Author Topic: Poulan 3400 3700 3800 4000 piston tool  (Read 76 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22194
  • Karma: 563
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Poulan 3400 3700 3800 4000 piston tool
« on: May 01, 2020, 06:52:38 pm »
HOMELITE POULAN MCCULLOCH WRIST PIN AND BEARING REMOVAL AND INSTALLATION TOOL

Took this on trade on a poulan cylinder and piston.
https://www.sawsalvage.co/products/homelite-poulan-mcculloch-press-fit-wrist-pin-extractor-removal-tool?_pos=2&_sid=ca7a973d4&_ss=r


SOME TYPICAL SAWS THIS WILL WORK FOR:

Homelite 330
Homelite 350, 360, 450, 550, 650, 750
Poulan 3400,3700,3800,4000 etc
Mac 10-series, 700 SERIES
Mac 600 Series
Mac Large Frame

Easily and simply pull and reinstall your wrist pin for piston replacement on the aforementioned saws.   Also can be used to remove and install piston pin bearings with the larger M8 screws.
REALLY STUBBORN PINS MAY REQUIRE SOME HEAT
If you want to see a video of us using it search YouTube for:"The Duke's Saw Salvage Poulan, McCulloch, Homelite Wrist Pin Removal Tool Explained"

We use a thread insert and proper screw to step down the socket cap screw on this tool so it can be used for smaller diameter wrist pins.
Will come with:
Tool
Stainless Steel Thread Insert (Made in USA)
2-M8 Screws
2-M5 12.9 Hardness Stainless Screws
Makes a tough job a little bit simpler!

https://youtu.be/IJERNUUtGNw
REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter

Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
397 Views
Last post November 27, 2011, 02:52:55 am
by Roanoker494
0 Replies
408 Views
Last post January 21, 2012, 08:09:02 pm
by tommyhnavix
2 Replies
313 Views
Last post June 04, 2012, 02:42:51 pm
by rms61moparman
19 Replies
1582 Views
Last post May 22, 2019, 10:19:04 am
by Cut4fun .
Poulan 3800

Started by Cut4fun . « 1 2 3 » Poulan

24 Replies
694 Views
Last post May 10, 2018, 08:13:13 pm
by Eccentric
1 Replies
209 Views
Last post October 19, 2015, 03:03:17 pm
by Cut4fun .
3 Replies
201 Views
Last post July 20, 2016, 07:46:37 am
by leec
3 Replies
349 Views
Last post February 21, 2017, 07:52:38 am
by mowertech
3 Replies
124 Views
Last post July 17, 2017, 04:40:15 pm
by dcook22
21 Replies
427 Views
Last post November 03, 2020, 10:14:59 am
by Cut4fun