Author Topic: Poulan 415  (Read 2978 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20422
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #70 on: March 21, 2018, 05:53:46 pm »
Just helping a guy out with a poulan needing a recoil.  Just happen to have some red I dont mind sending his way.

REDNECK Saw Repair Getter Done

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3810
  • Karma: 141
  • OHIO REDNECK
Re: Poulan 415
« Reply #71 on: August 19, 2018, 03:33:48 pm »
Hate seeing the little independent guys shop closing.
So I got what I really wanted and some I didnt really want.
He said the auction will be happening soon with what is left. Mostly mower stuff now.

REDNECK Saw Repair

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3810
  • Karma: 141
  • OHIO REDNECK
Re: Poulan 415
« Reply #72 on: August 20, 2018, 10:12:56 am »
Not bad checking it over.  8)
Topend through plug hole looking at cylinder ext side looked sweet. 
Was missing 2 fasteners and 2 tank nuts on the upper left av mount  :o. Cant believe they didnt rip the right top cylinder handle av due to this.
3 wrong recoil fasteners = I have.
Missing tank handle insert = " ".  503427502
Looks like someone had made and rerun the  on/off wire to coil over time. Routed wrong which I will try and make right.
Oh the usual inner clutch cover deform I will fix later too.


 

REDNECK Saw Repair

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20422
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #73 on: August 20, 2018, 01:51:18 pm »
Grabbed some pics when passed through to get the mowers out. 
REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4279
  • Karma: 249
  • Location: Carpenter, Wyoming
Re: Poulan 415
« Reply #74 on: August 20, 2018, 09:49:31 pm »
Nice Kevin.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20422
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #75 on: August 23, 2018, 05:04:32 pm »
Finally finished testing the PP415 65cc I picked up from a closing shop. Ran fine at full throttle in the cuts but couldnt get it to idle very long before it stopped. All the tuning in the world no help. So I started digging.
Suppose to have been ready to cut. He said he had been in the carb. Well maybe he was. But the fulcrum was bent side ways and the carb kit was getting real iffy.
So cleaned carb and put new kit in it. Still same problem.
Being I had a 2083 that I had just rebuilt the carb and knew it was known good I swapped it in. Good to go.
Figured the L side has some blockage somewhere.
65cc with 24" full comp buried in dry ash. 100% satisfied with it now.


REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20422
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #76 on: September 11, 2018, 02:40:20 pm »
Calling it a day. 😎😋
Getting ready to meet someone halfway across Ohio with a few saws.
The PP415 that I just recently bought. Pulled the muffler to make sure even though looked through plug hole when I was checking things. Piston still has like new witness marks on the piston.



REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20422
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #77 on: October 06, 2018, 07:02:10 pm »
Another find. Now this one is more to my liking.
Will be putting the full wrap and set of big dawgs I have on hand on WT505.

I got used to a full wrap on the 385 when I was running it with the 505. Sold the 385 and kept the 505.


REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20422
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #78 on: October 12, 2018, 03:46:11 pm »
Full wrap 415 showed up today. No time to dig in. But looks like low usage for fire dept saw.

Crap chain and wrong bar mount =  D176. But hey they were close.

They had ground down the big dawg almost to the case due to bolting to the full wrap. Handel in great shape and all I cared about.    1990 and with older air filter and tank set up.

REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20422
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #79 on: October 13, 2018, 12:38:09 pm »
Waiting it's turn in line. Paying saws first.



REDNECK Saw Repair Getter Done
Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
Poulan 365

Started by Cut4fun « 1 2 ... 16 17 » Poulan

169 Replies
4753 Views
Last post January 31, 2018, 07:59:31 pm
by stubnail67
Poulan 295 Porting

Started by Dh1984 « 1 2 » Poulan

11 Replies
1308 Views
Last post May 20, 2011, 08:55:11 am
by Dh1984
3 Replies
351 Views
Last post June 11, 2011, 05:25:29 pm
by Cut4fun
Poulan pro 236

Started by Cut4fun . « 1 2 3 4 5 » Poulan

48 Replies
1487 Views
Last post December 04, 2015, 10:59:11 am
by Cut4fun .
Poulan 1800

Started by Cut4fun . « 1 2 » Poulan

12 Replies
1123 Views
Last post December 23, 2013, 06:06:19 pm
by bustedknuckles
221 Replies
5480 Views
Last post June 21, 2018, 08:30:48 am
by Cut4fun .
Poulan Pro 325

Started by Cut4fun . « 1 2 ... 7 8 » Poulan

73 Replies
2550 Views
Last post May 14, 2017, 08:06:09 am
by Cut4fun .
4 Replies
435 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
826 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
2 Replies
150 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .