Author Topic: Poulan carbs intakes seals etc info  (Read 367 times)

0 Members and 0 Guests are viewing this topic.

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4458
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Poulan carbs intakes seals etc info
« Reply #30 on: June 26, 2017, 11:40:08 am »
Awesome

If you would like to see your build of this saw while our doing it. Going to be a work or a gtg race saw?
I'm doing 2 , one will be a hot woods port ,for work... other a gtg saw ..... and some work I hope

You will have to do a video.
PP 505, 475, 445.

Online Termitebuffet

  • 4 cube
  • **
  • Posts: 38
  • Karma: 7
Re: Poulan carbs intakes seals etc info
« Reply #31 on: June 30, 2017, 04:23:34 pm »
Awesome

If you would like to see your build of this saw while our doing it. Going to be a work or a gtg race saw?
I'm doing 2 , one will be a hot woods port ,for work... other a gtg saw ..... and some work I hope

You will have to do a video.
I will let me see if 2800 vid will load...brb

Online Termitebuffet

  • 4 cube
  • **
  • Posts: 38
  • Karma: 7
Re: Poulan carbs intakes seals etc info
« Reply #32 on: June 30, 2017, 04:27:39 pm »
https://youtu.be/fh4bVM1_-L8

Just some tweaks on a 2800 wif a 3300 fat ring piston ,aluminum bore...
Like Like x 1 View List

Online Termitebuffet

  • 4 cube
  • **
  • Posts: 38
  • Karma: 7
Winner Winner x 1 View List

Online Termitebuffet

  • 4 cube
  • **
  • Posts: 38
  • Karma: 7
Re: Poulan carbs intakes seals etc info
« Reply #34 on: June 30, 2017, 04:29:17 pm »
https://youtu.be/fh4bVM1_-L8

Just some tweaks on a 2800 wif a 3300 fat ring piston ,aluminum bore...
Wrong video dummy .....lol
Funny Funny x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan carbs intakes seals etc info
« Reply #35 on: July 01, 2017, 08:45:55 am »
Dang what do you have the 2800 up to cc wise? stock 46cc or 49cc  54cc now?   small or big set up on this one?

Just seen info 54cc 3300 below video.

Looks real nice in the cuts.   8)
REDNECK Saw Repair Getter Done

Online Termitebuffet

  • 4 cube
  • **
  • Posts: 38
  • Karma: 7
Re: Poulan carbs intakes seals etc info
« Reply #36 on: July 01, 2017, 01:26:23 pm »
Dang what do you have the 2800 up to cc wise? stock 46cc or 49cc  54cc now?   small or big set up on this one?

Just seen info 54cc 3300 below video.

Looks real nice in the cuts.   8)
I was told 2800 thru 3300 cylinder would bolt on , umm the cylinder of this 3.3 craftsman, I had to clearance the case for the piston to clear at bdc

Online Termitebuffet

  • 4 cube
  • **
  • Posts: 38
  • Karma: 7
Re: Poulan carbs intakes seals etc info
« Reply #37 on: July 01, 2017, 01:27:06 pm »
Dang what do you have the 2800 up to cc wise? stock 46cc or 49cc  54cc now?   small or big set up on this one?

Just seen info 54cc 3300 below video.

Looks real nice in the cuts.   8)
It's the small bolt pattern

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan carbs intakes seals etc info
« Reply #38 on: July 01, 2017, 01:41:53 pm »
Dang what do you have the 2800 up to cc wise? stock 46cc or 49cc  54cc now?   small or big set up on this one?

Just seen info 54cc 3300 below video.

Looks real nice in the cuts.   8)
It's the small bolt pattern

I meant carb intake set ups.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan carbs intakes seals etc info
« Reply #39 on: July 01, 2017, 01:45:24 pm »
Dang what do you have the 2800 up to cc wise? stock 46cc or 49cc  54cc now?   small or big set up on this one?

Just seen info 54cc 3300 below video.

Looks real nice in the cuts.   8)
I was told 2800 thru 3300 cylinder would bolt on , umm the cylinder of this 3.3 craftsman, I had to clearance the case for the piston to clear at bdc

Grey 3.3 with bare bore like the 3300?   I would have guessed bolt on too. 

Chrome bore 335 54cc with thin rings that are NLA so make sure rings are good or you will have to use a 330 3450 piston with thick ring.
REDNECK Saw Repair Getter Done