« previous next »
Pages: [1]   Go Down

Author Topic: Poulan Micro Oiling  (Read 961 times)

0 Members and 0 Guests are viewing this topic.

Offline Drew_Uth

  • 4 cube
  • **
  • Posts: 38
  • Karma: 3
Poulan Micro Oiling
« on: November 11, 2016, 10:45:18 am »
Hey all, I picked up a few 2.0/2000 top handles recently; two Dayton branded, one older red craftsman and a newer grey craftsman.  Two of the saws run great and oil properly, two wont draw fuel into the carb and stay running (carb kits on the way, they run great when I swap the carbs from the other ones on to test) and two wont oil.  I replaced the line inside the tank on one but it still doesn't oil...I recall seeing that these oilers were run off crankcase pressure?  Any thoughts on what to check, an explanation on how it works would be helpful as well.

Also...two had **** fuel tanks.  One was repairable, the other is garbage.  Anyone got one laying around they don't need?

Thanks!
Logged

Share on Facebook Share on Twitter

Offline fossil

  • 6 cube
  • ****
  • Posts: 203
  • Karma: 64
  • Location: Brampton, Ontario
Re: Poulan Micro Oiling
« Reply #1 on: November 11, 2016, 12:09:23 pm »
The duckbill valve in the check valve PN 530069142 often go bad. The valve assemblies are getting hard to find. They work by taking the positive pulse (piston down stroke) from the crankcase and feeding that to a port on the oil tank causing it to pressurize the tank. If the duckbill valve is shot, the negative pulse from the crankcase allows the pressure to be drawn back. So, no pressure to the oil tank.

There are some check valves on e-bay now.

If you care to rebuild the valve yourself I did this little write up.

Logged
Tim
Winner Winner x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23416
  • Karma: 661
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan Micro Oiling
« Reply #2 on: November 11, 2016, 12:17:35 pm »
Just in case your puter fights like mine. Here is Tim's info saved to a thread last year. Poulan micro check valve rebuild. http://chainsawrepair.createaforum.com/poulan/check-valve-poulan-micro-saws/msg56716/#msg56716
Logged

Offline Drew_Uth

  • 4 cube
  • **
  • Posts: 38
  • Karma: 3
Re: Poulan Micro Oiling
« Reply #3 on: November 11, 2016, 02:43:30 pm »
Ah, I do recall seeing that check valve thread- thanks!  How easy is that assembly to get to?
Logged

Offline Drew_Uth

  • 4 cube
  • **
  • Posts: 38
  • Karma: 3
Re: Poulan Micro Oiling
« Reply #4 on: November 16, 2016, 08:17:58 am »
How critical is the foam around the pick up?
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23416
  • Karma: 661
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan Micro Oiling
« Reply #5 on: November 16, 2016, 01:05:19 pm »
Small open cell foam acts as a filter. I never ran one without.  Seems something you could make from that style foam?
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23416
  • Karma: 661
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan Micro Oiling
« Reply #6 on: November 16, 2016, 01:09:22 pm »
530023801 Oil Filter  part #16  $4 .

Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
7 Replies
1294 Views 		Last post December 04, 2013, 07:35:40 am
by doreadeal
Poulan Micro

Started by fossil « 1 2 » Poulan

14 Replies
1232 Views 		Last post May 08, 2020, 06:40:50 am
by Cut4fun .
Poulan micro XXV

Started by countryhog « 1 2 » Poulan

10 Replies
1011 Views 		Last post August 01, 2014, 09:45:30 pm
by Cut4fun .
17 Replies
3088 Views 		Last post June 23, 2021, 07:55:56 am
by Cut4fun .
37 Replies
2095 Views 		Last post June 17, 2017, 09:24:24 am
by Cut4fun .
poulan micro's

Started by stubnail67 « 1 2 » Poulan

10 Replies
752 Views 		Last post November 29, 2022, 08:38:59 am
by Cut4fun .
3 Replies
262 Views 		Last post April 06, 2020, 07:47:38 am
by Cut4fun .
3 Replies
257 Views 		Last post February 11, 2021, 07:57:31 pm
by muzzleblastm38
0 Replies
144 Views 		Last post April 01, 2021, 12:31:28 pm
by Cut4fun
0 Replies
178 Views 		Last post October 02, 2022, 08:39:31 am
by Cut4fun .