Author Topic: Poulan intake boot  (Read 1184 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22576
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Poulan intake boot
« on: March 16, 2013, 12:11:07 pm »
Grabbed some pics while in the barn.  Poulan intake small and large.

Here is the small poulan intake 530027218 NLA poulan 3000 305 3300 3.0 3.3 335 etc etc below numbers  too. Compared to the poulan 330 380 3450 3750 bigger intake.



REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: Poulan intakes
« Reply #1 on: March 16, 2013, 12:51:31 pm »
 :)thats good info cut!
now how about a comparison pic of the boot opening between the smaller and bigger saws ;)
not many of the bigger saws around here, mostly the 2700-3100's. and i never thought to look when i did have a 330 here last summer. i'm sure the opening could be made bigger with a grinder 8)
i know on the 2800's the metal flange is really a bottle neck and you do notice a pretty good difference opening it up to match the boot and stock carb. you just need to use one of them brass rings from a stihl to keep the boot from collapsing. of course, i have no idea what stihl the ring is from as i had it here and no idea where it actualy came from :-* it's on my uncles 2800. muff mod, gasket delete and the plate ground open. no porting, the little saw really puts a good whooping on my muffler moded 5105 :)
when I grow up, i wanna be an adult.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4334
  • Karma: 189
  • OHIO REDNECK
Re: Poulan intakes
« Reply #2 on: March 16, 2013, 12:53:11 pm »
You mean intake side of cylinders opening?  I have a 335 and 3450 60cc off right now I can do that with.
REDNECK Saw Repair

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: Poulan intakes
« Reply #3 on: March 16, 2013, 01:14:21 pm »
that, and the opening in the rear handle where the boot goes through where the carb mounts. :)
when I grow up, i wanna be an adult.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4334
  • Karma: 189
  • OHIO REDNECK
Re: Poulan intakes
« Reply #4 on: March 16, 2013, 01:56:18 pm »
I know farmboy said he had to open the opening in rear handle on 3000 3300 305 or something once to use bigger intake.

Otherwise intakes same same to me on cylinder. Even test fitted each too.


REDNECK Saw Repair

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22576
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan intakes
« Reply #5 on: March 16, 2013, 02:07:36 pm »
Found his post.

Just put PP330,3450,3750 intake boot on my 3500.  The intake spigot/snout on the 2800-3500 is the same size as the PP330.  Boot is perfect fit.  Also changed the HDA49 to a HDA164.  Didnt have a intake bracket for larger carb. so I ground out the smaller one to fit the 164.  It's now snoutless.  I don't think it will be a problem as there is plenty of sealing surface.  Next Jacks order I'll probably get a couple intake brackets PN: 530049465 for larger carbs. 
Shep
REDNECK Saw Repair Getter Done

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: Poulan intakes
« Reply #6 on: March 16, 2013, 03:05:08 pm »
 :)thanks cut! is a trick of the pic, or does the 'bigger' boot have a slightly larger intake opening at the cylinder end?
when I grow up, i wanna be an adult.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22576
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan intakes
« Reply #7 on: March 16, 2013, 04:36:09 pm »
:)thanks cut! is a trick of the pic, or does the 'bigger' boot have a slightly larger intake opening at the cylinder end?

Yes the bigger boot has a bigger intake opening.  ;)  I noticed that also before pic.
REDNECK Saw Repair Getter Done

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: Poulan intakes
« Reply #8 on: March 16, 2013, 07:43:30 pm »
hmmmm, so what yer saying is the bigger boot would be a better choice ifins somebody wanted to open up the cyniler a bit. might have to see if i can get me one of thems 8)
when I grow up, i wanna be an adult.

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4547
  • Karma: 292
  • Location: Carpenter, Wyoming
Re: Poulan intakes
« Reply #9 on: March 16, 2013, 07:47:50 pm »
That is great information and good comparison pictures.    That does away with any questions I may have had.
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
0 Replies
180 Views
Last post October 26, 2011, 08:26:30 pm
by Cut4fun .
1 Replies
344 Views
Last post May 31, 2012, 12:56:29 pm
by Cut4fun
7 Replies
405 Views
Last post December 25, 2012, 01:40:35 pm
by JOE.G
12 Replies
276 Views
Last post October 19, 2013, 03:30:14 pm
by jmester
3 Replies
70 Views
Last post January 18, 2014, 12:51:59 pm
by jacob j.
2 Replies
61 Views
Last post October 05, 2014, 03:44:30 pm
by farmboy
18 Replies
299 Views
Last post November 23, 2016, 11:04:05 pm
by oldpro
1 Replies
18 Views
Last post January 27, 2016, 11:34:07 am
by Skippysphins
9 Replies
362 Views
Last post November 24, 2016, 04:46:50 pm
by Eccentric
6 Replies
183 Views
Last post January 23, 2020, 08:52:42 pm
by ENTS