Author Topic: Poulan 5400 8500 5200  (Read 2861 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22011
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 5400 8500 5200
« Reply #30 on: September 15, 2013, 08:05:28 pm »
Yep and Nope. It sure could use one. Thats why I put the 460 rescue handle on it.   :o
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Poulan 5400 8500 5200
« Reply #31 on: September 15, 2013, 08:22:49 pm »
Yep and Nope. It sure could use one. Thats why I put the 460 rescue handle on it.   :o

I figured.  Won't work for him unfortunately.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline doreadeal

  • 5 cube
  • ***
  • Posts: 83
  • Karma: 3
Re: Poulan 5400 8500 5200
« Reply #32 on: September 17, 2013, 06:49:43 am »
Longer stroke always increases torque, no matter what type of egine your talking about. It also tends to limit rpm and high rpm output. Over square motors (larger bore then stroke) are the opposite. They tend to like high rpm and put power out better up there.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22011
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 5400 8500 5200
« Reply #33 on: February 01, 2014, 09:56:42 pm »
Come across a poulan 5200. Just a non-runner right now.

Guy wants me to make a offer plus shipping to me. Their not worth much to me.

 What would you say a fair price is on a 5200 non runner suppose to be new p and p and c looks like new I guess?  Recoil unwound so cant tell much more. Bent full wrap I think.

REDNECK Saw Repair Getter Done

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4468
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan 5400 8500 5200
« Reply #34 on: February 01, 2014, 10:36:14 pm »
If it were me and I went and looked at that saw, I would not go over 100.00.    Which means if you can get it for less then by all means go for it.      To many unknowns about it right now and it does look well used.
Come across a poulan 5200. Just a non-runner right now.

Guy wants me to make a offer plus shipping to me. Their not worth much to me.

 What would you say a fair price is on a 5200 non runner suppose to be new p and p and c looks like new I guess?  Recoil unwound so cant tell much more. Bent full wrap I think.


PP 505, 475, 445.
Agree Agree x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22011
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 5400 8500 5200
« Reply #35 on: February 01, 2014, 10:39:39 pm »
I was thinking $100 max plus shipping.  But I dont think I could even offer that much.
REDNECK Saw Repair Getter Done

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: Poulan 5400 8500 5200
« Reply #36 on: February 02, 2014, 08:28:02 am »
That doesn't seem like a bad deal at $100. Any more than that is too much to me. I want one to have one good poulan for the collection to go with my modern work saws just to get out and run from time to time.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4084
  • Karma: 165
  • OHIO REDNECK
Re: Poulan 5400 8500 5200
« Reply #37 on: March 26, 2014, 04:37:09 pm »
Just saving these pics another way so they dont get lost.  Also embedded on page 1.

URL=http://s59.photobucket.com/user/doemaster789/media/Partner550/d5200a.jpg.html][img width=800 height=794]http://i59.photobucket.com/albums/g289/doemaster789/Partner550/d5200a.jpg[/img[/URL]
URL=http://s59.photobucket.com/user/doemaster789/media/Partner550/d5200.jpg.html][img width=800 height=794]http://i59.photobucket.com/albums/g289/doemaster789/Partner550/d5200.jpg[/img[/URL]

URL=http://s59.photobucket.com/user/doemaster789/media/Partner550/d5200c.jpg.html][img width=800 height=794]http://i59.photobucket.com/albums/g289/doemaster789/Partner550/d5200c.jpg[/img[/URL]
URL=http://s59.photobucket.com/user/doemaster789/media/Partner550/d5200b.jpg.html][img width=800 height=794]http://i59.photobucket.com/albums/g289/doemaster789/Partner550/d5200b.jpg[/img[/URL]
REDNECK Saw Repair


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22011
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 5400 8500 5200
« Reply #39 on: April 20, 2018, 08:29:20 am »
Willard posted this on the CR-G and felt it needed saved here.

REDNECK Saw Repair Getter Done
Like Like x 3 View List

 

Related Topics

  Subject / Started by Replies Last post
Poulan 8500

Started by Cut4fun « 1 2 ... 6 7 » Poulan

66 Replies
1820 Views
Last post November 15, 2018, 06:20:30 pm
by Cut4fun .
6 Replies
400 Views
Last post February 10, 2013, 10:32:59 pm
by ms460woodchuck
28 Replies
540 Views
Last post October 25, 2018, 02:44:19 am
by Eccentric
13 Replies
531 Views
Last post June 01, 2015, 03:20:32 pm
by 660magnum
4 Replies
305 Views
Last post August 09, 2015, 10:44:55 pm
by 3000 FPS
3 Replies
287 Views
Last post February 21, 2017, 07:52:38 am
by mowertech
4 Replies
123 Views
Last post October 02, 2017, 11:17:19 am
by fossil
Poulan 5400

Started by Cut4fun . « 1 2 » Poulan

16 Replies
372 Views
Last post January 23, 2020, 08:44:42 am
by Cut4fun .
0 Replies
95 Views
Last post September 28, 2018, 02:30:12 pm
by Cut4fun .
0 Replies
75 Views
Last post February 08, 2019, 10:36:43 am
by Cut4fun