Author Topic: Poulan 3750 badboy 380 60cc  (Read 7778 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21878
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3750 badboy 380 60cc
« Reply #80 on: February 17, 2013, 07:26:23 pm »
Where and who?
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4460
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Poulan 3750 badboy 380 60cc
« Reply #81 on: February 17, 2013, 07:41:55 pm »
Oh that is the poor ole 3750 that some dufus put a bow on.   It is now mine with the self portrait there, and the saw is going to get the royal treatment including getting rid of that ugly gash from the bow.   I always knew one day I would be welding on that saw.    ;D
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21878
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3750 badboy 380 60cc
« Reply #82 on: February 17, 2013, 07:43:35 pm »
Oh that is the poor ole 3750 that some dufus put a bow on.   It is now mine with the self portrait there, and the saw is going to get the royal treatment including getting rid of that ugly gash from the bow.   I always knew one day I would be welding on that saw.    ;D

Well heck that is cool. I seen it on block, but didnt know who got it.   8)

Before and after pics of the work pleasssssssse.  ;D
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Poulan 3750 badboy 380 60cc
« Reply #83 on: February 18, 2013, 02:18:49 am »
Oh that is the poor ole 3750 that some dufus put a bow on.   It is now mine with the self portrait there, and the saw is going to get the royal treatment including getting rid of that ugly gash from the bow.   I always knew one day I would be welding on that saw.    ;D

Well heck that is cool. I seen it on block, but didnt know who got it.   8)

Before and after pics of the work pleasssssssse.  ;D

+1.  I saw it for sale...................wondered who got it.............and want to see the work done! ;D
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline ms460woodchuck

  • 5 cube
  • ***
  • Posts: 101
  • Karma: 14
Re: Poulan 3750 badboy 380 60cc
« Reply #84 on: February 18, 2013, 10:14:09 am »
 I am the one that got it from Kevin on the trade and the one that sold it on the bay...I would really like to see the pics myself when the welding is done.

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4460
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Poulan 3750 badboy 380 60cc
« Reply #85 on: February 18, 2013, 12:56:54 pm »
Alright not a problem guys.    I already have new cranks seals, piston and ring, and new bearings If I need them.   Now it is just a matter of time.    I have two weeks to retirement and then will be going full bore.
PP 505, 475, 445.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: Poulan 3750 badboy 380 60cc
« Reply #86 on: February 18, 2013, 01:26:37 pm »
I'm going to split  3750 stuff off and put it in the 3750 thread.    ;)



Your going to want a new piston kit. That piston was really really  :-X hurt when I loaned it out and the guy ran it without the impulse line attached and on half choke.

The ring was new oem, but took some scuffs when loaned out.

REDNECK Saw Repair

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4460
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Poulan 3750 badboy 380 60cc
« Reply #87 on: February 18, 2013, 06:47:08 pm »
Yes I already have a new piston and ring for it.   I had anticipated that from the ebay listing and also from past posting about the saw.   Thanks.
PP 505, 475, 445.

Offline fastleo151

  • 5 cube
  • ***
  • Posts: 103
  • Karma: 8
Re: Poulan 3750 badboy 380 60cc
« Reply #88 on: March 07, 2013, 06:19:21 am »
I can seem to find a part number for the brake band for my 3750. My IPL doesn't even show it. Does anyone have the number or a used brake band they would part with?

Andy

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21878
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3750 badboy 380 60cc
« Reply #89 on: March 07, 2013, 06:29:01 am »
I can seem to find a part number for the brake band for my 3750. My IPL doesn't even show it. Does anyone have the number or a used brake band they would part with?

Andy

Look at the poulan pro 330. Should be the same and being newer saw maybe that IPL will show it for you.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
66 Replies
2120 Views
Last post March 03, 2020, 10:13:18 am
by Cut4fun .
Poulan 3450 60cc

Started by Cut4fun . « 1 2 ... 6 7 » Poulan

66 Replies
1378 Views
Last post February 08, 2018, 07:01:11 pm
by 3000 FPS
6 Replies
360 Views
Last post October 18, 2013, 06:56:49 am
by jmester
16 Replies
1001 Views
Last post April 11, 2014, 07:03:51 am
by Tractorsaw1
111 Replies
1292 Views
Last post September 27, 2015, 09:41:29 pm
by 3000 FPS
2 Replies
179 Views
Last post March 20, 2015, 10:16:41 pm
by 3000 FPS
Poulan 3450 54cc 60cc

Started by Cut4fun « 1 2 3 4 5 » Poulan

43 Replies
717 Views
Last post November 02, 2015, 10:59:12 am
by Cut4fun .
2 Replies
135 Views
Last post February 28, 2018, 01:25:07 pm
by Cut4fun .
0 Replies
97 Views
Last post August 31, 2018, 06:26:35 pm
by Cut4fun .
0 Replies
20 Views
Last post February 10, 2020, 08:33:25 am
by Cut4fun .