Author Topic: Poulan carbs intakes seals etc info  (Read 367 times)

0 Members and 0 Guests are viewing this topic.

Online Termitebuffet

  • 4 cube
  • **
  • Posts: 38
  • Karma: 7
Re: Poulan carbs intakes seals etc info
« Reply #40 on: July 01, 2017, 02:35:54 pm »
Dang what do you have the 2800 up to cc wise? stock 46cc or 49cc  54cc now?   small or big set up on this one?

Just seen info 54cc 3300 below video.

Looks real nice in the cuts.   8)
It's the small bolt pattern

I meant carb intake set ups.
Still just the little carb...
Informative Informative x 1 View List

Online Termitebuffet

  • 4 cube
  • **
  • Posts: 38
  • Karma: 7
Re: Poulan carbs intakes seals etc info
« Reply #41 on: July 01, 2017, 02:37:04 pm »
Dang what do you have the 2800 up to cc wise? stock 46cc or 49cc  54cc now?   small or big set up on this one?

Just seen info 54cc 3300 below video.

Looks real nice in the cuts.   8)
I was told 2800 thru 3300 cylinder would bolt on , umm the cylinder of this 3.3 craftsman, I had to clearance the case for the piston to clear at bdc

Grey 3.3 with bare bore like the 3300?   I would have guessed bolt on too. 

Chrome bore 335 54cc with thin rings that are NLA so make sure rings are good or you will have to use a 330 3450 piston with thick ring.
Yes bare bore coated piston....
Useful Useful x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan carbs intakes seals etc info
« Reply #42 on: July 01, 2017, 02:45:37 pm »
Even nicer then. WTG
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan carbs intakes seals etc info
« Reply #43 on: July 01, 2017, 02:50:27 pm »
Split all of this off to make its own thread @Termitebuffet so you know where it is now.
REDNECK Saw Repair Getter Done

Online Termitebuffet

  • 4 cube
  • **
  • Posts: 38
  • Karma: 7
Re: Poulan carbs intakes seals etc info
« Reply #44 on: July 01, 2017, 02:57:41 pm »
Thank you sir

Online Termitebuffet

  • 4 cube
  • **
  • Posts: 38
  • Karma: 7
Re: Poulan carbs intakes seals etc info
« Reply #45 on: July 01, 2017, 03:24:33 pm »
Dang what do you have the 2800 up to cc wise? stock 46cc or 49cc  54cc now?   small or big set up on this one?

Just seen info 54cc 3300 below video.

Looks real nice in the cuts.   8)
Yes sir that's a 20" 325 in the poulan video....

Online Termitebuffet

  • 4 cube
  • **
  • Posts: 38
  • Karma: 7
Re: Poulan carbs intakes seals etc info
« Reply #46 on: July 01, 2017, 03:26:28 pm »
Soon as I can gonna time this setup ,and time the thin ring setup, 

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan carbs intakes seals etc info
« Reply #47 on: July 03, 2017, 03:03:03 pm »
Couldnt remember which carb kit to grab out of the bin for the walbro hda 137     K22-HDA  repair kit.   D22-HDA diaphragm kit

Thread  started on hda 164 137 carb http://chainsawrepair.createaforum.com/poulan/hda-137-164-carbs/msg53305/#msg53305
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan carbs intakes seals etc info
« Reply #48 on: July 03, 2017, 04:13:09 pm »
 :D :P  got lucky it was 1 of the 2 I pulled from bin but wanted to make sure.  8)
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21874
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan carbs intakes seals etc info
« Reply #49 on: July 04, 2017, 10:36:41 am »
Noticed when taking carb apart the diaphragm side with check valve flaps. One flap was partilly covered by the gasket.  This could have been the issue with this carb. 

Wont know till I switch it back in the  3450 again.
REDNECK Saw Repair Getter Done
Old Old x 1 View List