Chainsaw Repair

I grabbed one of the projects I bought over the last few years. Since it seems everyone wants a runner not a project to do themselves.

I was told this one was a runner when I bought it PHO. Dang it was, after a quick check over 😲. Took alot of air and brushing to get some of the jammed packed chips everywhere. One of those saws that must have never been cleaned. I even left the old fuel line and impulse line as they looked ok to test with. 1999 Poulan 3450 54cc

I even dug through my parts and found 1 3750 380 60cc OEM used piston and cylinder kit.

IMO I wouldnt change it from the 54cc being it cut so dang good just now in some dry ash with 16" 3/8 buried. With that big dawg maybe 14" cutting.

Pulled them dang epa stops too while tuning. Piston looked like they had been running old mix over the years. Think the batch I am running now is VP racing 40:1 e-free 90. Wondering how long to see if it is cleaning it up.

Some wrong fasteners but I dont give a rip about such things myself.