Author Topic: Poulan pro 5020 PR5020 Poulan 5020 4818  (Read 5451 times)

0 Members and 1 Guest are viewing this topic.

Offline Chris J.

  • 4 cube
  • **
  • Posts: 45
  • Karma: 3
  • Chainsaw Hoarder & Tinkerer
  • Location: Inescapeable abyss, Texas
Re: Poulan pro 5020
« Reply #10 on: September 11, 2012, 08:09:32 am »
Cut4Fun2,  thanks for the links!

I have the Craftsman version, model 358.35098;  from what I can tell it's the very same as the Poulan Pro PP5020AV,  except for the colors.   A small building supply warehouse near me had a bunch of returned Craftsman two-cycle equipment,  and I managed to get the only 358.35098 that they had.   I have no complaints for a hair under $60.00.
I'm a chainsaw hoarder & tinkerer.  The brand isn't usually important,  if the price is right I'll probably buy it.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20333
  • Karma: 443
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan pro 5020
« Reply #11 on: September 11, 2012, 09:51:34 am »
There's a 5020 around here for $75 but I cant get in contact with the seller. I just want to buy to test ride it.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20333
  • Karma: 443
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan pro 5020
« Reply #12 on: December 21, 2012, 04:38:01 pm »

I have the Craftsman version, model 358.35098;  from what I can tell it's the very same as the Poulan Pro PP5020AV,  except for the colors.   A small building supply warehouse near me had a bunch of returned Craftsman two-cycle equipment,  and I managed to get the only 358.35098 that they had.   I have no complaints for a hair under $60.00.

Are they still this price?

 Best I can find on  the craftsman 35098 50cc 20" is $120 shipped used return.


Just found a PP5020AV new shipped to the house for $170     

Specs manuals etc can be found below.

http://www.poulanpro.com/products/chain-saws/pp5020av/#tab-features
REDNECK Saw Repair Getter Done

Offline Chris J.

  • 4 cube
  • **
  • Posts: 45
  • Karma: 3
  • Chainsaw Hoarder & Tinkerer
  • Location: Inescapeable abyss, Texas
Re: Poulan pro 5020
« Reply #13 on: December 22, 2012, 02:12:08 pm »

I have the Craftsman version, model 358.35098;  from what I can tell it's the very same as the Poulan Pro PP5020AV,  except for the colors.   A small building supply warehouse near me had a bunch of returned Craftsman two-cycle equipment,  and I managed to get the only 358.35098 that they had.   I have no complaints for a hair under $60.00.

Are they still this price?

 Best I can find on  the craftsman 35098 50cc 20" is $120 shipped used return.


Just found a PP5020AV new shipped to the house for $170     

Specs manuals etc can be found below.

http://www.poulanpro.com/products/chain-saws/pp5020av/#tab-features


I was at the warehouse a several weeks back,  & they had sold all of the Craftsman equip.  When they had all of the Craftsman equip,  I only found one 358.35098 (5020).  I frequently see the Craftsman versions listed on eBay,  but the bidding varies,  one might bring $80.00 and another might bring $120.00.
I'm a chainsaw hoarder & tinkerer.  The brand isn't usually important,  if the price is right I'll probably buy it.

Offline oldpart

  • 3 cube
  • *
  • Posts: 11
  • Karma: 3
Re: Poulan pro 5020
« Reply #14 on: December 22, 2012, 04:03:25 pm »
I ordered some parts for this saw last week. Cheapest parts I've bought in a while. Easy Pull Start pulley kit(pulley, hub, EPS spring) was $1.41 my cost and a sprocket was around $3.00! Might ought to stock up. I need to ask someone how many they've built.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20333
  • Karma: 443
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan pro 5020
« Reply #15 on: February 27, 2013, 07:29:02 am »
I couldnt stand it no more.    Just bought a  PP5020AV so I could run and check one out for myself.
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4271
  • Karma: 249
  • Location: Carpenter, Wyoming
Re: Poulan pro 5020
« Reply #16 on: February 27, 2013, 10:43:36 am »
I couldnt stand it no more.    Just bought a  PP5020AV so I could run and check one out for myself.

Ha the curiosity finally got to you.   
Well I will be awaiting for what you think for a 50cc saw.
PP 505, 475, 445.

Offline Barneyrb

  • 4 cube
  • **
  • Posts: 26
  • Karma: 11
Re: Poulan pro 5020
« Reply #17 on: February 27, 2013, 01:33:13 pm »
I ordered some parts for this saw last week. Cheapest parts I've bought in a while. Easy Pull Start pulley kit(pulley, hub, EPS spring) was $1.41 my cost and a sprocket was around $3.00! Might ought to stock up. I need to ask someone how many they've built.

New OEM piston is ~$8....OOPS, gone up a little per Ordertree now is $9.18

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20333
  • Karma: 443
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan pro 5020
« Reply #18 on: February 27, 2013, 02:24:33 pm »
I couldnt stand it no more.    Just bought a  PP5020AV so I could run and check one out for myself.

Ha the curiosity finally got to you.   
Well I will be awaiting for what you think for a 50cc saw.

All I have read is that Mark said 5020 had less torque in the cut then the 330 and 330 was stronger. That is expected IMO considering the 5020 50cc and 330 54cc. 
 Just like the PP325 partner 5500 53cc is noticeably stronger and more torque in the cut then the partner 5000 49cc.
 or 45cc 346 compared to 50cc 346 same thing noticed.

I have a good running grey craftsman 49cc aka poulan 3000 with bare bore to compare to. 

1st thing I plan on doing is never installing the 20".  Going to put a 16" on from the get go in 3/8. Then maybe 325 later too since that is what the 3000 has on it. Will test with same set ups on both in 3/8 and 325.

What bar mount is on the 5020?  K041 or K095  ?
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4271
  • Karma: 249
  • Location: Carpenter, Wyoming
Re: Poulan pro 5020
« Reply #19 on: February 27, 2013, 04:32:04 pm »
K095 mount.
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
Poulan 505

Started by man of stihl « 1 2 ... 38 39 » Poulan

381 Replies
7770 Views
Last post November 16, 2018, 11:41:48 am
by Cut4fun .
Poulan 425

Started by Cut4fun « 1 2 » Poulan

15 Replies
989 Views
Last post March 18, 2014, 02:19:35 pm
by Cut4fun .
4 Replies
430 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
821 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
9 Replies
351 Views
Last post July 09, 2013, 04:07:30 pm
by moparman texas
3 Replies
249 Views
Last post March 09, 2013, 06:49:38 pm
by Cut4fun .
11 Replies
430 Views
Last post March 16, 2014, 04:12:43 pm
by Cut4fun .
1 Replies
107 Views
Last post May 14, 2015, 03:29:42 pm
by 660magnum
10 Replies
255 Views
Last post April 27, 2016, 02:22:24 pm
by deezlfan
2 Replies
150 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .