« previous next »
Pages: 1 ... 5 6 7 8 9 [10] 11 12 13 14 15 ... 19   Go Down

Author Topic: Poulan 4000  (Read 8886 times)

0 Members and 0 Guests are viewing this topic.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4694
  • Karma: 320
  • Location: Carpenter, Wyoming
Re: Poulan 4000
« Reply #90 on: February 04, 2015, 01:27:28 pm »
The 3400 run around 125 to 135 psi.
The 3700 will run around 150 to 160 psi
The 4000 is the same as the 3700 they both have two thin rings and the only real difference is in
the bore size as far as compression goes.

I have seen the exception posted where someone got up to 175 psi on the 3700 and 4000 models.
Logged
PP 505, 475, 445.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4616
  • Karma: 216
  • OHIO REDNECK
Re: Poulan 4000
« Reply #91 on: February 04, 2015, 01:42:06 pm »
Thank you................


I'll show this for now. Looks clean.  Tree guy owns and just sets as a back up I guess.

Only pic I could get.


OhioGregg Poulan psi

I'm done testing saw compression for a while. After about six of them, the fun wore off. :msp_wink: I didn't do all of them, but wanted to get an idea. Stephen, yours saws are really putting out compared to mine.

5200 -- 160 lbs. PP 375 -- 140 lbs. PP Super 380 --- 170 lbs.
5200 -- 165 lbs. 3700 --- 130 lbs. 245A ----------- 140 lbs.
4200 -- 165 lbs. 3700 --- 140 lbs. 306A ----------- 135 lbs.
4000 -- 150 lbs. 3400 --- 130 lbs. 306A ----------- 90 lbs.
4000 -- 150 lbs. 3400 --- 125 lbs. S25DA --------- 135 lbs.
4000 -- 150 lbs. 3400 --- 120 lbs. 385XP ---------- 150 lbs.
4000 -- 140 lbs.
4000 -- 135 lbs.





Logged

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4694
  • Karma: 320
  • Location: Carpenter, Wyoming
Re: Poulan 4000
« Reply #92 on: February 04, 2015, 01:44:37 pm »
Nice looking saw the compression is good.   Looks like a winner.
Logged
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23510
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 4000
« Reply #93 on: February 04, 2015, 01:48:20 pm »
Quote from: 3000 FPS on February 04, 2015, 01:44:37 pm
Nice looking saw the compression is good.   Looks like a winner.

But not what I want.  :'( :'( :'(  The search continues.   

Logged

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4694
  • Karma: 320
  • Location: Carpenter, Wyoming
Re: Poulan 4000
« Reply #94 on: February 04, 2015, 01:50:27 pm »
The search is what makes it fun.   
Logged
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23510
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 4000
« Reply #95 on: February 04, 2015, 02:09:38 pm »
Quote from: 3000 FPS on February 04, 2015, 01:50:27 pm
The search is what makes it fun.   

It is to me.

I  still keep my eyes open for another Red Predator 335  too and another 445.   I wish now I would have just paid the freaking $90 for the 445 topend now.  Hindsight.
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23510
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 4000
« Reply #96 on: February 10, 2015, 01:46:48 pm »
I  ordered a rebuild kit for a poulan 4000 carb I didnt end up being able to buy  do to a thief.  So I wonder what else this kit fits.
Logged

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Poulan 4000
« Reply #97 on: February 10, 2015, 05:24:42 pm »
Quote from: Cut4fun_ on February 10, 2015, 01:46:48 pm
I  ordered a rebuild kit for a poulan 4000 carb I didnt end up being able to buy  do to a thief.  So I wonder what else this kit fits.
What???
Logged
Ron

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23510
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 4000
« Reply #98 on: February 10, 2015, 08:30:00 pm »
Quote from: man of stihl on February 10, 2015, 05:24:42 pm
Quote from: Cut4fun_ on February 10, 2015, 01:46:48 pm
I  ordered a rebuild kit for a poulan 4000 carb I didnt end up being able to buy  do to a thief.  So I wonder what else this kit fits.
What???

Somebody stole the guys 4 huskys and stihls and climbing gear, only left the poulan. He does firewood and tree work and only saw for now. 
Logged

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Poulan 4000
« Reply #99 on: February 10, 2015, 08:43:18 pm »
Oh that sucks.
Logged
Ron
Pages: 1 ... 5 6 7 8 9 [10] 11 12 13 14 15 ... 19   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
1 Replies
533 Views 		Last post November 27, 2011, 02:52:55 am
by Roanoker494
1 Replies
376 Views 		Last post September 11, 2012, 10:24:23 am
by Cut4fun
6 Replies
605 Views 		Last post July 28, 2019, 12:23:26 pm
by countryhog
0 Replies
182 Views 		Last post December 22, 2014, 01:22:11 pm
by Cut4fun .
3 Replies
264 Views 		Last post July 17, 2017, 04:40:15 pm
by dcook22
23 Replies
1776 Views 		Last post June 17, 2021, 07:09:31 am
by Cut4fun .
0 Replies
317 Views 		Last post May 01, 2020, 06:52:38 pm
by Cut4fun .
2 Replies
140 Views 		Last post January 27, 2022, 01:12:40 pm
by Cut4fun .
0 Replies
84 Views 		Last post March 17, 2022, 10:33:52 am
by Cut4fun .
0 Replies
121 Views 		Last post November 22, 2022, 04:40:36 pm
by Cut4fun .