Author Topic: Poulan Predator 335 red  (Read 773 times)

0 Members and 0 Guests are viewing this topic.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2111
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: poulan predator 335
« Reply #20 on: July 19, 2015, 12:15:01 am »
Hey Aaron I think the red and black is good looking on a saw also.

I agree Roger.  Especially when they have an engine turned bar on 'em.



I'm going to have to do that for my 'looker' Craftsman 2.3PS/VL.

-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4480
  • Karma: 276
  • Location: Carpenter, Wyoming
Re: poulan predator 335
« Reply #21 on: July 19, 2015, 12:17:54 am »
That was a wire brush and a drill press.   It seems to stay with the bar even though I have used it.   

I just brought that saw home from Cheyenne where I had it stored for awhile.    I might take it on my next trip to the mountains when I go for more firewood.
PP 505, 475, 445.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2111
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: poulan predator 335
« Reply #22 on: July 19, 2015, 01:00:13 am »
That's how I'm going to do it.  Just a small cup brush in the drill press and a few beers.  Will be an old Windsor Mini-Pro bar for my Craftsman/Poulan.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4480
  • Karma: 276
  • Location: Carpenter, Wyoming
Re: poulan predator 335
« Reply #23 on: July 19, 2015, 10:51:09 am »
That's how I'm going to do it.  Just a small cup brush in the drill press and a few beers.  Will be an old Windsor Mini-Pro bar for my Craftsman/Poulan.


I want to see a picture when your done with it.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22135
  • Karma: 552
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: poulan predator 335
« Reply #24 on: November 05, 2018, 08:04:56 am »
Roger someone sent me this pic today. Ask me if good saw. I told them buy it and if thay dont buy it and ship to me.  Then I will check it over and get into right folks hands.

Poulan 335 predator

REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4480
  • Karma: 276
  • Location: Carpenter, Wyoming
Re: poulan predator 335
« Reply #25 on: November 05, 2018, 11:56:37 am »
I had mine out about 2 weeks ago.   I was over at the brother in law cutting up some rounds for him to be split.    We did 2 1\2 cords in one day.   The 335 ran excellent.    You really do not see those 335 predators very often.    Pretty cool you found another.
PP 505, 475, 445.
Agree Agree x 2 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22135
  • Karma: 552
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: poulan predator 335
« Reply #26 on: November 05, 2018, 03:15:50 pm »
Not me another guy on CRG wanted info on them from me in PM.  Wanted to know if he should buy it. I was like yes. He got it for $80.
REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22135
  • Karma: 552
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: poulan predator 335
« Reply #27 on: November 29, 2018, 10:17:55 pm »
Another one.
Looks like he has the wider 365 3500 air filter cover on it. Maybe different cylinder cover too.



REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4480
  • Karma: 276
  • Location: Carpenter, Wyoming
Re: poulan predator 335
« Reply #28 on: November 30, 2018, 11:56:28 am »
Never seen that before.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22135
  • Karma: 552
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: poulan predator 335
« Reply #29 on: November 30, 2018, 01:05:50 pm »
Never seen that before.

He did it and think he said he put a 49mm topend on it aka 365 3500. 
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
Poulan 505

Started by man of stihl « 1 2 ... 41 42 » Poulan

413 Replies
8465 Views
Last post August 23, 2020, 03:37:08 pm
by Cut4fun .
222 Replies
7088 Views
Last post June 29, 2020, 07:46:24 pm
by Cut4fun .
Poulan 325

Started by Cut4fun . « 1 2 ... 8 9 » Poulan

86 Replies
3056 Views
Last post June 11, 2020, 04:24:50 pm
by Cut4fun .
Poulan 425

Started by Cut4fun « 1 2 » Poulan

15 Replies
1097 Views
Last post March 18, 2014, 02:19:35 pm
by Cut4fun .
4 Replies
564 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1281 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
5 Replies
287 Views
Last post October 01, 2020, 09:08:49 am
by Cut4fun .
2 Replies
243 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .
8 Replies
229 Views
Last post December 31, 2018, 09:04:53 am
by Cut4fun .
2 Replies
63 Views
Last post June 12, 2020, 10:13:07 am
by Cut4fun .