Author Topic: Poulan micro Super xxv Deluxe  (Read 1177 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4100
  • Karma: 166
  • OHIO REDNECK
Poulan micro Super xxv Deluxe
« on: September 28, 2015, 12:19:25 pm »
2nd one of these Poulan micro Super xxv Deluxe  I have had now.  1st one went to a big poulan collector in tx.   If I remember right 1st one was even nicer.

Original owner saw with original black lettered poulan bar still too.  Said he was using this this year. I just pulled rope to check psi and it felt good.

If anyone wants to trade me out of or buy outright these last 2 poulans before I check them over PM me.   
I went to AV top handles now and have to much poulan micro stuff on the shelves already.  The 3800 isnt a series I keep for myself either.






REDNECK Saw Repair

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22055
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan micro Super xxv Deluxe
« Reply #1 on: September 28, 2015, 06:44:11 pm »
God must of smiled down on me. The 2 poulans run great and this one just needs a new sponge air filter.  Just wow what luck I had by just pulling the ropes.

Then I got this stihl 031 that someone gave me to work on for the. Grrrrrrrr that one made me sweat. Freaking Pullon my butt. Pullstihl.

Did I ever tell ya I cant stand a 031  :P.  Sell them to the cult like followers too.  ;)
REDNECK Saw Repair Getter Done

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Poulan micro Super xxv Deluxe
« Reply #2 on: September 28, 2015, 07:33:30 pm »
I don't care for the 031 myself but apparently there's a lot of people that do. The one I had sure sold quick. It started very reasonably.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4470
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan micro Super xxv Deluxe
« Reply #3 on: September 28, 2015, 10:14:11 pm »
God must of smiled down on me. The 2 poulans run great and this one just needs a new sponge air filter.  Just wow what luck I had by just pulling the ropes.

Then I got this stihl 031 that someone gave me to work on for the. Grrrrrrrr that one made me sweat. Freaking Pullon my butt. Pullstihl.

Did I ever tell ya I cant stand a 031  :P.  Sell them to the cult like followers too.  ;)

You have not worked on a 019T.   
PP 505, 475, 445.

Offline RoyM

  • Gas Hotsaw
  • ******
  • Posts: 502
  • Karma: 45
  • Location: Surrey British Columbia
Re: Poulan micro Super xxv Deluxe
« Reply #4 on: September 28, 2015, 10:42:21 pm »
Those old Stihls sure could test one's patience. I cringed when an 015 or 019T came in the shop, the 031's weren't much better. The little Poulans were very popular here too and relatively easy (for a mini saw) to work on. I don't need another small saw but would grab a clean XXV in a heartbeat if I could find one locally. The exchange rate and freight kill any interest in bringing one across the line.
Old age and treachery always overcome youth and enthusiasm

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Poulan micro Super xxv Deluxe
« Reply #5 on: September 29, 2015, 01:30:18 am »
I don't need another Micro.

I don't need another Micro.

I don't need another Micro......
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22055
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan micro Super xxv Deluxe
« Reply #6 on: September 29, 2015, 01:00:41 pm »
God must of smiled down on me. The 2 poulans run great and this one just needs a new sponge air filter.  Just wow what luck I had by just pulling the ropes.

Then I got this stihl 031 that someone gave me to work on for the. Grrrrrrrr that one made me sweat. Freaking Pullon my butt. Pullstihl.

Did I ever tell ya I cant stand a 031  :P.  Sell them to the cult like followers too.  ;)

You have not worked on a 019T.   

Unless just needing a tune. I refuse to and it's crap brothers and cousins too.

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22055
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan micro Super xxv Deluxe
« Reply #7 on: September 29, 2015, 01:03:56 pm »
I don't need another Micro.

I don't need another Micro.

I don't need another Micro......

You have the shipping already.   We can work something out to get it into your hands if you dont have one like this.

Runs good so I didnt have a reason to pull plug or muffler.  You want me to pull plug check psi. 

You can have this for what I have in it too, if your going to keep it for your collection. ;)
REDNECK Saw Repair Getter Done

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4100
  • Karma: 166
  • OHIO REDNECK
REDNECK Saw Repair

Offline stubnail67

  • 6 cube
  • ****
  • Posts: 180
  • Karma: 23
Re: Poulan micro Super xxv Deluxe
« Reply #9 on: September 29, 2015, 03:07:19 pm »
pretty sure its 33 cc

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
983 Views
Last post April 02, 2012, 09:31:29 am
by 2spud
Poulan S25DA super 25

Started by Cut4fun « 1 2 ... 7 8 » Poulan

76 Replies
6233 Views
Last post December 23, 2015, 03:36:20 pm
by Eccentric
6 Replies
524 Views
Last post October 31, 2014, 02:59:37 pm
by Cut4fun .
7 Replies
903 Views
Last post December 04, 2013, 07:35:40 am
by doreadeal
Poulan Micro

Started by fossil « 1 2 » Poulan

14 Replies
524 Views
Last post May 08, 2020, 06:40:50 am
by Cut4fun .
Poulan micro XXV

Started by countryhog « 1 2 » Poulan

10 Replies
527 Views
Last post August 01, 2014, 09:45:30 pm
by Cut4fun .
16 Replies
1563 Views
Last post January 07, 2020, 07:57:44 am
by Super360
6 Replies
505 Views
Last post November 16, 2016, 01:09:22 pm
by Cut4fun .
8 Replies
282 Views
Last post January 14, 2019, 10:03:10 am
by trappermike
3 Replies
88 Views
Last post April 06, 2020, 07:47:38 am
by Cut4fun .