Author Topic: Poulan micro Super xxv Deluxe  (Read 3276 times)

0 Members and 4 Guests are viewing this topic.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4701
  • Karma: 216
  • OHIO REDNECK
Poulan micro Super xxv Deluxe
« on: September 28, 2015, 12:19:25 pm »
2nd one of these Poulan micro Super xxv Deluxe  I have had now.  1st one went to a big poulan collector in tx.   If I remember right 1st one was even nicer.

Original owner saw with original black lettered poulan bar still too.  Said he was using this this year. I just pulled rope to check psi and it felt good.

If anyone wants to trade me out of or buy outright these last 2 poulans before I check them over PM me.   
I went to AV top handles now and have to much poulan micro stuff on the shelves already.  The 3800 isnt a series I keep for myself either.






Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23976
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan micro Super xxv Deluxe
« Reply #1 on: September 28, 2015, 06:44:11 pm »
God must of smiled down on me. The 2 poulans run great and this one just needs a new sponge air filter.  Just wow what luck I had by just pulling the ropes.

Then I got this stihl 031 that someone gave me to work on for the. Grrrrrrrr that one made me sweat. Freaking Pullon my butt. Pullstihl.

Did I ever tell ya I cant stand a 031  :P.  Sell them to the cult like followers too.  ;)

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Poulan micro Super xxv Deluxe
« Reply #2 on: September 28, 2015, 07:33:30 pm »
I don't care for the 031 myself but apparently there's a lot of people that do. The one I had sure sold quick. It started very reasonably.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4708
  • Karma: 320
  • Location: Carpenter, Wyoming
Re: Poulan micro Super xxv Deluxe
« Reply #3 on: September 28, 2015, 10:14:11 pm »
God must of smiled down on me. The 2 poulans run great and this one just needs a new sponge air filter.  Just wow what luck I had by just pulling the ropes.

Then I got this stihl 031 that someone gave me to work on for the. Grrrrrrrr that one made me sweat. Freaking Pullon my butt. Pullstihl.

Did I ever tell ya I cant stand a 031  :P.  Sell them to the cult like followers too.  ;)

You have not worked on a 019T.   
PP 505, 475, 445.

Offline RoyM

  • Gas Hotsaw
  • ******
  • Posts: 502
  • Karma: 45
  • Location: Surrey British Columbia
Re: Poulan micro Super xxv Deluxe
« Reply #4 on: September 28, 2015, 10:42:21 pm »
Those old Stihls sure could test one's patience. I cringed when an 015 or 019T came in the shop, the 031's weren't much better. The little Poulans were very popular here too and relatively easy (for a mini saw) to work on. I don't need another small saw but would grab a clean XXV in a heartbeat if I could find one locally. The exchange rate and freight kill any interest in bringing one across the line.
Old age and treachery always overcome youth and enthusiasm

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2117
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northwestern Wyoming
Re: Poulan micro Super xxv Deluxe
« Reply #5 on: September 29, 2015, 01:30:18 am »
I don't need another Micro.

I don't need another Micro.

I don't need another Micro......

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23976
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan micro Super xxv Deluxe
« Reply #6 on: September 29, 2015, 01:00:41 pm »
God must of smiled down on me. The 2 poulans run great and this one just needs a new sponge air filter.  Just wow what luck I had by just pulling the ropes.

Then I got this stihl 031 that someone gave me to work on for the. Grrrrrrrr that one made me sweat. Freaking Pullon my butt. Pullstihl.

Did I ever tell ya I cant stand a 031  :P.  Sell them to the cult like followers too.  ;)

You have not worked on a 019T.   

Unless just needing a tune. I refuse to and it's crap brothers and cousins too.


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23976
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan micro Super xxv Deluxe
« Reply #7 on: September 29, 2015, 01:03:56 pm »
I don't need another Micro.

I don't need another Micro.

I don't need another Micro......

You have the shipping already.   We can work something out to get it into your hands if you dont have one like this.

Runs good so I didnt have a reason to pull plug or muffler.  You want me to pull plug check psi. 

You can have this for what I have in it too, if your going to keep it for your collection. ;)

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4701
  • Karma: 216
  • OHIO REDNECK

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 183
  • Karma: 24
Re: Poulan micro Super xxv Deluxe
« Reply #9 on: September 29, 2015, 03:07:19 pm »
pretty sure its 33 cc

 

Related Topics

  Subject / Started by Replies Last post
7 Replies
1691 Views
Last post December 04, 2013, 07:35:40 am
by doreadeal
Poulan Micro

Started by fossil « 1 2 » Poulan

16 Replies
2045 Views
Last post April 17, 2024, 09:05:43 am
by Cut4fun .
Poulan micro XXV

Started by countryhog « 1 2 » Poulan

10 Replies
1416 Views
Last post August 01, 2014, 09:45:30 pm
by Cut4fun .
17 Replies
4292 Views
Last post June 23, 2021, 07:55:56 am
by Cut4fun .
6 Replies
1273 Views
Last post November 16, 2016, 01:09:22 pm
by Cut4fun .
3 Replies
429 Views
Last post April 06, 2020, 07:47:38 am
by Cut4fun .
3 Replies
439 Views
Last post February 11, 2021, 07:57:31 pm
by muzzleblastm38
0 Replies
255 Views
Last post April 01, 2021, 12:31:28 pm
by Cut4fun
3 Replies
364 Views
Last post June 20, 2023, 05:56:36 pm
by mnguy
0 Replies
134 Views
Last post June 28, 2024, 03:25:25 pm
by Cut4fun .