Author Topic: Poulan 335  (Read 1313 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4038
  • Karma: 159
  • OHIO REDNECK
Re: Poulan 335
« Reply #10 on: December 21, 2012, 06:54:22 pm »
I do not see any pics.   ???

I just picked 4 and loaded different above.
REDNECK Saw Repair

Offline fastleo151

  • 5 cube
  • ***
  • Posts: 103
  • Karma: 8
Re: Poulan 335
« Reply #11 on: December 21, 2012, 06:55:08 pm »
There the same as a 3300 correct?

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4038
  • Karma: 159
  • OHIO REDNECK
Re: Poulan 335
« Reply #12 on: December 21, 2012, 06:57:47 pm »
There the same as a 3300 correct?

Real close  IMO 335  better set up. My dad has a 3300 he bought new in mid 80's and still going strong. So alum bore isnt bad either.

3300 alum bore and chrome piston and thick rings

335  chrome bore and alum piston and thin rings
REDNECK Saw Repair

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4458
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Poulan 335
« Reply #13 on: December 21, 2012, 08:03:15 pm »
I myself have never owned a 3300  because they have the aluminium cylinder and went for the 335 instead.  I am really liking this last one that I modified.  I may have to do another of the ones I have.
PP 505, 475, 445.

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4458
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Poulan 335
« Reply #14 on: January 17, 2013, 04:39:12 pm »
So today I had ordered a 8 pin rim and put it on the 335.   I have a 15" round of elm the neighbor gave me for some practice wood that has been dried out for years.   Very solid and medium hard wood for tuning.   

   I have to say I was wondering if the saw was going to bog down but it pulled really well.   This little saw just keeps getting better and better.
PP 505, 475, 445.
Like Like x 1 View List

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4038
  • Karma: 159
  • OHIO REDNECK
Re: Poulan 335
« Reply #15 on: January 17, 2013, 04:54:44 pm »
8T 325 ?

8T 325 rim would be about same size as the 7T 3/8 rim. It should pull that with no problems IMO. 

I run 3/8 7 on the 3300 3000 305 335 330 etc when I have the bars to do so. Right now the grey 3000 3300 are using 325 because I dont have the extra bars to go around for them all.

REDNECK Saw Repair

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4458
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Poulan 335
« Reply #16 on: January 17, 2013, 05:01:26 pm »
Well these saws come with .325 7 pin sprockets and with a 20" bar.   I just was not sure how it would do and wanted to check it out.  I am glad you confirm what I found.    Yes 8 pin .325
PP 505, 475, 445.

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4458
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Poulan 335
« Reply #17 on: February 11, 2013, 07:07:50 pm »
I recently aquired another 335 except this one is a predator 335 that is in the red color.   I also found some other items that are different about the predator from the standard PP 335.   The piston, ring, and cylinder are all from a type I 3450.   I have the IPL's for both saws and they are a match.   

So now I am thinking, will the 3750 piston and cylinder fit on the predator 335.   I personly at this time do not see why not. 

   I have not taken the saw apart yet but will and if anything else comes up that is different I will post about it.
PP 505, 475, 445.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Poulan 335
« Reply #18 on: February 11, 2013, 07:17:46 pm »
Check the ipl's for the boot and carb cross reference also?
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21870
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 335
« Reply #19 on: February 11, 2013, 07:25:36 pm »
I recently aquired another 335 except this one is a predator 335 that is in the red color.   I also found some other items that are different about the predator from the standard PP 335.   The piston, ring, and cylinder are all from a type I 3450.   I have the IPL's for both saws and they are a match.   

So now I am thinking, will the 3750 piston and cylinder fit on the predator 335.   I personly at this time do not see why not. 

   I have not taken the saw apart yet but will and if anything else comes up that is different I will post about it.

I almost pulled the trigger on that one.  I made 1 offer.  ;)   News to me on the Pred 335 using 3450 stuff. 

What about that one guy that has that nice one?
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
534 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1182 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
2 Replies
163 Views
Last post July 04, 2014, 02:27:26 pm
by Eccentric
2 Replies
109 Views
Last post July 26, 2014, 06:52:06 pm
by 3000 FPS
Poulan micro XXV

Started by countryhog « 1 2 » Poulan

10 Replies
514 Views
Last post August 01, 2014, 09:45:30 pm
by Cut4fun .
15 Replies
301 Views
Last post August 19, 2014, 06:49:42 pm
by 3000 FPS
9 Replies
410 Views
Last post August 04, 2014, 03:06:33 pm
by ChipsAhoy
8 Replies
223 Views
Last post August 22, 2014, 02:09:00 pm
by AmericanPsycho
Poulan Pro 56cc

Started by mcbob « 1 2 » Poulan

16 Replies
310 Views
Last post October 10, 2014, 05:02:46 pm
by mcbob
20 Replies
414 Views
Last post December 29, 2014, 11:44:45 pm
by 3000 FPS