Author Topic: NLA Poulan Parts 2700-3600 3450-3750 PP330-380 Crank Seals etc  (Read 1318 times)

0 Members and 0 Guests are viewing this topic.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
You guys see those last 2 NOS small intake boots on bay sell for $35 apiece. Didnt last long either (back in Dec).  I just couldnt do that high even to set back.

Have been doing some back searching and there is a couple sellers out the gouging the heck out of poulan prices. 

There certainly are.  Have you seen the sellers (believe there are two) that have been listing starter pulleys for Poulan 4000 (and PP375-395) saws for $45-$70 EACH?  One of those sellers is listing an NOS Poulan Micro auto oiler check valve for $25.  That's highway robbery.  They're taking advantage of folks who want to get their old saw back up and running.  That one seller is an AS member too IIRC.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22068
  • Karma: 547
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
I was thinking one was on AS.

Yep seen the valve.  I would give someone a used one if needed to keep them from getting ripped off by these folks.
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4471
  • Karma: 274
  • Location: Carpenter, Wyoming
I believe they know that some of these parts are NLA or they are going to be, so they price gouge the heck out of buyers.
PP 505, 475, 445.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22068
  • Karma: 547
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
More crank seals came in on my ordertree order. couple big intake boots, rings for 54cc gasket kit circlips and forgot the blasted 60cc rings.  $9.99 for shipping a 1st class package only draw back.

Going to get my 60cc rings for $2.60 apiece and shipping $3something at mowers4u.
REDNECK Saw Repair Getter Done

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4471
  • Karma: 274
  • Location: Carpenter, Wyoming
More xcrank seals came in on my ordertree order. couple big intake boots, rings for 54cc gasket kit circlips and forgot the blasted 60cc rings.  $9.99 for shipping a 1st class package only draw back.

Going to get my 60cc rings for $2.60 apiece and shipping $3something at mowers4u.

That is good news.    I have some crank seals coming and already have a couple of the large intake boots.   I should get some of those circlips.   I have a spare carb also.   The rings I think I have a couple of sets too.   I should check on those since they are so cheap.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22068
  • Karma: 547
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Dang Mowers4u is fast. 60cc rings showed up today.  Combined the shipping so $3 and change shipping.
REDNECK Saw Repair Getter Done

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4106
  • Karma: 166
  • OHIO REDNECK
Gregg had told a guy to just get the 60cc piston from ordertree  8). The guy comes back and say shows NLA  :o.  I went and checked and SOB it is.  :'(

Poulan 365 3500 3750 380 piston NLA now too   530069549  :(
REDNECK Saw Repair

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4471
  • Karma: 274
  • Location: Carpenter, Wyoming
That sucks.
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
3 Replies
359 Views
Last post February 03, 2013, 06:33:10 pm
by 660magnum
16 Replies
1062 Views
Last post April 11, 2014, 07:03:51 am
by Tractorsaw1
8 Replies
248 Views
Last post January 26, 2014, 03:18:52 am
by Eccentric
11 Replies
551 Views
Last post July 16, 2014, 08:03:38 pm
by bustedknuckles
9 Replies
527 Views
Last post April 24, 2015, 07:43:36 pm
by Cut4fun .
2 Replies
185 Views
Last post March 20, 2015, 10:16:41 pm
by 3000 FPS
2 Replies
184 Views
Last post September 28, 2015, 12:40:53 pm
by Cut4fun .
4 Replies
156 Views
Last post November 22, 2015, 11:58:01 am
by Cut4fun .
17 Replies
301 Views
Last post December 06, 2017, 05:58:03 pm
by Cut4fun .
0 Replies
107 Views
Last post August 31, 2018, 06:26:35 pm
by Cut4fun .