Author Topic: Poulan air filters 335 305 3000 3300 2700 2800 285 etc  (Read 1866 times)

0 Members and 0 Guests are viewing this topic.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4468
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan air filters 335 305 3000 3300 etc
« Reply #30 on: January 13, 2014, 08:10:30 pm »
I made the same offer also.  If any left over just let me know I will take care of it.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22011
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan air filters 335 305 3000 3300 etc
« Reply #31 on: January 13, 2014, 08:31:56 pm »
Long as they are taken care of is all I ask. This guy did us all a favor.  Roger or Mike get them after all is said and done then on what is left.
If something happens, I'll be the last resort.
REDNECK Saw Repair Getter Done

Offline rms61moparman

  • 6 cube
  • ****
  • Posts: 270
  • Karma: 37
  • Location: Franklinton, Kentucky
Re: Poulan air filters 335 305 3000 3300 etc
« Reply #32 on: January 14, 2014, 07:52:47 pm »


I guarantee you won't get stuck with them!


Mike

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4468
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan air filters 335 305 3000 3300 etc
« Reply #33 on: January 14, 2014, 08:17:02 pm »


I guarantee you won't get stuck with them!


Mike


I have about 6 saws that use those filters.
PP 505, 475, 445.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Poulan air filters 335 305 3000 3300 etc
« Reply #34 on: January 14, 2014, 08:19:26 pm »
Do they have other Poulan air filters at that hardware store?  I could use a spare 530023046 or two for my 306/245 saws...............and a couple spare 530010247 filters for the big countervibes.


Heck while I'm throwing out Poulan numbers to look for.........................there's 530024224 and 530024225 for the big countervibe saw AV isolators.  Would like to grab a bunch of those at a realistic price.  They're listed for stupid money on feebay now.  There's other numbers too...
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22011
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan air filters 335 305 3000 3300 etc
« Reply #35 on: January 14, 2014, 08:35:01 pm »
That thought had crossed my mind too. Wondering what new old stock that place had on hand.
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Poulan air filters 335 305 3000 3300 etc
« Reply #36 on: January 14, 2014, 08:48:49 pm »
That thought had crossed my mind too. Wondering what new old stock that place had on hand.

Yep.  Crosses my mind every time somebody mentions scoring an old part at some out of the way place.  I could bury the poor fellow in NLA Poulan #'s.  Done it before with other guys that've asked me "anything you want me to look for while I'm there?"..............8)
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline magnumfloyd

  • 4 cube
  • **
  • Posts: 63
  • Karma: 10
  • Location: Millville, NJ
Re: Poulan air filters 335 305 3000 3300 etc
« Reply #37 on: January 18, 2014, 12:27:33 am »
That's basically all they had. There was another local place that had a lot but sold everything not to long ago.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22011
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan air filters 335 305 3000 3300 etc
« Reply #38 on: January 19, 2014, 12:19:01 pm »
Just heard they are all spoken and paid for.   THANKS magnumfloyd  8)  for going out of your way to help these folks out. 




REDNECK Saw Repair Getter Done

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4084
  • Karma: 165
  • OHIO REDNECK
Re: Poulan air filters 335 305 3000 3300 etc
« Reply #39 on: June 02, 2014, 02:56:44 pm »
While working on dads 3300 I noticed it had some flocking missing on the air filter. Which I will try BB redneck fix later on.
Anyhow I ask dad where is the new filter I bought him years ago. He stated hanging up. So I told him to bring it up with him last weekend. Turns out I had bought him a NOS mesh one.

Now my question being that I have a NOS 530010855   mesh air filter and NOS 530010892  flocked air filter. Which would be better for him? Which one would you think would be better trapping fines?

I never paid any attention to them or any filtering difference etc in the past.  I am leaning toward putting flocked back on his saw.
REDNECK Saw Repair

 

Related Topics

  Subject / Started by Replies Last post
3 Replies
351 Views
Last post February 03, 2013, 06:33:10 pm
by 660magnum
31 Replies
1443 Views
Last post June 29, 2016, 08:15:33 pm
by countryhog
Poulan 2800

Started by brokenbudget « 1 2 ... 6 7 » Poulan

61 Replies
1189 Views
Last post June 07, 2020, 02:29:33 pm
by Cut4fun .
2 Replies
164 Views
Last post September 13, 2013, 02:57:45 pm
by KilliansRedLeo
Poulan 2700

Started by Cut4fun . « 1 2 3 4 » Poulan

38 Replies
1124 Views
Last post July 16, 2016, 10:02:38 pm
by leec
18 Replies
423 Views
Last post January 25, 2014, 08:03:36 am
by The Ripper
1 Replies
203 Views
Last post April 11, 2014, 10:55:57 pm
by Cut4fun .
3 Replies
159 Views
Last post November 08, 2014, 08:11:47 pm
by Cut4fun .
111 Replies
1307 Views
Last post September 27, 2015, 09:41:29 pm
by 3000 FPS
2 Replies
183 Views
Last post September 28, 2015, 12:40:53 pm
by Cut4fun .