Author Topic: Poulan 475  (Read 8964 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21764
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 475
« Reply #330 on: November 21, 2017, 10:38:40 am »
Hooked up the maker and another guy needing one. Think they are going to give it a try.

I had question about the plastic holding up.  =  it depends on temp and if i used nylon it would help, i mostly do rc stuff.
 i can 3d print anything you want pretty much if i have something to work off of

1st one will be made.   8)
REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21764
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 475
« Reply #331 on: November 21, 2017, 10:42:37 am »
2 going to be made so I can test one out and compare.

Stated he will order some higher heat plastic being his normal plastic starts to melt at 300. Seeing if he can get 400 or better.

Pic I showed of it being right there bu clutch. = figuring heat.



REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4444
  • Karma: 271
  • Location: Carpenter, Wyoming
Re: Poulan 475
« Reply #332 on: November 21, 2017, 11:14:13 am »
Yep those clutches can get pretty hot.   I am looking forward to the results.    That sure would be cool if it works.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21764
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 475
« Reply #333 on: November 21, 2017, 12:17:15 pm »
Yep those clutches can get pretty hot.   I am looking forward to the results.    That sure would be cool if it works.

Wonder what kind of heat numbers would be transferred to the plastic part worm gear there. 
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4444
  • Karma: 271
  • Location: Carpenter, Wyoming
Re: Poulan 475
« Reply #334 on: March 13, 2018, 07:13:30 pm »
I had my 475 out today to cut some of this Elm off.     I had not run this saw since 2015 and it fired up and did not even need tuning.    This saw always runs great.

It has a 28" bar here in this pic.    I could not lift this log with my tractor is why I cut the end off.   

PP 505, 475, 445.
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21764
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 475
« Reply #335 on: March 14, 2018, 07:10:06 am »
Nice on both Roger.   8)

Forgot to post here this 475 a guy found in Alaska.  Found in a pawnshop for 100. He ask us was it worth it as he didnt know the saw. We were like BIN! He got it for $80.

Need to grab the pics.



REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21764
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 475
« Reply #336 on: March 14, 2018, 07:31:39 am »
Found them. They were already buried deep after a couple days.

Also had a video of it running. Deal of the month year whatever IMO.





REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4444
  • Karma: 271
  • Location: Carpenter, Wyoming
Re: Poulan 475
« Reply #337 on: March 14, 2018, 10:39:01 am »
That is a heck of a deal.

I have to say Kevin the 475 I have is the one I rebuilt back in 2012.   That is the one I got the new OEM piston from you and installed.    This saw seems to have really great compression and always cuts and runs great.   
PP 505, 475, 445.
Winner Winner x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21764
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 475
« Reply #338 on: March 14, 2018, 10:58:59 am »
Dang it's been that long since all that went down.   :o :o
REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21764
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 475
« Reply #339 on: March 14, 2018, 11:59:49 am »
I ended up ordering a set of those big west coast dawgs spikes that came with the full wraps.  Felt I could use them on the 505 with 32".   

I hated the small dawgs on the 385xp when using the 32" and wished I had had the bigger set on it. So getting a set while I still can for 505.

Guy I sold 385 to local first thing he did was pull the small dawgs and put on bigger dawgs with his 32" set up.
REDNECK Saw Repair Getter Done
Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
Poulan 365

Started by Cut4fun « 1 2 ... 16 17 » Poulan

169 Replies
4982 Views
Last post January 31, 2018, 07:59:31 pm
by stubnail67
Poulan 295 Porting

Started by Dh1984 « 1 2 » Poulan

11 Replies
1398 Views
Last post May 20, 2011, 08:55:11 am
by Dh1984
3 Replies
371 Views
Last post June 11, 2011, 05:25:29 pm
by Cut4fun
Poulan pro 236

Started by Cut4fun . « 1 2 3 4 5 » Poulan

48 Replies
1606 Views
Last post December 04, 2015, 10:59:11 am
by Cut4fun .
Poulan 1800

Started by Cut4fun . « 1 2 » Poulan

12 Replies
1179 Views
Last post December 23, 2013, 06:06:19 pm
by bustedknuckles
221 Replies
6470 Views
Last post June 21, 2018, 08:30:48 am
by Cut4fun .
4 Replies
526 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1152 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
2 Replies
206 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .
8 Replies
204 Views
Last post December 31, 2018, 09:04:53 am
by Cut4fun .