Author Topic: Poulan 325  (Read 2993 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan Pro 325
« Reply #60 on: February 07, 2014, 01:14:48 pm »
Thanks, that makes sense!

The main reason I asked is that the only specs I have seen for the P5500 show a weight of about 12.1 lbs (5.5 kg really).

I don't know how long those saws were made, in either color.

Btw, 1988 - 1990 indicates they all were made at the Husky factory.

That would be closer  to right weight I bet for 325.  Since the 5000 actual weight shows 11lb 8+ounce and the same info on the 5000 where I got the 325 OEM spec info is 1lb less then actual.

Pioneer / Partner   1987   5000   
Engine Make:    Own
   
Engine Size Cubic Centimeters:    49
Engine Size Cubic Inches:    3
   
Dry Weight:    10.8
Bar Oiler Type:    Automatic
   
Bar Length:    16


Pioneer / Partner   1986   5000   
Engine Make:    Own
   
Engine Size Cubic Centimeters:    49
Engine Size Cubic Inches:    3
   
Dry Weight:    10.8
Bar Oiler Type:    Automatic
   
Bar Length:    16


Pioneer / Partner   1985   5000 Plus   
Engine Make:    Own
   
Engine Size Cubic Centimeters:    49
Engine Size Cubic Inches:    3
   
Dry Weight:    10.8
Bar Oiler Type:    Automatic
   
Bar Length:    16

REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Poulan Pro 325
« Reply #61 on: February 07, 2014, 02:30:52 pm »

That would be closer  to right weight I bet for 325.  Since the 5000 actual weight shows 11.8 and the same info on the 5000 where I got the 325 OEM spec info is 1lb less then actual. 

....


Wasn't it 11 lbs 8.3 oz?

That is of course still more than the specs said, but not a full pound.  ;)

Could the US weight specs have been without a chain brake at that point (mid to late 1980s)?

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: Poulan Pro 325
« Reply #62 on: February 07, 2014, 02:39:13 pm »
The place I am looking at had 5000 at 10.8 and actual was 11.8plus   

Cant you see the 10.8 in the 3 listed above.
REDNECK Saw Repair

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Poulan Pro 325
« Reply #63 on: February 07, 2014, 02:48:48 pm »
The place I am looking at had 5000 at 10.8 and actual was 11.8plus   

Cant you see the 10.8 in the 3 listed above.

 ???  I can -  but to me it looks like your scale showed 11 lbs 8.3 oz - and that isn't 11.8 lbs (it is just over 11.5).

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4045
  • Karma: 159
  • OHIO REDNECK
Re: Poulan Pro 325
« Reply #64 on: February 07, 2014, 02:50:44 pm »
OK back up what saw are you talking about?   

 No where that I posted, did the 5000 oem spec say 11.5   ???  it showed 10.8 spec oem  ???


I see what your saying on the 11.8 now.  11lb 8 ounces   Does come out wrong taking a short cut posting it like 11.8 LOL. My bad on that part.

The 325 showed 11.5 from oem specs by the way.  I'm betting super high 11's to low 12's on that one.

Oh not my scales. I just search the internet for pics.
REDNECK Saw Repair

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Poulan Pro 325
« Reply #65 on: February 07, 2014, 03:02:12 pm »
OK back up what saw are you talking about?   

 No where that I posted, did the 5000 oem spec say 11.5   ???  it showed 10.8 spec oem  ???

No, you didn't - but your real weight picture in the P5000 weight thread showed 11 lbs 8.3 oz, and that is just over 11.5 lbs.

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: Poulan Pro 325
« Reply #66 on: February 07, 2014, 03:05:14 pm »
......

I see what your saying on the 11.8 now.  11lb 8 ounces   Does come out wrong taking a short cut posting it like 11.8 LOL. My bad on that part.

......


 8)

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan Pro 325
« Reply #67 on: September 07, 2014, 07:52:34 pm »
Found side view of oem poulan pro 325 piston 46mm aka partner 5500.

REDNECK Saw Repair Getter Done

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: Poulan Pro 325
« Reply #68 on: September 07, 2014, 08:03:31 pm »
That piston looks nice!  Be interesting to try that in the 46mm Meteor cylinder!   

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan Pro 325
« Reply #69 on: January 16, 2017, 06:15:36 pm »
Besides the other NOS parts I have been getting.

Found 3 of the NOS poulan 325 clutch covers. Also fit the partner 500 5000 5500 540, jonsered 490 590.

If someone needs me to pick these up let me know.

REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
Poulan 220

Started by Cut4fun . « 1 2 » Poulan

17 Replies
840 Views
Last post June 17, 2017, 12:25:32 pm
by Cut4fun .
Poulan 365

Started by Cut4fun « 1 2 ... 16 17 » Poulan

169 Replies
4998 Views
Last post January 31, 2018, 07:59:31 pm
by stubnail67
Poulan pro 236

Started by Cut4fun . « 1 2 3 4 5 » Poulan

48 Replies
1611 Views
Last post December 04, 2015, 10:59:11 am
by Cut4fun .
Poulan 260

Started by Cut4fun « 1 2 3 » Poulan

22 Replies
1315 Views
Last post September 19, 2016, 08:43:52 pm
by Chris-PA
Poulan s-25

Started by Al Smith « 1 2 3 4 5 » Poulan

40 Replies
2589 Views
Last post February 07, 2014, 05:41:44 pm
by Eccentric
222 Replies
6606 Views
Last post June 29, 2020, 07:46:24 pm
by Cut4fun .
4 Replies
538 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1188 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
2 Replies
215 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .
8 Replies
210 Views
Last post December 31, 2018, 09:04:53 am
by Cut4fun .