Author Topic: Poulan 415  (Read 3803 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22064
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #90 on: November 01, 2018, 10:55:41 am »
Thinking this 415 running  the updated plastic worm gear like 505 etc. Might become a 475.

Going to see if they used the updated worm kit like I bought NOS.


Updated yellow tank was the choice.

Used 475 cylinder and have the used piston and a NOS 475 piston kit left too.  I might just use that used piston I got from Roger on trade for a nos one. If the skirts are good to go and just clean that slight rub up.






REDNECK Saw Repair Getter Done

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4471
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan 415
« Reply #91 on: November 01, 2018, 11:27:35 am »
Yep you could make it a 475.   You would have a bigger saw with pretty much the same weight.   
PP 505, 475, 445.
Agree Agree x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22064
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #92 on: November 01, 2018, 12:27:46 pm »
Just saving pics for someone. A back up redneck repaired tank and handle I took in trade years ago on a NOS tank.
Now someone wants this plus some other NOS parts.
The prefilter is NLA new and most folks dont even know about them. Keeps the bigger chips from entering on the non air injection saws.
The fix the guy did is stronger then oem area. Well done.  ;)

 Poulan 503434101  Pre Cleaner

 Poulan 501269702 ANTIVIBE ELEMENT Standard upper

 Poulan 504125014  AV-RUBBER  Heavy Duty  upper

 Poulan 501814701  Shock Mount  lowers





REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22064
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #93 on: November 21, 2018, 12:39:18 pm »
Just pulled the clutch on the last 415 to see if that had put the whole updated worm gear with the plastic worm gear I could see being used on it.

Yep, right drum, worm gear and the sleeve used to replace them on the metal worm gear etc with outer seal 415 475. 


Like one on left in old pic.





REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22064
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #94 on: December 13, 2018, 04:15:16 pm »
1 more project trying to decide which way I am going with it. I sold the old early tank off it to help a shop with a 475 needing tank. So have the later updated tank ready. Just trying to decide between 415 or 445 cylinder.
Sold all my 475 topends and still have a 505 going. So they werent needed.

Still waiting on 1 more part for that dang 026. So working on some of mine.


REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22064
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #95 on: December 25, 2018, 02:02:59 pm »
Husky Jred Partner Poulan folks might know this.
I always just used redneck tools in past to remove them. Looking for part # or numbers. The oem tool that is used to remove rubber anti vibes. Just for these 2 501269702 504125014 That 2 prong tools they make. Think maybe 3 total.

generic set https://www.ebay.com/itm/HUSQVARNA-61-266-268-272-ISSOLATOR-BUFFER-TOOL-FOR-501773401-AND-501773501/361535533388?hash=item542d32714c:g:S7UAAOSw-nZTrJAK

oem looks like this pic

REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22064
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #96 on: December 25, 2018, 02:56:30 pm »
AV rubber damper
removal tool, 11 mm
For models: 61, 268, 272
Part. No. 502 50 67-01

AV rubber damper
removal tool, 14 mm
For models: 136, 141, 42,
242, 246, 61, 268, 272, 250R
Part. No. 502 51 00-02

AV rubber damper
removal tool, 18 mm
For models: 61, 268, 272,
288, 394, 3120
Part. No. 502 50 66-02

503554201   415 475 washer

503230014 has been superceded to 503230058  425 445 505 washer
REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4471
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: Poulan 415
« Reply #97 on: December 26, 2018, 08:15:39 pm »
This Web site has a lot of good info stored in it now.
PP 505, 475, 445.
Agree Agree x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22064
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #98 on: December 30, 2018, 10:14:12 am »
Paid for now to see if they are all 3 in stock. Pretty sure I only needed the 18mm for the 3 rubber av 415 475  poulans. 


502510002
Husqvarna U-Spanner 502510002
$6.99

502506602
Husqvarna U-Spanner 502506602
$6.99

502506701
Husqvarna U-Spanner 502506701
$6.99

$20.97
Subtotal:

$8.99
Shipping:

Total
$29.96
REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22064
  • Karma: 546
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #99 on: January 04, 2019, 10:21:27 am »
2 was put on back order through the dealer I ordered.  Other 1 I think they said not going to carry anymore through husky. 

415 65cc old style - 425 65cc updated and air injection.
445 70.7cc updated and air injection
475 76.5cc old style
505 82.5cc updated and air injection

415 425 445 have quad port cylinders
475 505 dual trans ports.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
Poulan 365

Started by Cut4fun « 1 2 ... 16 17 » Poulan

169 Replies
5030 Views
Last post January 31, 2018, 07:59:31 pm
by stubnail67
Poulan 295 Porting

Started by Dh1984 « 1 2 » Poulan

11 Replies
1432 Views
Last post May 20, 2011, 08:55:11 am
by Dh1984
3 Replies
385 Views
Last post June 11, 2011, 05:25:29 pm
by Cut4fun
Poulan pro 236

Started by Cut4fun . « 1 2 3 4 5 » Poulan

48 Replies
1655 Views
Last post December 04, 2015, 10:59:11 am
by Cut4fun .
222 Replies
6890 Views
Last post June 29, 2020, 07:46:24 pm
by Cut4fun .
4 Replies
555 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1245 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
5 Replies
270 Views
Last post October 01, 2020, 09:08:49 am
by Cut4fun .
2 Replies
235 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .
8 Replies
225 Views
Last post December 31, 2018, 09:04:53 am
by Cut4fun .