but has a 60cc cyl. maybe somebody just updated it.


530071321    Piston Kit Model 3450 T1,T2,T4 | (Includes 29, 46 & 50)
530069549    Piston Kit Model 3750 T1 & T2, 3450 T3 | (Includes 29, 46 & 50)

530069487    Cylinder Gasket KIT Model 3450 T1
530069487    Cylinder Gasket KIT Model 3450 T2,T4
530069487    Cylinder Gasket KIT Model 3750 T1 & T2 3450 T3

530012367    Cylinder Ass'y. Model 3450 T1
530403749 !    Cylinder Ass'y.
530049906 !    CYLINDER W/IMPULSE 60CC       
952030120 !    

530030176    Piston Ring Model 3450 T1,T2,T4
530036176    Piston Ring Model 3750 T1 & T2 3450 T3


530049906 !    CYLINDER W/IMPULSE 60CC  3750
530403749 !    Cylinder Ass'y.
530012367    Cylinder Ass'y. Model 3450 T1

530036154    3500 & 3600 cyl
530012373 !    CYLINDER FINISHED (3.3)

530036176    3500 & 3600 ring
530030176    3350 ring

530036176    Piston Ring Model 365
530030176    Piston Ring Model 336

530036154    Cylinder Model 365
530012367    Cylinder Model 336

530069549    Piston Kit Model 365 | (Incl.29.,46.,49.)

530071321    Piston Kit | (Incl. 29, 45 & 46)   330
530403749    Cylinder Ass'y. 330
530030176    Piston Ring  330





REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22581
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3300 NOT = 3450
« Reply #38 on: March 12, 2013, 07:36:31 pm »
Guess I'll just start on the project 3500 next now while gathering parts for this 3450 with 60cc top. Think I am going to try and stay old style air filter and lower covers if I can.

Also ordered a 066 piston for one of the 2 505 projects today too.   
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4547
  • Karma: 292
  • Location: Carpenter, Wyoming
Re: Poulan 3300 NOT = 3450
« Reply #39 on: March 12, 2013, 07:41:20 pm »
The 505 should be a good one.   I have one sitting here that I am gathering parts for also.   Looking for a clutch cover.
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
250 Replies
9377 Views
Last post August 30, 2021, 07:10:31 am
by Cut4fun
Poulan 330 3450

Started by Cut4fun . « 1 2 ... 44 45 » Poulan

441 Replies
12229 Views
Last post March 22, 2021, 08:08:58 am
by Cut4fun
3 Replies
450 Views
Last post February 03, 2013, 06:33:10 pm
by 660magnum
16 Replies
1243 Views
Last post April 11, 2014, 07:03:51 am
by Tractorsaw1
Poulan 3450 Carb issues

Started by rockfishon « 1 2 ... 7 8 » Poulan

77 Replies
1293 Views
Last post August 27, 2015, 07:55:47 pm
by Eccentric
5 Replies
399 Views
Last post October 23, 2014, 06:53:51 pm
by Cut4fun .
111 Replies
2001 Views
Last post September 27, 2015, 09:41:29 pm
by 3000 FPS
Poulan 3450 54cc 60cc

Started by Cut4fun « 1 2 3 4 5 » Poulan

43 Replies
1045 Views
Last post November 02, 2015, 10:59:12 am
by Cut4fun .
2 Replies
158 Views
Last post February 28, 2018, 01:25:07 pm
by Cut4fun .
0 Replies
40 Views
Last post February 10, 2020, 08:33:25 am
by Cut4fun .