« previous next »
Pages: [1] 2   Go Down

Author Topic: Poulan 9/16 srench bar nuts  (Read 1615 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4616
  • Karma: 216
  • OHIO REDNECK
Poulan 9/16 srench bar nuts
« on: November 23, 2013, 02:50:11 pm »
Was trying to find some extra poulan 9/16 bar nuts with what seems like coarse threads today.   Anyone got a lead on them or part number?  I'm coming up with this  530015251   but want to make sure they are the right ones.

I always just used a 9/16" ratchet, never seen a swrench in the 9/16 or maybe I am just not paying attention.  530031146
Logged

Share on Facebook Share on Twitter

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Poulan 9/16 swrench bar nuts
« Reply #1 on: November 23, 2013, 02:58:44 pm »
You try flange nuts from the hardware?
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4616
  • Karma: 216
  • OHIO REDNECK
Re: Poulan 9/16 swrench bar nuts
« Reply #2 on: November 23, 2013, 03:00:31 pm »
Quote from: 660magnum on November 23, 2013, 02:58:44 pm
You try flange nuts from the hardware?

Duh on me. Thanks for the idea.    Local Hockler has a great selection and I can usually match up anything in the past.  Totally slipped my mind.
Logged

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2117
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northwestern Wyoming
Re: Poulan 9/16 swrench bar nuts
« Reply #3 on: November 23, 2013, 03:08:52 pm »
Make sure you get the smooth faced flange nuts.  Most hardware store flange nuts are serrated.  They chew the hell out of a magnesium clutch cover.  The Poulan (and some medium sized Homelite) nuts are 5/16-18, with a 9/16" hex.  You'll probably find that most 5/16-18 flange nuts have a 1/2" hex.

As for a 9/16" scrench.......................Oregon still makes/sells them.  They're labeled as being suitable for Echo and Poulan.  19mmx14mm.  Part # 57-006.  They're also the ticket for large frame McCulloch chainsaws, as those also used 9/16" bar nuts (but fine thread 3/8).  Large frame McCullochs use 3/8-24 nuts with a 9/16" hex.

http://www.ebay.com/itm/Oregon-57-006-19-by-14-mm-Chain-Saw-Scrench-/321186288921?pt=LH_DefaultDomain_0&hash=item4ac831d519

http://www.ebay.com/itm/SCRENCH-19MM-X-14MM-57-006-/390556269395?pt=LH_DefaultDomain_0&hash=item5aeef7bb53



These would work fine on a Poulan...................but I think they have a 1/2" hex.  That combination (5/16-18 with a 1/2" hex) was used on many medium sized Homelites.

http://www.ebay.com/itm/Quarter-Midget-5-16-18-NON-Serrated-Flange-Nuts-40-PK-/320730313747?pt=Race_Car_Parts&hash=item4aad043413&vxp=mtr
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23515
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 9/16 swrench bar nuts
« Reply #4 on: November 23, 2013, 03:16:34 pm »
Very Cool.  Thanks for all the info.

I have a super heavy duty swrench that Al Smith made me for dolmar 166 bar nuts if anyone of you have a use for it.  I have a stock one now and dont need 2.  Thinking 17mm maybe?


I may have that one already.  :P :P :P   http://www.ebay.com/itm/Oregon-57-006-19-by-14-mm-Chain-Saw-Scrench-/321186288921?pt=LH_DefaultDomain_0&hash=item4ac831d519
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Poulan 9/16 swrench bar nuts
« Reply #5 on: November 23, 2013, 03:17:05 pm »
Kevin, the flange nuts I bought for my 372's at the hardware above my house towards town were smooth. Couldn't tell them from Husqvarna.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23515
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 9/16 swrench bar nuts
« Reply #6 on: November 25, 2013, 04:52:39 pm »
I was able to take a sec and check the one I bought for the 166.  It was 17mm and 19mm.  So thanks for the link on the 14mm swrenches.
Logged

Offline fastleo151

  • 5 cube
  • ***
  • Posts: 103
  • Karma: 8
Re: Poulan 9/16 srench bar nuts
« Reply #7 on: November 25, 2013, 09:22:37 pm »
I change mine to 1/2....
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Poulan 9/16 srench bar nuts
« Reply #8 on: November 25, 2013, 09:47:47 pm »
Glenn's has a big assortment of screnches
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23515
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 9/16 srench bar nuts
« Reply #9 on: November 26, 2013, 01:58:29 pm »
Quote from: fastleo151 on November 25, 2013, 09:22:37 pm
I change mine to 1/2....

I tried that, but the new husky bar nuts wouldnt go on the poulan bar stud threads.   ???   I didnt check the thread difference of the studs, but figured something was up with that.   
I just said freak it and put the 9/16 back on.
Logged
Pages: [1] 2   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
Poulan Pro 295

Started by rms61moparman « 1 2 ... 9 10 » Poulan

94 Replies
5547 Views 		Last post October 22, 2017, 10:54:42 pm
by Cut4fun .
Poulan 445

Started by 3000 FPS « 1 2 ... 19 20 » Poulan

192 Replies
9121 Views 		Last post August 12, 2021, 01:22:00 pm
by Cut4fun
7 Replies
944 Views 		Last post April 13, 2014, 08:11:42 pm
by Cut4fun .
0 Replies
297 Views 		Last post October 02, 2012, 11:36:18 am
by mweba
Poulan 395

Started by 3000 FPS « 1 2 3 » Poulan

23 Replies
1926 Views 		Last post January 05, 2013, 09:09:29 pm
by 3000 FPS
4 Replies
1053 Views 		Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
2844 Views 		Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
Poulan 335

Started by 3000 FPS « 1 2 3 4 5 » Poulan

47 Replies
3615 Views 		Last post November 03, 2022, 08:55:06 am
by Cut4fun
3 Replies
829 Views 		Last post September 15, 2013, 10:56:36 pm
by sharkey
15 Replies
1374 Views 		Last post December 07, 2013, 03:39:46 pm
by Arrow13