Author Topic: Poulan 3750 badboy 380 60cc  (Read 7768 times)

0 Members and 1 Guest are viewing this topic.

Offline OhioGregg

  • 4 cube
  • **
  • Posts: 48
  • Karma: 10
Re: Poulan 3750 badboy 380 60cc
« Reply #20 on: November 11, 2011, 01:59:43 pm »
Kevin, As far as I know, they are the same as the 3750, just different colors. ;D
They have the Italian made Gilardoni cyl. 60cc



Gregg,


Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4044
  • Karma: 159
  • OHIO REDNECK
Re: Poulan 3750 badboy 380 60cc
« Reply #21 on: November 11, 2011, 02:38:50 pm »
Sweet. Does this saw have the dated sticker on the back right side of tank still. What year is on it?

I take it these were built same time frame as smaller saw brother 330?

Hmmmmm pull this 3750 topend and put on 330. Nah want real 380 super now.

Now I wonder can the 365 topends be swapped to the 330 3750 380 with bigger carb and intake? Does the cylinders from 365 bolt up. I never checked.

Now I wonder who bought that super clean looking poulan 3000 for $65 before I got home today.   :'( :'( :'(  Hope it was one of you poulan guys.  Markkkkkkkkkkkkkkk?
REDNECK Saw Repair

Offline OhioGregg

  • 4 cube
  • **
  • Posts: 48
  • Karma: 10
Re: Poulan 3750 badboy 380 60cc
« Reply #22 on: November 11, 2011, 04:12:32 pm »
Mine has a date of 1997 on it. I think the 330 can be upraded to the 380, same for 3450 to 3750. I think the 335 & 365 were a little different. They were also 54 & 60 cc'.  Little different design I do believe. Mark knows these pretty well.

Gregg,

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3750 badboy 380 60cc
« Reply #23 on: November 11, 2011, 07:42:46 pm »
The reason I ask this. The gasket kit that came for 3750 had 3 different base gaskets and 3 different muffler gaskets.
1 base and muffler gasket fit 3750
1 muffler gasket fit 365
1muffler gasket fit 3000
2 other base gaskets fit, I dont know yet.

I was just wondering if the bolt pattern was different on the 365 60cc by just a hair. I never measured them. Heck I just had the 365 in my hands tonight while I was adjusting carb and sending  the craftsman 3000 out for the woods this weekend.
REDNECK Saw Repair Getter Done

Offline Modifiedmark

  • 5 cube
  • ***
  • Posts: 80
  • Karma: 2
Re: Poulan 3750 badboy 380 60cc
« Reply #24 on: November 13, 2011, 10:34:09 am »
Kevin, I'm not sure if the 365 cyl will bolt onto the 380 or not. The part # for the 3750 and 380 is different then the 365/3500/3600. It may bolt on the case the same but there are probably some other differences, like intake etc.

Yep, I got the $65 3000. You should have been faster.  ;D Really I just found it on my phone while on break at work, called them and bought it.

I have a uneasy feeling about it though, we will see when it gets here.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3750 badboy 380 60cc
« Reply #25 on: November 13, 2011, 11:07:28 am »

Yep, I got the $65 3000. You should have been faster.  ;D Really I just found it on my phone while on break at work, called them and bought it.

I have a uneasy feeling about it though, we will see when it gets here.

It looked to run good in a video I watched in the morning of it.  I had put in in my cart before leaving but it wouldnt check me out on the site it was on. Check out wanted me to do local pick up, not happening.
So I went onto work and when I got home it was sold. I was just hoping it was one of you guys that was looking for a clean 3000.  I needed it like a hole in the head, I would imagine the same can be said for most of us. LOL


REDNECK Saw Repair Getter Done

Offline Modifiedmark

  • 5 cube
  • ***
  • Posts: 80
  • Karma: 2
Re: Poulan 3750 badboy 380 60cc
« Reply #26 on: November 13, 2011, 02:05:18 pm »
Yeah I needed it. LOL

Like I said I was looking at it on my PITA phone so no online buying and just called them. If you would have I would have been too late.  :D

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: Poulan 3750 badboy 380 60cc
« Reply #27 on: November 13, 2011, 06:25:04 pm »
I put the 3000 in my watch list too.  Went to their website pulled it up to buy it.  Nature called when I got back it was gone.  Hope it runs as good as it looked.  I'll have to be faster next time ha ha!  Then I thought about bills XXXX.  Glad a Poulan lover got it.  It will have a good home.
Shep

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3750 badboy 380 60cc
« Reply #28 on: November 14, 2011, 12:25:22 pm »
Have any of you guys compared a PP365 or 3500 with smaller intake and carb to the PP380 or 3750 with bigger intake or carb? or even a PP330 54cc to the first 2?

  I am going to take the PP365, 3500 60cc and my 3750 60cc and PP330 54cc and compere them in the future with 20" bar buried with same chain on all 3/8 050 in hardwood to see if there is a difference. I am thinking besides the smaller carb there is some port timing difference in them.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 3750 badboy 380 60cc
« Reply #29 on: November 16, 2011, 06:36:39 am »
Well the ring may have been good enough to hold 150psi cold. But once started and warm I was getting blow by. So 3750 #3 is tore back down waiting new ring. 
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
66 Replies
2119 Views
Last post March 03, 2020, 10:13:18 am
by Cut4fun .
Poulan 3450 60cc

Started by Cut4fun . « 1 2 ... 6 7 » Poulan

66 Replies
1378 Views
Last post February 08, 2018, 07:01:11 pm
by 3000 FPS
6 Replies
360 Views
Last post October 18, 2013, 06:56:49 am
by jmester
16 Replies
1001 Views
Last post April 11, 2014, 07:03:51 am
by Tractorsaw1
111 Replies
1291 Views
Last post September 27, 2015, 09:41:29 pm
by 3000 FPS
2 Replies
179 Views
Last post March 20, 2015, 10:16:41 pm
by 3000 FPS
Poulan 3450 54cc 60cc

Started by Cut4fun « 1 2 3 4 5 » Poulan

43 Replies
717 Views
Last post November 02, 2015, 10:59:12 am
by Cut4fun .
2 Replies
135 Views
Last post February 28, 2018, 01:25:07 pm
by Cut4fun .
0 Replies
97 Views
Last post August 31, 2018, 06:26:35 pm
by Cut4fun .
0 Replies
20 Views
Last post February 10, 2020, 08:33:25 am
by Cut4fun .