Author Topic: Poulan 3750 badboy 380 60cc  (Read 7804 times)

0 Members and 1 Guest are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3750 badboy 380 60cc
« Reply #60 on: July 28, 2012, 06:35:52 am »
You can still buy the 3750 top ends new real cheap. Then just bolt  them on 330 or a 3450 that isnt a 60cc already.

Gilardoni  Italian made cylinders.
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4464
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan 3750 badboy 380 60cc
« Reply #61 on: July 28, 2012, 12:15:51 pm »
Where do you find the top end at. 
PP 505, 475, 445.

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4464
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan 3750 badboy 380 60cc
« Reply #62 on: July 28, 2012, 12:29:34 pm »
Do you still have the TA 3750 that someone had put a bow saw on and the had cut away the case to fit it?
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3750 badboy 380 60cc
« Reply #63 on: July 28, 2012, 01:07:59 pm »
Do you still have the TA 3750 that someone had put a bow saw on and the had cut away the case to fit it?
Back together again  ::)  3rd TA edition I have had.






Yes #3  had a bow at one time and it is the one I had to split the crankcase do to bar oil getting into crankcase past seal. 

Also just put back together after loaning it out awhile back. Bad mistake  ::)  It's not perfect by any means.  Should have a new piston kit put in it but it's just a loaner back up type saw to me. You would crap looking at the old piston and wouldnt believe it cuts as good as it does with it.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3750 badboy 380 60cc
« Reply #64 on: July 28, 2012, 01:11:23 pm »
Where do you find the top end at. 

This is what I like about this site. We can mention any seller we want.  ;)

These are my top 3 for poulan parts. If guys have others post them up please.

http://www.ordertree.com/

http://www.outdoordistributors.com/

http://www.jackssmallengines.com/
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3750 badboy 380 60cc
« Reply #65 on: July 28, 2012, 01:18:54 pm »
Piston kit   530069549

Cylinder  530049906
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4464
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan 3750 badboy 380 60cc
« Reply #66 on: July 28, 2012, 02:55:05 pm »
Great information thanks for the reply.  Now I have a 3450, so can I just order the cylinder and piston and set this right on the old crankcase, and do I need to change the carb or anything else like covers linkage anything like that?

   Oh the TA 3750 you have can be welded and filled in where they cut it away.  But you would have to split the case again and send it along with the clutch cover to make it match up correctly then you would have to paint it. 
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3750 badboy 380 60cc
« Reply #67 on: July 28, 2012, 03:06:27 pm »
Yes everything can go right on the 3450 as a bolt up no changing nothing. Make sure your 3450 isnt one of the 60cc ones already.

Everything can be had new for $100 or less for the 60cc topend swap. Piston $40 range, cylinder $50 plus rangeup to low $60's. Shop around.

If I split that 3750 again in the future I will  let you know so you can fix that case side up. Thanks. 
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3750 badboy 380 60cc
« Reply #68 on: July 28, 2012, 03:08:31 pm »
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4464
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan 3750 badboy 380 60cc
« Reply #69 on: July 28, 2012, 03:37:15 pm »
I guess I know what my next project is going to be.  I will start looking for the cylinder and piston with the part numbers you provided.  Thanks.  Roger
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
66 Replies
2134 Views
Last post March 03, 2020, 10:13:18 am
by Cut4fun .
Poulan 3450 60cc

Started by Cut4fun . « 1 2 ... 6 7 » Poulan

66 Replies
1383 Views
Last post February 08, 2018, 07:01:11 pm
by 3000 FPS
6 Replies
361 Views
Last post October 18, 2013, 06:56:49 am
by jmester
16 Replies
1004 Views
Last post April 11, 2014, 07:03:51 am
by Tractorsaw1
111 Replies
1298 Views
Last post September 27, 2015, 09:41:29 pm
by 3000 FPS
2 Replies
180 Views
Last post March 20, 2015, 10:16:41 pm
by 3000 FPS
Poulan 3450 54cc 60cc

Started by Cut4fun « 1 2 3 4 5 » Poulan

43 Replies
720 Views
Last post November 02, 2015, 10:59:12 am
by Cut4fun .
2 Replies
137 Views
Last post February 28, 2018, 01:25:07 pm
by Cut4fun .
0 Replies
100 Views
Last post August 31, 2018, 06:26:35 pm
by Cut4fun .
0 Replies
21 Views
Last post February 10, 2020, 08:33:25 am
by Cut4fun .