Author Topic: Poulan 5400 8500 5200  (Read 2302 times)

0 Members and 1 Guest are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21039
  • Karma: 468
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 5400 8500 5200
« Reply #50 on: January 15, 2019, 04:33:45 pm »
poulan 5400 cylinder and poulan 8500 cylinder. 

To me appears the 85 fins are angled shorter.

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21039
  • Karma: 468
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 5400 8500 5200
« Reply #51 on: January 16, 2019, 03:18:16 pm »
The nos poulan 8500 cylinder I showed is spoke for even though not in my hands yet. Hope dang usps dont lose this one.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21039
  • Karma: 468
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 5400 8500 5200
« Reply #52 on: January 17, 2019, 11:01:05 am »
Guy in my crg asking for info on these. I knew what they were. Sticker number is wrong on big one.

Trying to get him to measure bore and see if I can buy it too.

REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21039
  • Karma: 468
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 5400 8500 5200
« Reply #53 on: January 19, 2019, 02:32:23 pm »
poulan 5400 cylinder on left and poulan 8500 cylinder on right.

REDNECK Saw Repair Getter Done

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4313
  • Karma: 257
  • Location: Carpenter, Wyoming
Re: Poulan 5400 8500 5200
« Reply #54 on: January 19, 2019, 10:28:12 pm »
Do the transfer ports look bigger on the 5400.    Not sure from the photo.   
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21039
  • Karma: 468
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 5400 8500 5200
« Reply #55 on: January 20, 2019, 08:20:22 am »
Do the transfer ports look bigger on the 5400.    Not sure from the photo.   

Not my pics. Just some I have requested for my search on their differences. 
I had thought the 85 looked bigger trans when I first seen them. But betting same. Just a guess.
REDNECK Saw Repair Getter Done

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3906
  • Karma: 141
  • OHIO REDNECK
Re: Poulan 5400 8500 5200
« Reply #56 on: January 22, 2019, 06:10:49 pm »
Will be measuring bore later to make sure it is a NOS poulan 8500 cylinder bore.

Is spoke for by several folks already so will start at the top. Pretty sure #1 said mark SOLD ;)

Many thanks to the person that sold it to me. Thinking this one will fit the whole series. The 52 54 have to be trimmed up and grind on to make work on a 85. Just what I have found researching them.

REDNECK Saw Repair
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21039
  • Karma: 468
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 5400 8500 5200
« Reply #57 on: January 23, 2019, 11:24:29 am »
With my cheap calibers I get 2.058 which tells me 85cc. Mikes site shows 2.066 85cc. 77cc was under 2 at 1.957

Looks like the chance paid off for someone.
REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21039
  • Karma: 468
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 5400 8500 5200
« Reply #58 on: March 03, 2019, 01:39:59 pm »
Cant recall where it was at now. But someone had ask me about full wraps for the older cv big saws.    If your here send me PM.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21039
  • Karma: 468
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 5400 8500 5200
« Reply #59 on: March 04, 2019, 08:11:35 am »
Pic of 3 NOS poulan full wrap 5200 5400 8500 handle

My question being I dont know these well.  I know the 5400 half was like this rubber cover and the 8500 was foam cover deal.

So do these full wraps fit all of the gen 1 2 3 series of the saws?


REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
Poulan 8500

Started by Cut4fun « 1 2 ... 6 7 » Poulan

66 Replies
1592 Views
Last post November 15, 2018, 06:20:30 pm
by Cut4fun .
6 Replies
369 Views
Last post February 10, 2013, 10:32:59 pm
by ms460woodchuck
28 Replies
442 Views
Last post October 25, 2018, 02:44:19 am
by Eccentric
13 Replies
355 Views
Last post June 01, 2015, 03:20:32 pm
by 660magnum
4 Replies
229 Views
Last post August 09, 2015, 10:44:55 pm
by 3000 FPS
3 Replies
196 Views
Last post February 21, 2017, 07:52:38 am
by mowertech
4 Replies
93 Views
Last post October 02, 2017, 11:17:19 am
by fossil
Poulan 5400

Started by Cut4fun . « 1 2 » Poulan

15 Replies
228 Views
Last post January 16, 2019, 03:16:48 pm
by Cut4fun .
0 Replies
69 Views
Last post September 28, 2018, 02:30:12 pm
by Cut4fun .
0 Replies
55 Views
Last post February 08, 2019, 10:36:43 am
by Cut4fun