Author Topic: Poulan 415  (Read 3702 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #50 on: January 27, 2017, 02:56:08 pm »
I just bought a 415 and am anxious to run one.  However, it needs a clutch cover.
Does anyone here have one that I could purchase?
Thanks!


Just though of this too.

@Fishnuts2  if color dont matter. I have a Jred one I had painted orage and made a homemade sticker for a project saw I never finished.

You have the OUTSIDE metal plate that goes between the plastic cluch cover and bar I hope. They are a must on these IMO.

Pic below

Before


After


Then some homemade decals




REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #51 on: January 27, 2017, 03:08:04 pm »
Heck even have the cover I made from a 268 husky cover.  Dont use it anymore either. Made it when I was 1 short.

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #52 on: January 27, 2017, 03:11:07 pm »
For the plastic cover you want this too 501444501 Bar Plate Outer

Price: $4.50  http://www.ereplacementparts.com/guide-plate-p-616879.html

Also on these

Husqvarna
61 (1980-02) Chainsaw
61 (1981-02) Chainsaw
61 (1982-05) Chainsaw
61 (1983-09) Chainsaw
61 (1984-01) Chainsaw
61 (1984-10) Chainsaw
61 (1985-06) Chainsaw
61 (1986-03) Chainsaw
61 (1986-12) Chainsaw
61 (1987-11) Chainsaw
61 (1988-06) Chainsaw
61 (1997-01) Chainsaw
66 (1987-06) Chainsaw
66 (1988-08) Chainsaw
66 (1989-02) Chainsaw
66 (1991-03) Chainsaw
298 (1987-01) Chainsaw
298 (1987-06) Chainsaw
266 (1981-09) Chainsaw
266 (1982-12) Chainsaw
266 (1983-06) Chainsaw
266 (1984-08) Chainsaw
266 (1984-10) Chainsaw
266 (1985-01) Chainsaw
266 (1985-06) Chainsaw
266 (1986-01) Chainsaw
285 (1981-12) Chainsaw
298 (1986-04) Chainsaw
162 (1980-02) Chainsaw
162 (1980-12) Chainsaw
2100 (1981-10) Chainsaw
2100 (1982-11) Chainsaw
2100 (1983-11) Chainsaw
2100 (1984-04) Chainsaw
2100 (1985-08) Chainsaw
2100 CD (1979-12) Chainsaw
2101 (1987-04) Chainsaw
2101 (1988-03) Chainsaw
2101 (1989-02) Chainsaw
2101 (1990-06) Chainsaw
REDNECK Saw Repair Getter Done

Online Fishnuts2

  • 4 cube
  • **
  • Posts: 56
  • Karma: 15
Re: Poulan 415
« Reply #53 on: January 27, 2017, 10:37:07 pm »
Thanks for all your research!
I found one from a fellow that had lots of Jonsered parts. A little paint and I should good to go.


Sent from my iPhone using Tapatalk
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #54 on: January 28, 2017, 11:43:21 am »
Thanks for all your research!
I found one from a fellow that had lots of Jonsered parts. A little paint and I should good to go.


Sent from my iPhone using Tapatalk

If you get a chance to grab a poulan yellow metal or jonsered metal clutch cover = snag it.  I only have 1 of each.  Jred is NOS and the poulan is used from a 445.
REDNECK Saw Repair Getter Done

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4460
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Poulan 415
« Reply #55 on: January 28, 2017, 11:57:49 pm »
Even the plastic ones are not easy to come by.
PP 505, 475, 445.

Online Fishnuts2

  • 4 cube
  • **
  • Posts: 56
  • Karma: 15
Re: Poulan 415
« Reply #56 on: January 31, 2017, 09:49:49 am »
The one I bought is plastic and it came with the metal bar plate already on it.
He told me it was only one they had left too!


Sent from my iPhone using Tapatalk
Like Like x 1 View List

Online Fishnuts2

  • 4 cube
  • **
  • Posts: 56
  • Karma: 15
Re: Poulan 415
« Reply #57 on: March 01, 2017, 10:55:52 am »

Got the 415 out for a cut this morning. It pulled this 24" nicely, but I have a 20" that's going on when the chain arrives. I also ordered a panel for the grip but won't be here for a couple weeks. Now to paint the clutch cover and off to surprise some farm boss operators!


Sent from my iPhone using Tapatalk
Like Like x 2 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4460
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Poulan 415
« Reply #58 on: March 01, 2017, 11:47:12 am »
That saw will surprise more than a farm boss owner.   The 415 is one I do not own yet.   
PP 505, 475, 445.
Agree Agree x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21879
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 415
« Reply #59 on: March 01, 2017, 12:50:00 pm »
fishnut it should just laugh at a farmboss 290 or the new even smaller farmoss 270.  It better be kicking the 390 391 stihls with ease if it is running right.

My 415 is one of the strongest 64cc 65cc saws I have run to date.   Now that being said. I have yet to run a stock dolmar 6400 or solo 665.  Always wanted too but it has never worked out.

2x 415 and 1 425.   Roger if you can find the newer 425 would be the one to get. Updated like the 445 505. ;) But same cylinder as 415.
REDNECK Saw Repair Getter Done
Like Like x 2 View List

 

Related Topics

  Subject / Started by Replies Last post
Poulan 365

Started by Cut4fun « 1 2 ... 16 17 » Poulan

169 Replies
4998 Views
Last post January 31, 2018, 07:59:31 pm
by stubnail67
Poulan 295 Porting

Started by Dh1984 « 1 2 » Poulan

11 Replies
1407 Views
Last post May 20, 2011, 08:55:11 am
by Dh1984
3 Replies
371 Views
Last post June 11, 2011, 05:25:29 pm
by Cut4fun
Poulan pro 236

Started by Cut4fun . « 1 2 3 4 5 » Poulan

48 Replies
1611 Views
Last post December 04, 2015, 10:59:11 am
by Cut4fun .
Poulan 1800

Started by Cut4fun . « 1 2 » Poulan

12 Replies
1182 Views
Last post December 23, 2013, 06:06:19 pm
by bustedknuckles
222 Replies
6608 Views
Last post June 29, 2020, 07:46:24 pm
by Cut4fun .
4 Replies
538 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1188 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
2 Replies
215 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .
8 Replies
210 Views
Last post December 31, 2018, 09:04:53 am
by Cut4fun .