Author Topic: Poulan 380  (Read 2137 times)

0 Members and 0 Guests are viewing this topic.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4471
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan 380
« Reply #30 on: April 27, 2015, 09:02:52 pm »
Looks good Aaron and I think the repair for the oil tank will hold fine.   I really like the 60cc series saws like this that Poulan makes.
The 380 I take it compares to a 3750. 

Sounds good by the way and looks like it has good throttle response.
PP 505, 475, 445.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Poulan 380
« Reply #31 on: April 27, 2015, 09:45:02 pm »
The PP380 is the gold cousin to the green 3750 like the PP330 is to the 3450.  This PP Super 380 has the 60cc Gilardoni top end as well as the HDA137 carb and the heavy duty 3 shoe clutch (instead of the 2-shoe on the PP330).
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4471
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan 380
« Reply #32 on: April 27, 2015, 09:49:47 pm »
Nice saw.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22076
  • Karma: 548
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 380
« Reply #33 on: February 10, 2017, 11:56:49 am »
Found a poulan pro 380 60cc project saw.  Going to have a lot of catching up to do after the winter buys.  :P ::)

Said some issues. Cant remember them off hand.

But as I saw it getting it pics took yesterday.



REDNECK Saw Repair Getter Done
Like Like x 2 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22076
  • Karma: 548
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 380
« Reply #34 on: February 17, 2017, 05:15:45 pm »
The PP380 arrived today.  At one time it was a NY DOT saw and confirmed by the seller.  Engraved in foot plate area.

Quick look see. Seen blue rtv sealer for base gasket.  Impulse line ran through the cold air plug on right side of carb back area.   Some marks on piston top of ring.  All and all pleased but will need a good go through.



REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4471
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan 380
« Reply #35 on: February 17, 2017, 05:48:11 pm »
Sounds good.    That is the one saw in the 60cc range and of that particular Poulan design that I do not have.    They are around but just not a lot of them.    I think I have seen more Tim Allen 3750's than I have of the 380 super.   
PP 505, 475, 445.
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22076
  • Karma: 548
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 380
« Reply #36 on: February 17, 2017, 06:38:30 pm »
Sounds good.    That is the one saw in the 60cc range and of that particular Poulan design that I do not have.    They are around but just not a lot of them.    I think I have seen more Tim Allen 3750's than I have of the 380 super.   

Roger I was only going to fix to sell local.   IF you want to do the fixing etc for your collection. Just let me know.

Missing some fasteners, muffler bolt but checked cylinder threads and they are there and good.

Wonder if it has 137 or 164 carb  :-\    Has mesh air filter.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22076
  • Karma: 548
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 380
« Reply #37 on: February 18, 2017, 09:50:15 am »
@3000 FPS  I been watching this semi local one.  Folks bidding stupid money IMO with 2 days to go LOL. Can tell income tax as arrived IMO   http://www.ebay.com/itm/PP380-Super-Chainsaw-Reconditioned-With-90-Day-Warranty-Highest-Bidder-Gets-It-/142274827659?hash=item21203d958b:g:~jMAAOSwtfhYnjEz
REDNECK Saw Repair Getter Done

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4471
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan 380
« Reply #38 on: February 18, 2017, 12:54:08 pm »
I saw that also and had been watching.   You are right some stupid money there.    Heck I think I bought a Husky 272 in good working condition for that kind of money.   I mean I like my Poulans but not that much.
PP 505, 475, 445.
Agree Agree x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22076
  • Karma: 548
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 380
« Reply #39 on: February 18, 2017, 01:03:21 pm »
Sounds good.    That is the one saw in the 60cc range and of that particular Poulan design that I do not have.    They are around but just not a lot of them.    I think I have seen more Tim Allen 3750's than I have of the 380 super.   

Roger I was only going to fix to sell local.   IF you want to do the fixing etc for your collection. Just let me know.

Missing some fasteners, muffler bolt but checked cylinder threads and they are there and good.

Wonder if it has 137 or 164 carb  :-\    Has mesh air filter.

Looking at IPL for PP 380 only 137 was on list. So unless someone switched the carbs.  ;D
REDNECK Saw Repair Getter Done
Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
555 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1248 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
Poulan Micro

Started by fossil « 1 2 » Poulan

14 Replies
525 Views
Last post May 08, 2020, 06:40:50 am
by Cut4fun .
2 Replies
164 Views
Last post July 04, 2014, 02:27:26 pm
by Eccentric
2 Replies
109 Views
Last post July 26, 2014, 06:52:06 pm
by 3000 FPS
8 Replies
234 Views
Last post August 22, 2014, 02:09:00 pm
by AmericanPsycho
Poulan Pro 56cc

Started by mcbob « 1 2 » Poulan

16 Replies
312 Views
Last post October 10, 2014, 05:02:46 pm
by mcbob
20 Replies
416 Views
Last post December 29, 2014, 11:44:45 pm
by 3000 FPS
39 Replies
737 Views
Last post July 01, 2020, 08:03:22 am
by Cut4fun
Poulan S25DA Bow

Started by Cut4fun . « 1 2 3 » Poulan

23 Replies
367 Views
Last post January 05, 2015, 02:51:31 am
by Eccentric