Author Topic: poulan micro's  (Read 1269 times)

0 Members and 1 Guest are viewing this topic.

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 183
  • Karma: 24
poulan micro's
« on: June 04, 2018, 07:15:27 pm »
when was the last year they made the micro series? cant get any one to say on AS...

Share on Facebook Share on Twitter

Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4708
  • Karma: 320
  • Location: Carpenter, Wyoming
Re: poulan micro's
« Reply #1 on: June 04, 2018, 11:33:48 pm »
I really could not tell you Stubnail.   I know I have one in the yellow color so it has a chrome bore in it.    I would have to look at it to see if there is anything on it to indicate when it was made.   

That wood shark is nice does it say anywhere when it was made.
PP 505, 475, 445.

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 183
  • Karma: 24
Re: poulan micro's
« Reply #2 on: June 05, 2018, 12:47:48 am »
has to be around 1996 from what the sticker says...

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 183
  • Karma: 24
Re: poulan micro's
« Reply #3 on: June 05, 2018, 12:51:07 am »
http://acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/e9ea0e0c4eb62b6c88256bfc0011a530?OpenDocument


well i know now they were introduced in 1982... but do not know when they discontinued them...this saw has limiters on it i was shocked to see those.....and the sticker has it as 38 cc but the box says 2.1 it should be 33 ccs but i know poulan would use the same engine in different saws.... im not surprised on that....i have a stihl 009 thats got an 009l engine....from the factory when i bought it... the tech pointed the displacement out...

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23987
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: poulan micro's
« Reply #4 on: June 05, 2018, 07:08:47 am »
I bought my new 2000 in 1994 if I recall right. Seen them for sale for a couple years after that. But then lost track.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23987
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: poulan micro's
« Reply #5 on: June 05, 2018, 07:58:21 am »
Looking at this old thread. Poulan build dates. Shows the 1800 through 1996. Just open the link.  http://chainsawrepair.createaforum.com/poulan/date-these-poulans/msg10895/#msg10895
Like Like x 1 View List

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 183
  • Karma: 24
Re: poulan micro's
« Reply #6 on: June 08, 2018, 05:35:20 pm »
LOOKS like 1996 or late 95... thaqnks

Offline dynodave

  • 4 cube
  • **
  • Posts: 35
  • Karma: 3
  • Location: Hamilton MASS USA
    • AGTS
Re: poulan micro's
« Reply #7 on: June 13, 2018, 06:55:04 pm »
I bought (and still have) my first saw. A micro XXV deluxe 33cc new in Nov 1980. I think that version were 1976--82. Other Micro family units production I guess went much longer...By 95 plastic 2150 were in full swing...
32 saws
ECHO-HOMELITE-HUSQVARNA-McCulloch-PIONEER-POULAN-STHIL
Like Like x 1 View List

Offline trappermike

  • 5 cube
  • ***
  • Posts: 129
  • Karma: 17
  • 40 years mechanical and 2-Stroke racing experience
  • Location: British Columbia, Canada
The Poulan Micros-a great saw.
« Reply #8 on: January 14, 2019, 10:03:10 am »
I saw multitudes of the Poulan Micros working in shops,they were also sold under other brand names of hardware stores etc. in all kinds of colors, but one thing was common to all of them,they ran really well after a normal tune-up,and they just won't die! You can find them for next to nothing or free, spend an hour on it and they run really strong and reliable,most of us mechanics kept a free one to use at home or camping. They really had no problems. One thing to check when tuning one up is to remove the housing under the carb and "fix" the reed valve,It will be slightly bent open and not sealing from years of running,merely flip it over and it will seal tightly again and run great.
When you set the carb on it running you will have the carb cover off,but when you tighten the cover down after the engine will run much richer and have to reset it again, so set the mixture,then just hold the carb cover down tightly and try it,to adjust again just lift the cover off and reset it,hold the cover and check,when it's set right then bolt the cover down.
One of the simplest best mini saws ever made.
Experience builds real horsepower...
When the hammer drops the BS stops:Loggers sports competition!
Like Like x 1 View List

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4701
  • Karma: 216
  • OHIO REDNECK
Re: poulan micro's
« Reply #9 on: February 02, 2022, 09:02:06 am »
Like I needed more micro parts 😳. Price was right though when local member dropped off while picking up a saw 😎👍.  But on the shelf they will go.
He said grey one was runner just pulled carb off for a different one.
Need something just PM.  I only take payments in paypal friends family, USPS money order or cash now.   Just saying no to new tax law. 😉

Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
7 Replies
1695 Views
Last post December 04, 2013, 07:35:40 am
by doreadeal
Poulan Micro

Started by fossil « 1 2 » Poulan

16 Replies
2051 Views
Last post April 17, 2024, 09:05:43 am
by Cut4fun .
Poulan micro XXV

Started by countryhog « 1 2 » Poulan

10 Replies
1421 Views
Last post August 01, 2014, 09:45:30 pm
by Cut4fun .
37 Replies
3294 Views
Last post June 17, 2017, 09:24:24 am
by Cut4fun .
6 Replies
1277 Views
Last post November 16, 2016, 01:09:22 pm
by Cut4fun .
3 Replies
429 Views
Last post April 06, 2020, 07:47:38 am
by Cut4fun .
3 Replies
440 Views
Last post February 11, 2021, 07:57:31 pm
by muzzleblastm38
0 Replies
255 Views
Last post April 01, 2021, 12:31:28 pm
by Cut4fun
0 Replies
400 Views
Last post October 02, 2022, 08:39:31 am
by Cut4fun .
0 Replies
135 Views
Last post June 28, 2024, 03:25:25 pm
by Cut4fun .